Process challenges of high-performance silicon heterojunction solar cells with copper electrodes
Source abstract
Abstract
Substitution of expensive silver paste becomes essential for mass production of silicon heterojunction (SHJ) solar cell, which calls for high efficiency and low-cost metallization techniques. Copper metallization together with multi-busbar cell interconnection is considered as effective way to low shading loss and electrode ohmic loss. While, the electrode adhesion and parasitic plating are the key process challenges limiting the copper metallization of SHJ solar cells. In this research, the copper plated SHJ solar cells with high electrode aspect ratio and an efficiency of 23.35% have been achieved on M2 wafers. The SEM images show the holes in the plated layers will deteriorate the adhesion between plated copper and seed-layer. The glass/back sheet structure (GBS) modules have been laminated to evaluate the influence of parasitic plating on damp-heat (DH) performance. The degradation in output power ( P max) is up to 4.90%, which is primarily due to a decreased open-circuit voltage ( V oc) and fill factor ( FF ). It can be ascribed to the deteriorated surface recombination and interconnection. Although the parasitic plating on the wafer edge has ignorable influence on damp heat test after etch-back process, it is still necessary to protect the cell edge to avoid parasitic plating. The research evaluates the process challenges of copper metallization of SHJ solar cells, which offers a refer for achieving high reliability and low levelized cost of energy (LCOE) of photovoltaic power generation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Technological learning for resource efficient terawatt scale photovoltaics10.1039/D1EE02497C ↗
2. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
3. Future challenges for photovoltaic manufacturing at the terawatt level10.1063/5.0020380 ↗
4. Improved amorphous/crystalline silicon interface passivation for silicon heterojunction solar cells by hot-wire atomic hydrogen during doped a-Si:H deposition10.1016/j.apsusc.2018.12.239 ↗
5. Low-resistivity p-type a-Si:H/AZO hole contact in high-efficiency silicon heterojunction solar cells10.1016/j.apsusc.2020.148749 ↗
6. High-performance hetero-junction crystalline silicon photovoltaic technology
7. High-efficiency silicon heterojunction solar cells: a review10.1515/green-2011-0018 ↗
8. Yu · 2014
9. Development of copper electroplating technique for silicon heterojunction solar cells with efficiency over 23.1%
10. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
11. Silicon heterojunction solar cells with copper-plated grid electrodes: status and comparison with silver thick-film techniques10.1109/JPHOTOV.2014.2321663 ↗
12. Laser transfer and firing of NiV seed layer for the metallization of silicon heterojunction solar cells by Cu-plating10.1002/solr.201700085 ↗
13. In-situ formation of indium seed layer for copper metallization of silicon heterojunction solar cells10.1016/j.solmat.2019.110243 ↗
14. Copper-nickel alloy plating to improve the contact resistivity of metal grid on silicon heterojunction solar cells10.1007/s13391-019-00134-x ↗
15. Improvement of ohmic contact between the indium tin oxide and copper-plated contact of solar cells by using the Cu-Sn alloy film10.1166/jnn.2020.17291 ↗
16. Novel plating processes for silicon heterojunction solar cell metallization using a structured seed layer10.1109/JPHOTOV.2017.2748999 ↗
17. Realization of micropatterned, narrow line-width Ni-Cu-Sn front contact grid pattern using maskless direct-write lithography for industrial silicon solar cells10.1021/acsaem.1c01699 ↗
18. Screen-printed masking of transparent conductive oxide layers for copper plating of silicon heterojunction cells10.1016/j.apsusc.2015.05.085 ↗
19. Hydrophobic AlOx surfaces by adsorption of a SAM on large areas for application in solar cell metallization patterning10.1021/acsami.0c20134 ↗
20. Patterning and formation of copper electroplated contact for bifacial silicon hetero-junction solar cell10.1016/j.solener.2017.02.022 ↗
21. Native oxide barrier layer for selective electroplated metallization of silicon heterojunction solar cells10.1002/solr.201900006 ↗
22. Effects of SiOx barrier layer prepared by plasma-enhanced chemical vapor deposition on improvement of long-term reliability and production cost for Cu-plated amorphous Si/crystalline Si heterojunction solar cells10.1016/j.solmat.2016.12.029 ↗
23. Dual-function light-trapping: selective plating mask of SiOx/SiNx stacks for silicon heterojunction solar cells10.1002/solr.201800261 ↗
24. Maxwell
25. Copper metallization of electrodes for silicon heterojunction solar cells: process, reliability and challenges10.1016/j.solmat.2021.110993 ↗
26. 23% high-efficiency tunnel oxide junction bifacial solar cell with electroplated Cu gridlines10.1109/JPHOTOV.2014.2360565 ↗
27. High efficiency silver-free heterojunction silicon solar cell10.1143/JJAP.51.10NA04 ↗
28. Damp heat induced degradation of silicon heterojunction solar cells with Cu-plated contacts
29. Tungsten doped indium oxide film: ready for bifacial copper metallization of silicon heterojunction solar cell10.1016/j.solmat.2015.09.033 ↗
30. Effect of tin-doped indium oxide film thickness on the diffusion barrier between silicon and copper10.1016/j.tsf.2006.04.042 ↗
31. Failure behavior of ITO diffusion barrier between electroplating Cu and Si substrate annealed in a low vacuum10.1016/j.apsusc.2009.04.001 ↗
32. Damp-heat-stable, high-efficiency, industrial-size silicon heterojunction solar cells10.1016/j.joule.2020.03.003 ↗