journal article·2014-08Open access

Fabrication of efficient organic and hybrid solar cells by fine channel mist spray coating

Jae-hyeong Lee, Susumu Yoshikawa, Takashi Sagawa

Abstract

Three types of organic and hybrid photovoltaics, which include poly(3-hexylthiophene) (P3HT), [6, 6]-phenyl C61 butyric acid methyl ester (PCBM) and zinc oxide (ZnO) in their active layer as normal, inverted and hybrid solar cells, were prepared by fine-channel mist-spray coating in air. In particular, we investigated the donor/acceptor blending effect for increasing reproducibility in normal type, annealing temperature control for more effective ZnO layer in inverted type solar cells. Patterns of sparse and vertical distribution by solvent polarity were discussed in fabrication for hybrid solar cells. Consequently, enough blending of donor/acceptor solution, the combination of pre/post-heat treatment for ZnO layer and trade-off relation between crystallization of ZnO and ordering of the P3HT matrix were factors to be considered for enhanced results in terms of high photovoltaic performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
2. All polymer photovoltaics: from small inverted devices to large roll-to-roll coated and printed solar cells10.1016/j.solmat.2013.01.025 ↗
3. Hybrid solar cells10.1016/j.ica.2007.06.042 ↗
4. Polymer solar cells
5. Nanoparticle–polymer photovoltaic cells10.1016/j.cis.2007.09.001 ↗
6. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
7. Organic tandem solar cells: a review10.1039/b817952b ↗
8. Organic photovoltaics10.1039/b812502n ↗
9. ‘Plastic’ solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
10. Vertically-aligned nanostructures of ZnO for excitonic solar cells: a review10.1039/B811536B ↗
11. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
12. On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells10.1039/b823495g ↗
13. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
14. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
15. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
16. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
17. 10.2% Power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
18. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
19. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
20. Stability of the interface between indium–tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
21. High-performance hole-transport layers for polymer light-emitting diodes. implementation of organosiloxane cross-linking chemistry in polymeric electroluminescent devices10.1021/ja044455q ↗
22. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
23. Efficient inverted organic solar cells without an electron selective layer10.1039/c0jm04269b ↗
24. Blocking reactions between indium–tin oxide and poly (3,4-ethylene dioxythiophene):poly(styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
25. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
26. Fast screening of the optimal polymer ratio for organic solar cells using a spray-coating deposition method for the fullerene mixture10.1002/ente.200011 ↗
27. A sol–gel method to prepare pure and gold colloid doped ZnO films10.1016/S0040-6090(03)00057-9 ↗
28. Effect of preheating temperature on structural and optical properties of ZnO thin films by sol–gel process10.1016/j.tsf.2005.06.013 ↗
29. Flexible inverted polymer solar cells on polyethylene terephthalate substrate containing zinc oxide electron-collection-layer prepared by novel sol–gel method and low-temperature treatments10.1016/j.orgel.2012.03.015 ↗
30. Inverted polymer solar cells including ZnO electron transport layer fabricated by facile spray pyrolysis10.1016/j.solmat.2013.05.062 ↗
31. Inorganic–organic hybrid solar cell: bridging quantum dots to conjugated polymer nanowires10.1021/nl202435t ↗
32. Photovoltaic devices with a low band gap polymer and CdSe nanostructures exceeding 3% efficiency10.1021/nl903406s ↗
33. Fullerene contribution to photocurrent generation in organic photovoltaic cells10.1021/jp2007683 ↗
34. Efficiency enhancement for bulk-heterojunction hybrid solar cells based on acid treated CdSe quantum dots and low bandgap polymer PCPDTBT10.1016/j.solmat.2010.12.041 ↗
35. Performance enhancement of CdSe nanorod-polymer based hybrid solar cells utilizing a novel combination of post-synthetic nanoparticle surface treatments10.1016/j.solmat.2011.11.049 ↗
36. Theory of the quantum confinement effect on excitons in quantum dots of indirect-gap materials10.1103/PhysRevB.46.15578 ↗
37. Fabrication of bulk heterojunction plastic solar cells by screen printing10.1063/1.1413501 ↗
38. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
39. Polymer solar cells based on inkjet-printed PEDOT:PSS layer10.1016/j.orgel.2009.01.015 ↗
40. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
41. Factors to be considered in bulk heterojunction polymer solar cells fabricated by the spray process10.1109/JSTQE.2010.2042282 ↗
42. Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
43. Solvent annealing induced perpendicular orientation of cylindrical microdomains in polystyrene-b-poly(4-hydroxyl styrene)/PEG oligomer blend thin film made by spin-coating from selective solvent
44. Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition10.1063/1.2836267 ↗
45. Facile external treatment for efficient nanoscale morphology control of polymer solar cells using a gas-assisted spray method10.1039/c0jm03899g ↗
46. Airbrush spray-coating of polymer bulk-heterojunction solar cells10.1016/j.solmat.2011.01.047 ↗
47. Morphological and topographical characterizations in spray coated organic solar cells using an additional solvent spray deposition10.1016/j.orgel.2011.09.009 ↗
48. Efficient electron collection in hybrid polymer solar cells: in-situ-generated ZnO/poly(3-hexylthiophene) scaffolded by a TiO2 nanorod array10.1021/jz400996d ↗
49. Ultrasonic spray deposition for production of organic solar cells10.1016/j.solmat.2008.10.026 ↗
50. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
51. Effect of trace solvent on the morphology of P3HT:PCBM bulk heterojunction solar cells10.1002/adfm.201002372 ↗
52. ‘Solvent annealing’ effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
53. Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating10.1021/am100505e ↗
54. Thickness dependence of photovoltaic performance of additional spray coated solar cells10.1016/j.tsf.2012.07.080 ↗
55. X-ray structural studies of poly(3-alkylthiophenes): an example of an inverse comb10.1021/ma00043a019 ↗
56. Characterization of polymer solar cells by TOF-SIMS depth profiling10.1016/S0169-4332(02)00756-0 ↗
57. Sol–gel synthesis and characterisation of ZnO-based nanosystems10.1016/S0040-6090(01)01158-0 ↗
58. Influence of pH value on the quality of sol–gel derived ZnO films10.1016/j.apsusc.2006.12.026 ↗
59. Sol–gel preparation of ZnO films with extremely preferred orientation along (002) plane from zinc acetate solution10.1016/S0040-6090(97)00231-9 ↗
60. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
61. Substrate dependence of preferred orientation in sol–gel-derived zinc oxide films10.1016/j.matlet.2004.09.002 ↗
62. Zinc oxide films prepared by sol–gel spin-coating10.1016/S0040-6090(00)01056-7 ↗
63. ZnO thin films prepared by a single step sol–gel process10.1016/j.tsf.2007.03.160 ↗
64. Patterned transparent zinc oxide films produced by sol–gel embossing10.1002/pssa.200778853 ↗
65. Effective variables to control the fill factor of organic photovoltaic cells10.1021/am900155y ↗
66. Structural properties and stress in ZnO films obtained from a nanocolloidal sol10.1023/B:JSST.0000023852.75244.49 ↗
67. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells10.1002/adfm.201101915 ↗
68. Self-orienting head-to-tail poly(3-alkylthiophenes): new insights on structure–property relationships in conducting polymers10.1021/ja00064a070 ↗
69. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by Rieke zinc: their characterization and solid-state properties10.1021/ja00106a027 ↗
70. Integrated optoelectronic devices based on conjugated polymers10.1126/science.280.5370.1741 ↗
71. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗