Planar MgxZn1-xO-based perovskite solar cell with superior ultraviolet light stability
Source abstract
Abstract
Abstract Generally, TiO2-based perovskite solar cell (PSC) is beneficial to high efficiency but poor ultraviolet (UV) light stability. Here, we report that a highly efficient MgxZn1-xO-based (MZO-based) PSC with excellent UV light stability. MZO has a higher electron mobility and deeper conduction band than traditional TiO2, which can reduce the charge accumulation at the MZO/perovskite interface and enhance the charge transfer from perovskite to MZO. Furthermore, the reduced interface loss and energy barrier are beneficial to obtain high open-circuit voltage (Voc). By optimizing, the MZO-based device shows a high Voc of 1.11 V, yielding a promising efficiency of 19.57%. The MZO-based device (unencapsulated) retains 76% of its initial short-circuit current density (Jsc) after 1 year air aging (room temperature, relative humidity: 40–80%) and 8 h UV irradiation (365 nm, 35 W), versus only 12% under the same condition for TiO2-based device. The good UV light stability of MZO-based device can be attributed to the reduced electron trap-state density in MZO electron-transporting layer (ETL). Specifically, zinc interstitial and oxygen vacancy mediated defect sites of MZO ETL are effectively passivated, which tightly protects the perovskite layer from degradation under UV light. Our results show a great potential for MZO ETL application in UV-stable PSC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
3. Liu · 2019 · 1900278
4. Additive engineering to grow micron-sized grains for stable high efficiency perovskite solar cells10.1002/advs.201901241 ↗
5. MgxZn1-xO/Ag/MgxZn1–xO multilayers as high-performance transparent conductive electrodes10.1021/acsami.5b09974 ↗
6. Enhanced photovoltage for inverted planar heterojunction perovskite solar cells10.1126/science.aap9282 ↗
7. A review of the role of solvents in formation of high-quality solution-processed perovskite films10.1021/acsami.8b16315 ↗
8. Bifunctional electron transporting layer/perovskite interface linker for highly efficient perovskite solar cells10.1016/j.electacta.2018.10.130 ↗
9. Solution processed Nb2O5 electrodes for high efficient ultraviolet light stable planar perovskite solar cells10.1021/acssuschemeng.9b00991 ↗
10. Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification10.1039/C5EE03522H ↗
11. Unveiling the synergistic effect of precursor stoichiometry and interfacial reactions for perovskite light-emitting diodes10.1038/s41467-019-10612-3 ↗
12. An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss10.1039/C9EE00751B ↗
13. Surface halogen compensation for robust performance enhancements of CsPbX3 perovskite quantum dots10.1002/adom.201900276 ↗
14. Efficient yttrium (III) chloride-treated TiO2 electron transfer layers for performance-improved and hysteresis-less perovskite solar cells10.1002/cssc.201701911 ↗
15. Mg-doped TiO2 boosts the efficiency of planar perovskite solar cells to exceed 19%10.1039/C6TA06879K ↗
16. CsPbBr3 quantum dots 2.0: benzenesulfonic acid equivalent ligand awakens complete purification10.1002/adma.201900767 ↗
17. Ultrathin Zn2SnO4 passivated ZnO nanocone arrays for efficient and stable perovskite solar cells10.1016/j.cej.2018.12.056 ↗
18. Low-temperature processed In2S3 electron transport layer for efficient hybrid perovskite solar cells10.1016/j.nanoen.2017.04.033 ↗
19. Low-temperature solution-processed ZnSe electron transport layer for efficient planar perovskite solar cells with negligible hysteresis and improved photostability10.1021/acsnano.8b01351 ↗
20. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
21. Room-temperature processed Nb2O5 as the electron-transporting layer for efficient planar perovskite solar cells10.1021/acsami.7b05113 ↗
22. MgZnO high voltage thin film transistors on glass for inverters in building integrated photovoltaics10.1038/srep34169 ↗
23. Improved performance in bulk heterojunction organic solar cells with a sol-gel MgZnO electron-collecting layer10.1002/aenm.201400073 ↗
24. Strain relaxation and light management in tin-lead perovskite solar cells to achieve high efficiencies10.1021/acsenergylett.9b01237 ↗
25. Schottky/p-n cascade heterojunction constructed by intentional n-type doping perovskite toward efficient electron layer-free perovskite solar cells10.1002/solr.201800274 ↗
26. Dissolution-recrystallization method for high efficiency perovskite solar cells10.1016/j.apsusc.2017.02.150 ↗
27. Interactions between molecules and perovskites in halide perovskite solar cells10.1016/j.solmat.2017.09.038 ↗
28. Highly efficient flexible quantum dot solar cells with improved electron extraction using MgZnO nanocrystals10.1021/acsnano.7b04332 ↗
29. Alotaibi · 2019 · 1900234
30. On the relation between the open-circuit voltage and quasi-fermi level splitting in efficient perovskite solar cells10.1002/aenm.201901631 ↗
31. An efficient TeO2/Ag transparent top electrode for 20%-efficiency bifacial perovskite solar cells with a bifaciality factor exceeding 80%10.1039/C9TA02389E ↗
32. Impact of monovalent cation halide additives on the structural and optoelectronic properties of CH3NH3PbI3 perovskite10.1002/aenm.201502472 ↗
33. Interfacial oxygen vacancies as a potential cause of hysteresis in perovskite solar cells10.1021/acs.chemmater.5b04019 ↗
34. Reduced efficiency roll-off and improved stability of mixed 2D/3D perovskite light emitting diodes by balancing charge injection10.1002/adfm.201904101 ↗
35. Room-temperature molten salt for facile fabrication of efficient and stable perovskite solar cells in ambient air10.1016/j.chempr.2019.02.025 ↗