Front and rear contact Si solar cells combining high and low thermal budget Si passivating contacts
Source abstract
Abstract
In this work we develop a rear emitter silicon solar cell integrating carrier-selective passivating contacts (CSPCs) with different thermal budget in the same device. The solar cell consists of a B-doped poly-Si/SiOx hole collector and an i/n hydrogenated amorphous silicon (a-Si:H) stack acting as electron collector placed on the planar rear and textured front side, respectively. We investigate the passivation properties of both CSPCs on symmetric structures by optimizing the interdependency among annealing temperature, time and environment. The optimized B-doped poly-Si/SiOx reaches a saturation current density of ~10 fA/cm2 on n-type wafers and an implied open circuit voltage (iVOC) of 716 mV. Furthermore, the i/n a-Si:H stack shows an effective carrier lifetime above 4 ms and iVOC of ~705 mV for cell-relevant layers thickness. After a post-deposition annealing in H2, lifetime is above 10 ms and iVOC = 708 mV. Finally, we optimize the optoelectronic properties of indium-based transparent conductive oxide (Indium Tin Oxide ITO and hydrogenated indium oxide IO:H) to reduce parasitic absorption with a gain in short circuit current density of 0.23 mA/cm2. In conclusion, the optimized layer stacks are implemented at device level obtaining a device with VOC = 704 mV, fill factor of 73.8%, a short circuit current of 39.7 mA/cm2 and 21.0% aperture-area conversion efficiency.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
2. The Passivated Emitter and Rear Cell (PERC): from conception to mass production
3. Comprehensive analytical model for locally contacted rear surface passivated solar cells10.1063/1.3506706 ↗
4. Physical model of back line-contact front-junction solar cells10.1063/1.4800840 ↗
5. Wurfel · 2008
6. High-efficiency silicon heterojunction solar cells: a review10.1515/green-2011-0018 ↗
7. 24.7% record efficiency HIT solar cell on thin silicon wafer
8. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
9. High-efficiency heterojunction crystalline Si solar cells10.7567/JJAP.57.08RB20 ↗
10. Wet-chemical treatment for improved surface passivation of textured silicon heterojunction solar cells10.1016/j.egypro.2014.08.117 ↗
11. S. Bowden, U. Das, S. Herasimenka, R. Birkmire, Stability of amorphous/crystalline silicon heterojunctions, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, San Diego, CA, USA, 2008, pp. 1–4. 〈doi:10.1109/PVSC.2008.4922850〉.10.1109/PVSC.2008.4922850 ↗
12. D. Zhang, R.A. C. M. M. van Swaaij, M. Zeman, Influence of Intrinsic Layer Thickness in the Emitter and BSF of HIT Solar Cells, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012. 〈http://dx.doi.org/10.4229/27thEUPVSEC2012-2BV.6.3〉.
13. Nature of doped a-Si: h/c-sia-si: h/c-si interface recombination10.1063/1.3129578 ↗
14. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
15. Reduction of optical loss in hydrogenated amorphous silicon/crystalline silicon heterojunction solar cells by high-mobility hydrogen-doped In2O3 transparent conductive oxide10.1143/APEX.1.041501 ↗
16. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗
17. A 720 mV open circuit voltage SiOx:c‐Si:SiOx double heterostructure solar cell10.1063/1.96331 ↗
18. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
19. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells10.1016/j.egypro.2017.09.250 ↗
20. Ion implantation into amorphous Si layers to form carrier-selective contacts for Si solar cells10.1002/pssr.201409312 ↗
21. J. Melskens, B. van de Loo, B. Macco, M. Vos, J. Palmans, S. Smit, W. Kessels, Concepts and prospects of passivating contacts for crystalline silicon solar cells, in: Proceedings of the IEE 42nd Photovoltaic Specialist Conference, New Orleans, 2015.10.1109/PVSC.2015.7355646 ↗
22. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
23. A study on the charge carrier transport of passivating contacts
24. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
25. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
26. Peibst · 2016
27. n‐Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation
28. IBC c-Si solar cells based on ion-implanted poly-silicon passivating contacts10.1016/j.solmat.2016.05.041 ↗
29. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
30. 〈https://isfh.de/en/26-1-record-efficiency-for-p-type-crystalline-si-solar-cells/〉 (Accessed 21 of August 2018).
31. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
32. Silicon solar cell architecture with front selective and rear full area ion-implanted passivating contacts10.1002/solr.201700040 ↗
33. Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films10.1016/j.solmat.2017.06.039 ↗
34. Efficient carrier selective p- and n- contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
35. Crystalline silicon solar cell with front and rear polysilicon passivated contacts as bottom cell for hybrid tandems10.1016/j.egypro.2017.09.091 ↗
36. Bivour · Sol. Energy Mater. Sol. Cell. · 2014 · 15
37. L. Tutsch, M. Bivour, W. Wolke, M. Hermle, J. Rentsch, Influence of the transparent electrode sputtering process on the interface passivation quality of silicon heterojunction solar cells, in: Proceedings of the 33rd European PV Solar Energy Conference and Exhibition, 24–29 September 2017, Amsterdam, The Netherlands.
38. Improving the performance of amorphous and crystalline silicon heterojunction solar cells by monitoring surface passivation10.1016/j.jnoncrysol.2011.12.063 ↗
39. Design and application of ion-implanted polySi passivating contacts for interdigitated back contact c-Si solar cells
40. R. Sinton, A. Cuevas, M. Stuckings, "Quasi-steady-state photoconductance, a new method for solar cell material and device characterization, in: Proceedings of the Conference Record of the IEEE Photovoltaic Specialists Conference, 1996.10.1109/PVSC.1996.564042 ↗
41. S. Olibet, C. Monachon, A. Hessler-Wyser, E. Vallat-Sauvain, S. De Wolf, L. Fesquet, J. Damon-Lacoste, C. Ballif, Textured silicon heterojunction solar cells with over 700 mv open-circuit voltage studied by transmission electron microscopy, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, 1–5 September 2008, Valencia, Spain.
42. A. Lachowicz, J. Geissbühler, A. Faes, J. Champliaud, J. Hermans, J.F. Lerat, P.J. Ribeyron, C. Roux, G. Wahli, P. Papet, B. Strahm, J. Horzel, C. Ballif, M. Despeisse, Reliable copper plating process for bifacial heterojunction cells, in: Proceedings of the 7th Workshop on Metallization & Interconnection for Crystalline Silicon Solar Cells, 23. October, Konstanz, 2017.
43. Role of a-Si:H bulk in surface passivation of c-Si wafers10.1002/pssr.201004139 ↗
44. Hydrogen plasma treatments for passivation of amorphous-crystalline silicon-heterojunctions on surfaces promoting epitaxy10.1063/1.4798292 ↗
45. Effect of texturing and surface preparation on lifetime and cell performance in heterojunction silicon solar cells10.1016/j.solmat.2008.05.011 ↗
46. S. Bowden, U. Das, S. Herasimenka, R. Birkmire, Stability of amorphous/crystalline silicon heterojunctions, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, San Diego, CA, USA, 2008, pp. 1–4. 〈doi:10.1109/PVSC.2008.4922850〉.10.1109/PVSC.2008.4922850 ↗
47. Temporal stability of a-Si:H and a-SiNx:H on crystalline silicon wafers10.1016/j.egypro.2017.09.299 ↗
48. Staebler–Wronski-like formation of defects at the amorphous-silicon–crystalline silicon interface during illumination
49. Improved amorphous/crystalline silicon interface passivation for heterojunction solar cells by low-temperature chemical vapor deposition and post-annealing treatment10.1039/C4CP02212B ↗
50. Properties of interfaces in amorphous/crystalline silicon heterojunctions10.1002/pssa.200982845 ↗
51. Damage at hydrogenated amorphous/crystalline silicon interfaces by indium in oxide overlayer sputtering10.1063/1.4764529 ↗
52. Hydrogen passivation of poly-Si/SiOx contacts for Si solar cells using Al2O3 studied with deuterium10.1063/1.5031118 ↗
53. Hydrogen-doped In2O3 as high-mobility transparent conductive oxide10.1143/JJAP.46.L685 ↗
54. Bierwagen · Semicond. Sci. Technol. · 2015 · 30 · 02400110.1088/0268-1242/30/2/024001 ↗
55. Band gap narrowing and the band structure of tin-doped indium oxide films10.1016/0040-6090(89)90361-1 ↗
56. 〈https://www.pveducation.org/pvcdrom/appendices/standard-solar-spectra〉 (Accessed 21 September 2018).
57. Carrier transport in polycrystalline transparent conductive oxides: a comparative study of zinc oxide and indium oxide10.1016/j.tsf.2007.05.084 ↗
58. Towards the implementation of atomic layer deposited In2O3:H in silicon heterojunction solar cells10.1016/j.solmat.2017.01.011 ↗
59. Tin doped indium oxide thin films: electrical properties10.1063/1.367025 ↗
60. Nunes de Carvalho · Surf. Coat. Technol. · 2002 · 151–152 · 25210.1016/S0257-8972(01)01641-3 ↗
61. Ir. Ariyanto Wibowo Setia Budhi, Hydrogenated Indium Oxide (IO:H) for Thin Film Solar Cell, 〈https://repository.tudelft.nl/islandora/object/uuid:78eed80f-2d9e-4c9a-b806-40b8adb9ccda/datastream/OBJ/download〉.
62. Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells10.1016/j.solmat.2018.06.021 ↗
63. Transparent conducting oxides for Photovoltaics: manipulation of Fermi Level, work function and energy band alignment10.3390/ma3114892 ↗
64. The origin of background plating10.1016/j.egypro.2011.06.183 ↗
65. Glatthaar, Optimizing adhesion of laser structured plated Ni-Cu contacts with insights from micro characterization10.1016/j.egypro.2016.07.101 ↗