journal article·2021-08

Construction of 1D perovskite nanowires by Urotropin passivation towards efficient and stable perovskite solar cell

Parisa Zardari, Ali Rostami

Publisher page

Abstract

Abstract The instability issue of perovskite solar cells (PSCs) is still an unsettled problem that restricts its further commercialization. A hybrid dimension structure built by one-dimensional and three-dimensional perovskites (1D-3D) is an efficient strategy for improving the stability of PSCs. Herein, self-assembled 1D perovskite nanowires (1D-PNWs) have been successfully constructed by introducing a small amount of Urotropin (UTP) into the perovskite precursor solution used in a two-step preparation method that leads to passivate grain boundaries and thereby improves film crystallinity and reduced defects. The photovoltaic performance of the modified PSC at the optimum amount of UTP (5% molar percentage) has been significantly improved concerning the control devices due to the suppression of non-radiative recombination in the defects and GBs. The power conversion efficiency (PCE) of the optimum device increased from 11.47% to 19.15% with negligible hysteresis. This device was more stable than the control device, with only 5.08% PCE decline within 42 days in a relative humidity level of 38 ± 2 without encapsulation. This study introduces the 1D-PNW network growth by a self-assembly process to provide a feasible and effective strategy to fabricate cheap and extra stable perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Enhancing electron diffusion length in narrow-bandgap perovskites for efficient monolithic perovskite tandem solar cells10.1038/s41467-019-12513-x ↗
2. Synergistic effect of MACl and DMF towards efficient perovskite solar cells10.1016/j.orgel.2020.106005 ↗
3. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
4. Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells10.1021/ja5033259 ↗
5. Natural passivation of the perovskite layer by oxygen in ambient air to improve the efficiency and stability of perovskite solar cells simultaneously10.1016/j.orgel.2020.106007 ↗
6. Highly stable perovskite solar cells based on perovskite/NiO-graphene composites and NiO interface with 25.9 mA/cm2 photocurrent density and 20.8% efficiency10.1016/j.nanoen.2020.105452 ↗
7. Passivation of defects in perovskite solar cell: from a chemistry point of view10.1016/j.nanoen.2020.105237 ↗
8. Cesium decreases defect density and enhances optoelectronic properties of mixed MA1–xCsxPbBr3 single crystal10.1021/acs.jpcc.9b03987 ↗
9. p-Phenylenediaminium iodide capping agent enabled self-healing perovskite solar cell10.1038/s41598-020-76365-y ↗
10. Single-crystal perovskite detectors: development and perspectives
11. Bottom-contact passivation for high-performance perovskite solar cells using TaCl5-doped SnO2 as electron-transporting layer10.1016/j.orgel.2020.105972 ↗
12. Simultaneously enhanced moisture tolerance and defect passivation of perovskite solar cells with cross-linked grain encapsulation10.1016/j.jechem.2020.08.020 ↗
13. Inorganic material passivation of defects toward efficient perovskite solar cells10.1016/j.scib.2020.07.017 ↗
14. Highly-stable tin-based perovskite nanocrystals produced by passivation and coating of gelatin10.1016/j.jhazmat.2020.123967 ↗
15. Tailoring multifunctional passivation molecules with halogen functional groups for efficient and stable perovskite photovoltaics
16. New strategies for defect passivation in high-efficiency perovskite solar cells10.1002/aenm.201903090 ↗
17. Highly efficient perovskite solar cells enabled by multiple ligand passivation10.1002/aenm.201903696 ↗
18. Strategies for stable water splitting via protected photoelectrodes10.1039/C6CS00918B ↗
19. Recent advances toward high-efficiency halide perovskite light-emitting diodes: review and perspective10.1002/smtd.201700419 ↗
20. Surface defect dynamics in organic–inorganic hybrid perovskites: from mechanism to interfacial properties10.1021/acsnano.9b06585 ↗
21. Controllable self-Induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
22. Enhanced photoluminescence and solar cell performance via lewis base passivation of organic–inorganic lead halide perovskites10.1021/nn5036476 ↗
23. Imperfections and their passivation in halide perovskite solar cells10.1039/C8CS00853A ↗
24. Efficient defect passivation of perovskite solar cells via stitching of an organic bidentate molecule10.1039/C9SE01041F ↗
25. Pyridine-Induced dimensionality change in hybrid perovskite nanocrystals10.1021/acs.chemmater.7b00872 ↗
26. Ligand structure directed dimensionality reduction (2D →1D) in lead bromide perovskite10.1021/acs.jpcc.9b11033 ↗
27. Direct conversion of perovskite thin films into nanowires with kinetic control for flexible optoelectronic devices10.1021/acs.nanolett.5b03504 ↗
28. Nanowire perovskite solar cell10.1021/acs.nanolett.5b00046 ↗
29. New insight into the formation of hybrid Perovskite nanowires via structure directing adducts10.1021/acs.chemmater.6b03965 ↗
30. Large-area perovskite nanowire arrays fabricated by large-scale roll-to-roll micro-gravure printing and doctor blading10.1039/C5NR08277C ↗
31. Remarks on the value of urotropin and its practical applicatiob as a urinary anyiseptic10.1016/S0140-6736(01)71742-4 ↗
32. Growth of ZnO nanostructures with different morphologies by using hydrothermal technique10.1021/jp063312i ↗
33. Effects of urotropin on the chemical and microstructural properties of Fe-oxide powders prepared by the hydrolysis of aqueous FeCl3 solutions10.1016/S0254-0584(97)02032-4 ↗
34. The thermal behavior of amorphous rhodium hydrous oxide10.1016/S0925-8388(01)00938-0 ↗
35. Synthesis, structure and luminescent properties of metal–organic frameworks constructed from unique Zn- and Cd-containing secondary building blocks10.1016/j.poly.2013.03.031 ↗
36. Photochemistry of supramolecular complex formed by trans-stilbene and the metal–organic coordination polymer10.1016/j.ica.2013.09.048 ↗
37. Reducing trap density and carrier concentration by a Ge additive for an efficient quasi 2D/3D perovskite solar cell10.1039/C9TA11989B ↗
38. Moisture proof hole transport layers based on CISe quantum dots for highly stable and large active area perovskite solar cells10.1016/j.apsusc.2019.143610 ↗
39. Surface passivation of perovskite solar cells toward improved efficiency and stability10.1007/s40820-019-0282-0 ↗
40. Pb clustering and PbI2 nanofragmentation during methylammonium lead iodide perovskite degradation10.1038/s41467-019-09909-0 ↗
41. Highly efficient and humidity stable perovskite solar cells achieved by introducing perovskite-like metal formate material as the nanocrystal scaffold10.1016/j.jpowsour.2018.07.014 ↗
42. Strong covalency-induced recombination centers in perovskite solar cell material CH3NH3PbI310.1021/ja5079305 ↗
43. Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering10.1039/C7CS00868F ↗
44. Thermodynamically self-healing 1D–3D hybrid perovskite solar cells10.1002/aenm.201703421 ↗
45. One-dimensional organic lead halide perovskites with efficient bluish white-light emission10.1038/ncomms14051 ↗
46. Construction of nanowire CH3NH3PbI3-based solar cells with 17.62% efficiency by solvent etching technique10.1016/j.solmat.2017.04.018 ↗
47. Understanding how excess lead iodide precursor improves halide perovskite solar cell performance10.1038/s41467-018-05583-w ↗
48. Nature of photoinduced quenching traps in methylammonium lead triiodide perovskite revealed by reversible photoluminescence decline10.1021/acsphotonics.7b01537 ↗
49. Tailoring mixed-halide, wide-gap perovskites via multistep conversion process10.1021/acsami.6b01246 ↗
50. Enhancement of open circuit voltage for CuSCN-based perovskite solar cells by controlling the perovskite/CuSCN interface with functional molecules10.1039/C8TA12217B ↗
51. Improvement of CH3NH3PbI3 formation for efficient and better reproducible mesoscopic perovskite solar cells10.1021/acsami.5b07446 ↗
52. Kang · 2019 · vol. 31 · 1805214
53. Defects in perovskite-halides and their effects in solar cells10.1038/nenergy.2016.149 ↗
54. Trap-assisted non-radiative recombination in organic–inorganic perovskite solar cells10.1002/adma.201405372 ↗
55. Improved performance and air stability of planar perovskite solar cells via interfacial engineering using a fullerene amine interlayer10.1016/j.nanoen.2016.08.048 ↗
56. Amine treatment induced perovskite nanowire network in perovskite solar cells: efficient surface passivation and carrier transport10.1088/1361-6528/aaa054 ↗
57. Role of the selective contacts in the performance of lead halide perovskite solar cells10.1021/jz500059v ↗
58. Impedance spectroscopic indication for solid state electrochemical reaction in (CH3NH3)PbI3 Films10.1021/acs.jpclett.5b02618 ↗
59. Effect of indium ratio in CuInxGa1-xS2/carbon hole collecting electrode for perovskite solar cells10.1016/j.jpowsour.2020.228658 ↗