Characterizing photovoltaic backsheet adhesion degradation using the wedge and single cantilever beam tests, Part II: Accelerated tests
Source abstract
Abstract
Photovoltaic (PV) backsheets provide critical moisture, mechanical, and electrical insulation to the backside of PV modules, but their continued functionality depends upon their ability to remain well adhered over years of harsh environmental exposure. A study of adhesive strength was conducted on several PV backsheet types exposed to indoor accelerated weathering. Two adhesion tests – the wedge test and single cantilever beam test – were used to measure adhesion energy in four backsheets: two with fluoropolymer-based outer (airside) layers – polyvinyl fluoride (PVF), polyvinylidene fluoride (PVDF) – and two with non-fluoropolymer-based outer layers–polyamide (PA) and polyethylene terephthalate (PET). The effects of changes in temperature, ultraviolet (UV) irradiance, relative humidity, and a periodic water spray were studied. The PET-, PVF- and PVDF-based backsheets all showed instances of debonding in an adhesive layer, which is commonly reported. For the PA-, PET-, and PVDF-based backsheets, adhesion energy dropped fairly rapidly with exposure, reaching very low levels by 4000 h. The PVF-based backsheet was relatively robust to weathering. Pull-off of an outer chalking layer in the PA- and PET-based backsheets suggested a sensitivity to UV. Adhesion in these two backsheets was also highly sensitive to changes in moisture level. Changes in UV irradiance and temperature did not show a statistically significant effect on adhesion loss for the exposure levels used. The present work is part of a two-part adhesion study on both field-weathered and indoor-exposed backsheets, and forms a basis for understanding adhesion degradation across a variety of backsheet types and degradation factors.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · solar cell performance optimization · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. 2019
2. Terawatt-scale photovoltaics: Transform global energy10.1126/science.aaw1845 ↗
3. Trube · 2019
4. Towards large-scale deployment of bifacial photovoltaics10.1038/s41560-018-0178-0 ↗
5. Structure and basic properties of photovoltaic module backsheet films10.1016/j.solmat.2015.09.060 ↗
6. Tearing and reliability of photovoltaic module backsheets10.1002/pip.3144 ↗
7. Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: A literature review10.1016/j.solmat.2018.12.027 ↗
8. Aging mechanisms of polymeric films for PV encapsulation10.1016/j.solener.2005.02.008 ↗
9. Weathering and durability of PV backsheets and impact on PV module performance
10. Understanding degradation mechanisms and improving stability of perovskite photovoltaics10.1021/acs.chemrev.8b00336 ↗
11. Multiphysics analysis of backsheet blistering in photovoltaic modules10.1016/j.solener.2019.03.050 ↗
12. Enabling reliability assessments of pre-commercial perovskite photovoltaics with lessons learned from industrial standards10.1038/s41560-018-0174-4 ↗
13. Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets
14. Correlation study of damp heat and pressure cooker testing on backsheets10.1002/app.44230 ↗
15. Impact of environmental variables on the degradation of photovoltaic components and perspectives for the reliability assessment methodology10.1016/j.solener.2020.02.020 ↗
16. A comparison of key PV backsheet and module performance from fielded module exposures and accelerated tests10.1109/JPHOTOV.2014.2305472 ↗
17. Optical properties of PV backsheets: key indicators of module performance and durability
18. Module accelerated stress testing and prediction of field performance
19. Development of testing methods to predict cracking in photovoltaic backsheets
20. Aging induced cracking of polymeric backsheets: Analytical approach to identify the drivers
21. Error analysis of aged modules with cracked polyamide backsheets10.1016/j.solmat.2019.110194 ↗
22. Delamination behaviour of multi-layer films for PV encapsulation10.1016/j.solmat.2005.02.009 ↗
23. Commonly observed degradation in field-aged photovoltaic modules
24. Photovoltaic module performance and durability following long-term field exposure10.1002/(SICI)1099-159X(200003/04)8:2<241::AID-PIP290>3.0.CO;2-D ↗
25. Equating damp heat testing with field failures of PV modules
26. Analysis of degradation mechanisms of crystalline silicon PV modules after 12 years of operation in southern europe10.1002/pip.1083 ↗
27. Encapsulation and backsheet adhesion metrology for photovoltaic modules10.1002/pip.2817 ↗
28. Characterizing photovoltaic backsheet adhesion degradation using the wedge and single cantilever beam tests, Part I: Field Modules
29. Defining threshold values of encapsulant and backsheet adhesion for PV module reliability
30. 2015
31. 2016
32. 2017
33. Moisture transport, adhesion, and corrosion protection of PV module packaging materials10.1016/j.solmat.2006.04.003 ↗
34. Pern · 2003
35. Enhanced adhesion of EVA laminates to primed glass substrates subjected to damp heat exposure
36. Acetic acid production and glass transition concerns with ethylene-vinyl acetate used in photovoltaic devices10.1016/j.solmat.2006.10.009 ↗
37. 2019
38. Compressive-shear adhesion characterization of polyvinyl-butyral and ethylene-vinyl acetate at different curing times before and after exposure to damp-heat conditions10.1002/pip.2270 ↗
39. Diagnostic analysis of silicon photovoltaic modules after 20-year field exposure
40. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
41. Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling10.1039/C7EE02564E ↗
42. Environmental mechanisms of debonding in photovoltaic backsheets10.1016/j.solmat.2013.08.020 ↗
43. Adhesion and debonding kinetics of photovoltaic encapsulation in moist environments10.1002/pip.2657 ↗
44. Evaluating and predicting molecular mechanisms of adhesive degradation during field and accelerated aging of photovoltaic modules10.1002/pip.3045 ↗
45. Investigation of a wedge adhesion test for edge seals
46. 2018
47. 2016
48. 2016
49. Accelerated testing and modeling of potential-induced degradation as a function of temperature and relative humidity10.1109/JPHOTOV.2015.2466463 ↗
50. Evaluation of the durability of flexible barrier materials
51. Impact of UV light intensity on photodegradation of PV backsheets
52. 2017
53. Measurement of crack length in width tapered beam experiments
54. Depth profiling of degradation of multilayer photovoltaic backsheets after accelerated laboratory weathering: Cross-sectional raman imaging10.1016/j.solmat.2015.09.021 ↗
55. Spectroscopic investigations on thin adhesive layers in multi-material laminates10.1366/13-07291 ↗
56. Evaluation of temperature and humidity on PV module component degradation
57. Advance solar technology by marrying quality assurance with design engineering10.1038/s41560-018-0241-x ↗