Synergistic effect of Na and Se on CZTSe solar cells through a soft chemical process
Source abstract
Abstract
Abstract Alkali metal can improve the chalcopyrite structured device performance. However, such alkali metal is normally doped by diffusing Na into absorber layer from soda-lime glass or by vacuum method. In this study, a soft chemical method is applied to dope Na into kesterite structured compound film. Combined by XRD, SEM, SIMS, and EDS mapping, it indicates that the NaF aqueous solution treatment provides a unique Na source, which can promote the film growth and the elements distribution, especially Se element distribution. The surface decomposition of CZTSe is suppressed because of the Na participating in crystallization at the beginning stage of the selenization process, which can improve the interface between CdS and CZTSe. The average conversion efficiency of solar cell is improved from 6.3% without such treatment to above 7.8% with such chemical treatment and the best 8.4% efficiency has been achieved for the 0.005 mol/L NaF treated CZTSe device. This facile Na aqueous solution treatment afford a unique insight and also enlarge the understanding on the Na treatment on compound semiconductor solar cells, which will promote the fabrication of chalcopyrite solar cell with high performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Cation substitution in earth-abundant kesterite photovoltaic materials10.1002/advs.201700744 ↗
2. The state and future prospects of kesterite photovoltaics10.1039/c3ee41781f ↗
3. Industrial perspectives on earth abundant, multinary thin film photovoltaics10.1088/1361-6641/aa5c18 ↗
4. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
5. Path towards high-efficient kesterite solar cells10.1016/j.jechem.2017.10.027 ↗
6. Device characteristics of CZTSSe thin film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
7. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
8. A review of thin film solar cell technologies and challenges10.1016/j.rser.2016.12.028 ↗
9. Adjustment of alkali element incorporations in Cu(In,Ga)Se2 thin films with wet chemistry Mo oxide as a hosting reservoir10.1016/j.solmat.2017.08.022 ↗
10. Al-Thani · 2008 · 1
11. A promising sputtering for in situ fabrication of CIGS thin films without post-selenization10.1016/j.jallcom.2014.05.002 ↗
12. Electrical properties of CIGS/Mo junctions as a function of MoSe2 orientation and Na doping10.1002/pip.2377 ↗
13. Cu(In,Ga)Se2 solar cells with varying Na content prepared on nominally alkali-free glass substrates10.1109/JPHOTOV.2013.2247655 ↗
14. Na induced efficiency boost for Se deficient Cu(In,Ga)Se2 solar cells10.1002/pip.2600 ↗
15. The impact of sodium on the sub-bandgap states in CZTSe and CZTS10.1063/1.4916635 ↗
16. The role of sodium as a surfactant and suppressor of non-radiative recombination at internal surfaces in Cu2ZnSnS410.1002/aenm.201400849 ↗
17. Insights into intrinsic defects and the incorporation of Na and K in the Cu2ZnSnSe4 thin-film solar cell material from hybrid-functional calculations10.1021/acs.jpcc.5b11022 ↗
18. Effects of potassium doping on solution processed kesterite Cu2ZnSnS4thin film solar cells10.1063/1.4903500 ↗
19. Cu2ZnSnS4 thin films generated from a single solution based precursor: the effect of Na and Sb doping10.1021/acs.chemmater.6b01499 ↗
20. Improvement of minority carrier lifetime and conversion efficiency by Na incorporation in Cu2ZnSnSe4 solar cells10.1063/1.4993288 ↗
21. Sodium passivation of the grain boundaries in CuInSe2 and Cu2ZnSnS4 for high efficiency solar cells10.1002/aenm.201601457 ↗
22. Impact of sodium on the secondary phases and current pathway in Cu2(Zn,Sn)Se4 thin film solar cell10.1016/j.matchemphys.2017.01.070 ↗
23. Revealing the role of potassium treatment in CZTSSe thin film solar cells10.1021/acs.chemmater.7b00418 ↗
24. Alkali-metal-enhanced grain growth in Cu2ZnSnS4 thin films10.1039/C3EE44130J ↗
25. Efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells via alkali metals doping10.1002/aenm.201502386 ↗
26. Na diffusion enhanced p-type conductivity in Cu(In,Ga)Se2: a new mechanism for efficient doping in semiconductors10.1002/aenm.201601191 ↗
27. Sodium assisted sintering of chalcogenides and its application to solution processed Cu2ZnSn(S,Se)4 thin film solar cells10.1021/cm403504u ↗
28. Lithium-doped Cu2ZnSnS4 superstrate solar cells with 5% efficiency: an alternative to thin film kesterite photovoltaics10.1016/j.nanoen.2018.08.049 ↗
29. An investigation of Na-related defects in Cu2ZnSnSe410.1039/C7CP02192E ↗
30. Intrinsic defects and Na doping in Cu2ZnSnS4: a density-functional theory study10.1016/j.solener.2015.04.005 ↗
31. Effect of different alkali (Li, Na, K, Rb, Cs) metals on Cu2ZnSnSe4 solar cells10.1016/j.tsf.2016.11.027 ↗
32. Controlled grain growth for high performance nanoparticle-based kesterite solar cells10.1021/acs.chemmater.6b02733 ↗
33. Alkali-metal-enhanced grain growth in Cu2ZnSnS4 thin films10.1039/C3EE44130J ↗
34. Efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells via alkali metals doping10.1002/aenm.201502386 ↗
35. Effect of NaF evaporation on morphological and structural properties of Cu2ZnSnSe4 (CZTSe) thin film deposited by sputtering from a single compound target10.1016/j.jallcom.2017.05.098 ↗
36. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
37. The alterations of carrier separation in kesterite solar cells10.1016/j.nanoen.2018.07.039 ↗
38. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S,Se)4 and increases photovoltaic efficiency10.1039/C5CP04707B ↗
39. Growth of Cu2ZnSnSe4 film under controllable Se vapor composition and impact of low Cu content on solar cell efficiency10.1021/acsami.6b00081 ↗
40. 10% Efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
41. Tailoring the defects and carrier density for beyond 10% efficient CZTSe thin film solar cells10.1016/j.solmat.2016.09.034 ↗
42. The Na-Se (Sodium-Selenium) system10.1007/BF02665704 ↗
43. Influence of sodium on the growth of polycrystalline Cu(In,Ga)Se2 thin films10.1016/S0040-6090(99)00777-4 ↗
44. The influence of sequence of precursor films on CZTSe thin films prepared by ion-beam sputtering deposition10.1088/1674-4926/38/2/023002 ↗
45. Sol-gel processed CZTS thin film solar cell on flexible molybdenum foil10.1016/j.tsf.2017.02.019 ↗
46. SHORT COMMUNICATION: ACCELERATED PUBLICATION: diode characteristics in state of the art ZnO/CdS/Cu(In1−xGax)Se2 solar cells10.1002/pip.626 ↗
47. Identifying parasitic current pathways in CIGS solar cells by modelling dark J–V response10.1002/pip.2582 ↗
48. Wurtzite CZTS nanocrystals and phase evolution to kesterite thin film for solar energy harvesting10.1039/C5CP02007G ↗
49. Thin film solar cells: device measurements and analysis10.1002/pip.518 ↗
50. A CZTSe solar cell with 8.2% power conversion efficiency fabricated using electrodeposited Cu/Sn/Zn precursor and a three-step selenization process at low Se pressure10.1016/j.solmat.2016.09.028 ↗
51. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
52. Earth abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
53. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
54. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
55. Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation10.1063/1.1646758 ↗
56. Reversibility of (Ag,Cu)(In,Ga)Se2 electrical properties with the addition and removal of Na: role of grain boundaries10.1063/1.4915334 ↗
57. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
58. Effects of Na incorporation on electrical properties of Cu(In,Ga)Se2-based photovoltaic devices on polyimide substrates10.1016/j.solmat.2014.05.009 ↗
59. Modeling the effects of Na incorporation on CIGS solar cells10.1109/JPHOTOV.2012.2221082 ↗
60. Stability and electronic structure of Cu2ZnSnS4 surfaces: first-principles study10.1103/PhysRevB.88.045427 ↗
61. Restraining the band fluctuation of CBD-Zn(O,S) layer: modifying the hetero-junction interface for high performance Cu2ZnSnSe4 solar cells with Cd-free buffer layer10.1002/solr.201700075 ↗
62. The influence of Na on metastable defect kinetics in CIGS materials10.1016/j.tsf.2008.10.140 ↗
63. Enhancing efficiency of Cu(In,Ga)Se2 solar cells on flexible stainless steel foils using NaF co-evaporation10.1016/j.solener.2013.03.010 ↗
64. Substrate temperature-assisted preparation of CZTSSe thin films by a single quinary target10.1007/s11664-017-5881-2 ↗
65. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
66. First-principles study on doping effects of sodium in kesterite Cu2ZnSnS410.1021/ic5013268 ↗
67. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗