Designing functional Σ13 grain boundaries at seed junctions for high-quality cast quasi-single crystalline silicon
Source abstract
Abstract
Abstract Dislocation clusters and sub-grain boundaries (Sub-GBs) induced by the misorientation between adjacent seeds are destructive to the quasi-single crystal (QSC) Si ingot quality and the solar cell efficiency. Here, we have designed an artificial Σ13 GB between two adjacent -oriented seeds at the crucible bottom. It is found that the generation of dislocation clusters and sub-GBs from the seed junctions is significantly suppressed owing to the low energy barrier potential of the Σ13 GB. Although some twins could generate from the vertical Σ13 GB, they will not give a bad influence on the ingot quality. The efficiency of solar cells is absolutely high in industrial circles, with an average value of 20.1%. These results pave a new way to the fabrication of high quality QSC-Si ingots for photovoltaic application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Casting single crystal silicon: novel defect profiles from BP solar''s mono2 TM wafers
2. Nucleation and bulk growth control for high efficiency silicon ingot casting10.1016/j.jcrysgro.2010.10.103 ↗
3. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
4. Improved multicrystalline silicon ingot crystal quality through seed growth for high efficiency solar cells10.1002/pip.1221 ↗
5. The characteristics of sub-grains in the mono-like silicon crystals grown with directional solidification method
6. In situ investigation of the structural defect generation and evolution during the directional solidification of ⟨110⟩ seeded growth Si10.1016/j.actamat.2016.06.004 ↗
7. Comparison of defect formations in solar silicon growth from small random and large oriented seeds10.1016/j.jcrysgro.2015.02.087 ↗
8. Defect formation induced by seed-joints during directional solidification of quasi-mono-crystalline silicon ingots10.1016/j.jcrysgro.2014.08.002 ↗
9. Mono-crystalline growth in directional solidification of silicon with different orientation and splitting of seed crystals10.1016/j.jcrysgro.2012.04.035 ↗
10. Mono-like silicon ingots grown on low angle misoriented seeds: defect characterization by synchrotron X-ray diffraction imaging10.1016/j.actamat.2015.01.012 ↗
11. Influence of grain boundaries intentionally induced between seed plates on the defect generation in quasi-mono-crystalline silicon ingots10.1002/crat.201400226 ↗
12. Seed manipulation for artificially controlled defect technique in new growth method for quasi-monocrystalline Si ingot based on casting10.7567/APEX.8.105501 ↗
13. Higher quality mono-like cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
14. Effect of seed arrangements on the quality of n-type monolike silicon grown by directional solidification10.1021/acs.cgd.6b01317 ↗
15. Dislocation etch for (100) planes in Silicon10.1149/1.2404374 ↗
16. Evaluation of defects generation in crystalline silicon ingot grown by cast technique with seed crystal for solar cells10.1063/1.3700250 ↗
17. Distribution and propagation of dislocation defects in quasi-single crystalline silicon ingots cast by the directional solidification method10.1016/j.solmat.2014.08.022 ↗
18. Characterization of silicon ingots: mono-like versus high-performance multicrystalline10.7567/JJAP.54.08KD10 ↗
19. Characterization of defects in mono-like silicon wafers and their effects on solar cell efficiency10.1016/j.solmat.2013.09.020 ↗
20. Sub-grain boundaries sources and effects in large Mono-like Silicon ingots for PV
21. Modeling the effect of dislocations on the minority carrier diffusion length of a semiconductor10.1063/1.368378 ↗
22. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
23. Grain-boundary metastability and its statistical properties10.1016/j.actamat.2015.11.035 ↗
24. EBIC and TEM analysis of the electrical activity of Σ = 25 and Σ = 13 silicon bicrystals after thermal treatments10.1002/pssa.2211410108 ↗