Effects of grain boundaries on conversion efficiencies of single-crystal-like GaAs thin-film solar cells on flexible metal tapes
Source abstract
Abstract
Abstract We present a numerical simulation study of the effects of low-angle grain boundaries (GBs) in a single-crystal-like GaAs thin-film material on its photovoltaic performance. Here, 1D and 2D modeling are employed to simulate a solar-cell (SC) device based on the properties of single-crystal-like GaAs thin films grown on metal tape. Properties include minority carriers’ mobility, carrier lifetimes, and diffusion length. The 1D model, by incorporating a uniform biaxially textured GaAs compared to single crystal GaAs, predicts an efficiency ∼21% for average carrier lifetimes of 1 ns. This result is not consistent with an experimental results showing an efficiency of 4.3%. 1D simulation generally works well for the prediction of conventional crystalline SC I-V characteristics, but it fails for newly-developed single-crystal-like GaAs SC devices with different material properties and non-vertical device geometry. Hence, we develop a 2D model to study the effect of localized recombination centers in the material by defining different regions of defective low-angle grain boundaries and single crystalline intra-grains. The 2D model is comparable to the experimental results mainly due to its capability to consider localized material inhomogeneity and lateral carriers dynamic. The effect of grain boundary density on SC performance is studied by 2D modeling. Increasing the grain size of GaAs from 2 μm to 50 μm can improve efficiency from 4.8% to 12.3%. The open-circuit voltage (Voc) shows more sensitivity to varying grain boundary densities than other SC characteristic factors. The 2D model is also employed to study bulk passivation of GBs and suggests that an efficiency of ∼19.5% is achievable in the single-crystal-like GaAs SCs even with a small grain size of 2 μm, if effective grain boundary passivation is applied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · solar cell performance optimization · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Highly efficient single-junction GaAs thin-film solar cell on flexible substrate10.1038/srep30107 ↗
2. Band bending and passivation studies of GaAs grain boundaries10.1149/1.2129578 ↗
3. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
4. High-efficiency n-Type HP mc silicon solar cells10.1109/JPHOTOV.2017.2714139 ↗
5. Advances in cost-efficient thin-film photovoltaics based on Cu(In,Ga)Se2
6. Low substrate temperature CdTe solar cells: a review10.1016/j.solener.2018.02.038 ↗
7. High‐performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
8. High mobility single-crystalline-like GaAs thin films on inexpensive flexible metal substrates by metal-organic chemical vapor deposition10.1063/1.4895388 ↗
9. High opto-electronic quality n-type single-crystalline-like GaAs thin films on flexible metal substrates10.1039/C7TC02443F ↗
10. High-performance flexible thin-film transistors based on single-crystal-like germanium on glass10.1002/aelm.201600041 ↗
11. High-performance flexible thin-film transistors based on single-crystal-like silicon epitaxially grown on metal tape by roll-to-roll continuous deposition process10.1021/acsami.6b06770 ↗
12. Grain boundary effects in polycrystalline silicon solar cells10.1016/0379-6787(90)90040-C ↗
13. Efficiency considerations for polycrystalline GaAs thin-film solar cells10.1063/1.337665 ↗
14. The influence of grain boundaries on the performance efficiency of polycrystalline gallium arsenide solar cells10.1016/0038-1101(89)90058-0 ↗
15. A two-dimensional modeling of the fine-grained polycrystalline silicon thin-film solar cells10.1016/S0040-6090(01)01644-3 ↗
16. Effects of bulk and grain boundary recombination on the efficiency of columnar-grained crystalline silicon film solar cells
17. An Examination of 1D solar cell model limitations using 3D SPICE modeling
18. High‐efficiency flexible III‐V photovoltaic solar cells based on single‐crystal‐like thin films directly grown on metallic tapes10.1002/pip.3070 ↗
19. Impact of threading dislocations on both n/p and p/n single junction GaAs cells grown on Ge/SiGe/Si substrates10.1063/1.1736318 ↗
20. Band bending associated with grain boundary interface states in polycrystalline GaAs
21. Charged grain boundaries reduce the open-circuit voltage of polycrystalline solar cells–An analytical description10.1063/1.4972028 ↗
22. Efficiency calculations for thin-film polycrystalline semiconductor p-n junction solar cells10.1109/T-ED.1980.20153 ↗
23. Electrical properties of grain boundaries
24. Grain boundary effects in polycrystalline silicon solar cells10.1016/0379-6787(90)90040-C ↗
25. The effects of grain boundary and interface recombination on the performance of thin-film solar cells10.1016/0038-1101(78)90239-3 ↗
26. Understanding the current-voltage characteristics of industrial crystalline silicon solar cells by considering inhomogeneous current distributions10.2478/s11772-013-0095-5 ↗
27. A conduction model for semiconductor-grain-boundary-semiconductor barriers in polycrystalline-silicon films10.1109/T-ED.1983.21087 ↗
28. Passivation of grain boundaries in polycrystalline silicon10.1063/1.90779 ↗
29. Deuterium passivation of grain-boundary dangling bonds in silicon thin films10.1063/1.92934 ↗
30. Characterization of ion-implanted GaAs by ellipsometry10.1063/1.327921 ↗
31. Hydrogen passivation of multicrystalline silicon solar cells10.1016/S0921-5107(98)00288-8 ↗
32. Effect of hydrogen passivation on polycrystalline silicon thin films10.1016/j.tsf.2005.01.056 ↗