journal article·2023-08

Bandgap grading via sputtering and post-selenization using SeS2 powder enabling Sb2(S,Se)3 solar cells with 7.1% efficiency

Yi-Cheng Lin, Chao-Hsuan Chang, Yu-Jen Hung

Publisher page

Abstract

This paper describes the fabrication of bandgap grading Sb 2(S,Se) 3 solar cells via sputtering and post-selenization/sulfurization using SeS 2 powder as a sulfur source. The material characteristics and photovoltaic performances of the solar cells were assessed as functions of S/(S + Se) ratio. In experiments, an appropriate S/(S + Se) ratio resulted in grains with the preferred vertical orientation and fewer grain boundaries (GB) to hinder carrier transport, which together reduced charge transfer resistance. A suitable S/(S + Se) ratio also resulted in an S depth profile with a V-shaped distribution, which allowed bandgap grading in the depletion region. An excessively high S/(S + Se) ratio gradually altered the energy band at GBs from downward bending to upward bending, which increased the likelihood of electron-hole recombination at GBs. A high S/(S + Se) ratio also promoted excessive grain growth in various directions, which increased surface roughness and prevented the uniform coverage of the CdS layer, thereby reducing device performance. The optimal S/(S + Se) ratio of 0.27 resulted in a power conversion efficiency (PCE) of 7.1%, which is a new efficiency record for antimony chalcogenide-based thin film solar cells prepared via sputtering and post-selenization.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Development of antimony sulfide-selenide Sb2(S,Se)3-based solar cells10.1016/j.jechem.2017.09.031 ↗
2. The state of the art of Sb2(S,Se)3 thin film solar cells: current progress and future prospect10.1088/1361-6463/ac5f32 ↗
3. In situ sulfurization to generate Sb2(Se1-xSx)3 alloyed films and their application for photovoltaics10.1002/pip.2819 ↗
4. A new approach to high-efficiency solar cells by bandgap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
5. Gradient bandgap modification for highly efficient carrier transport in antimony sulfide-selenide tandem solar cells10.1016/j.solmat.2022.111926 ↗
6. Manipulating the electrical properties of Sb2(S,Se)3 film for high-efficiency solar cell10.1002/aenm.202002341 ↗
7. Regulating energy band alignment via alkaline metal fluoride assisted solution post-treatment enabling Sb2(S,Se)3 solar cells with 10.7% efficiency
8. Hydrazine hydrate-induced surface modification of CdS electron transport layer enables 10.30%-efficient Sb2(S,Se)3 planar solar cells
9. 9.7%-efficient Sb2(S,Se)3 solar cells with a dithieno [3,2-b: 2′,3′-d] pyrrole-cored hole transporting material10.1039/D0EE02239J ↗
10. 9.6%-Efficient all-inorganic Sb2(S,Se)3 solar cells with a MnS hole-transporting layer10.1039/D1TA09913B ↗
11. High-efficiency Sb2(S,Se)3 solar cells with MoO3 as a hole-transport layer10.1016/j.jallcom.2022.166842 ↗
12. Fabrication of closed-space sublimation Sb2(S1-xSex)3 thin-film based on a single mixed powder source for photovoltaic application10.1016/j.optmat.2021.111659 ↗
13. Bandgap and defect engineering for high-performance cadmium-free Sb2(S,Se)3 solar cells and modules10.1002/adfm.202209601 ↗
14. Fabricating over 7 %-efficient Sb2(S,Se)3 thin-film solar cells by vapor transport deposition using Sb2Se3 and Sb2S3 mixed powders as the evaporation source10.1016/j.jpowsour.2021.229737 ↗
15. Vapor transport deposition of highly efficient Sb2(S,Se)3 solar cells via controllable orientation growth
16. Vapor transport deposition of Sb2(S,Se)3 solar cells with continuously tunable bandgaps10.1021/acsaem.2c00790 ↗
17. Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film10.1016/j.nanoen.2019.103929 ↗
18. An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cells10.1016/j.cej.2020.124599 ↗
19. Spark plasma sintering of Sb2Se3 sputtering target towards highly efficient thin film solar cells10.1016/j.solmat.2020.110530 ↗
20. Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV10.1016/j.nanoen.2020.104806 ↗
21. Controlled sputtering pressure on high-quality Sb2Se3 thin film for substrate configurated solar cells10.3390/nano10030574 ↗
22. Magnetron sputtered Sb2Se3-based thin films towards high performance quasi-homojunction thin film solar cells10.1016/j.solmat.2019.110154 ↗
23. Fabrication of Sb2Se3 thin film solar cells by co-sputtering of Sb2Se3 and Se targets10.1016/j.solener.2019.09.046 ↗
24. Enhanced open circuit voltage of Sb2Se3/CdS solar cells by annealing Se-rich amorphous Sb2Se3 films prepared via sputtering process10.1016/j.solener.2019.11.072 ↗
25. Reducing the formation of Sb2O3 phase and selenium vacancy in Sb2Se3 thin film solar cells via hydrogen-assisted selenization10.1016/j.solmat.2021.111520 ↗
26. A band-gap-graded CZTSSe solar cell with 12.3 % efficiency
27. Enhancing photocurrent of Cu(In,Ga)Se2 solar cells with actively controlled Ga grading in the absorber layer10.1016/j.nanoen.2019.05.052 ↗
28. Improving the efficiency of a Cu2ZnSn(S,Se)4 solar cell using a non-toxic simultaneous selenization/sulfurization process10.1016/j.mssp.2017.11.005 ↗
29. Factors controlling the SO2 removal by porous carbons: relevance of the SO2 oxidation step10.1016/S0008-6223(99)00109-8 ↗
30. Deciphering the role of key defects in Sb2Se3, a promising candidate for chalcogenide-based solar cells10.1021/acsaem.9b02192 ↗
31. Sb2(Se1-xSx)3 thin-film solar cells fabricated by single-source vapor transport deposition10.1002/solr.201800280 ↗
32. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10 % efficiency10.1038/s41560-020-0652-3 ↗
33. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
34. Analysis of a novel method of alkalis treatment: effect on energy band optimization and carrier recombination at the grain boundary10.1016/j.solmat.2022.112007 ↗
35. A direct measurement of higher photovoltage at grain boundaries in CdS/CZTSe solar cells using KPFM technique10.1016/j.solmat.2018.01.040 ↗
36. Water additive enhanced solution processing of alloy‐Sb2 (S1‐x Sex)3 based solar cells10.1002/solr.201900582 ↗
37. 5.91%-efficient Sb2Se3 solar cells with a radio-frequency magnetron-sputtered CdS buffer layer10.1016/j.apmt.2019.06.001 ↗