Enhanced performance and stability of inverted planar perovskite solar cells by incorporating 1,6-diaminohexane dihydrochloride additive
Source abstract
Abstract
Abstract Herein, 1,6-Diaminohexane Dihydrochloride (1,6-DD) is introduced into perovskite precursors to fabricate the inverted planar perovskite solar cells. By regulating the concentration of 1,6-DD additive, the average power conversion efficiency (PCE) of perovskite solar cells is enhanced by 20%. The champion device achieves a relatively high PCE of 17% and an excellent fill factor of 80.1%. The PCE of the large-area (1 cm2) device also reaches to 13.68%. After exposure to the air for 16 days, the device with 1,6-DD additive still retains above 90% of the initial efficiency, exhibiting good stability. We demonstrate that a small amount of 1,6-DD affects the crystallization dynamic, yielding ideal perovskite film with enhanced crystallinity and enlarged grain size. The two terminal -NH3+ groups passivates the vacancy defects at the perovskite crystal surface, suppressing charge recombination and facilitating charge transportation effectively. Meanwhile, adjacent crystal surfaces are linked through the hexane alkyl chain of 1,6-DD molecule, which enhances the interaction between perovskite grains and anchors the microstructure of perovskite to some degree. Hydrophobic hexane alkyl chains also increase the moisture resistance of perovskite film. Thus, an easy and effective way is provided for fabricating efficient and stable perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Electron-hole diffusion lengths exceeding 1 μm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
2. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
3. Upscaling of perovskite solar cells: fully ambient roll processing of flexible perovskite solar cells with printed back electrodes10.1002/aenm.201500569 ↗
4. Molecular engineering of the organometallic perovskites/HTMs in the PSCs: photovoltaic behavior and energy conversion10.1016/j.solmat.2018.02.021 ↗
5. Organic and perovskite solar cells for space applications10.1016/j.solmat.2018.03.024 ↗
6. Applications of phosphorene and black phosphorus in energy conversion and storage devices10.1002/aenm.201702093 ↗
7. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
8. Pinhole-free mixed perovskite film for bending durable mixed perovskite solar cells10.1016/j.solmat.2017.10.031 ↗
9. NREL, Best Research-Cell Efficiencies, 〈https://www.nrel.gov/pv/assets/images/efficiencychart〉 (October 2017.
10. Improved electronic transport properties of tin-halide perovskites10.1016/j.solmat.2017.05.045 ↗
11. Flexible perovskite solar cells with ultrathin Au anode and vapour-deposited perovskite film10.1016/j.solmat.2017.04.039 ↗
12. Preparation and characteristics of MoSe2 interlayer in bifacial Cu(In,Ga)Se2 solar cells10.1016/j.phpro.2012.03.571 ↗
13. Effect of substrate temperature on the structural and electrical properties of CIGS films based on the one-stage co-evaporation process10.1088/0268-1242/25/5/055007 ↗
14. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
15. Halide-dependent electronic structure of organolead perovskite materials10.1021/acs.chemmater.5b01909 ↗
16. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
17. Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides10.1038/nchem.2324 ↗
18. Classical modelling of grain size and boundary effects in polycrystalline perovskite solar cells10.1016/j.solmat.2018.02.026 ↗
19. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
20. The stable perovskite solar cell prepared by rapidly annealing perovskite film with water additive in ambient air10.1016/j.solmat.2017.12.015 ↗
21. The influence of DMSO and ether via fast-dipping treatment for a perovskite solar cell10.1016/j.solmat.2017.10.024 ↗
22. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells10.1126/science.aaf8060 ↗
23. Research update: physical and electrical characteristics of lead halide perovskites for solar cell applications10.1063/1.4871795 ↗
24. Comparison of life cycle environmental impacts of different perovskite solar cell systems10.1016/j.solmat.2017.03.008 ↗
25. Make perovskite solar cells stable10.1038/544155a ↗
26. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
27. TiO2/RbPbI3 halide perovskite solar cells10.1016/j.solmat.2017.07.011 ↗
28. Intrinsic halide segregation at nanometer scale determines the high efficiency of mixed cation/mixed halide perovskite solar cells10.1021/jacs.6b10049 ↗
29. Pseudohalide-induced moisture tolerance in perovskite CH3NH3Pb(SCN)2I thin films10.1002/ange.201503038 ↗
30. Post-treatment of perovskite film with phenylalkylammonium iodide for hysteresis-less perovskite solar cells10.1016/j.solmat.2018.02.015 ↗
31. High-efficiency two-dimensional ruddlesden-popper perovskite solar cells10.1038/nature18306 ↗
32. Mixed perovskite based on methyl-ammonium and polymeric-ammonium for stable and reproducible solar cells10.1039/C5CC05879A ↗
33. Interactions between molecules and perovskites in halide perovskite solar cells10.1016/j.solmat.2017.09.038 ↗
34. BCP as additive for solution-processed PCBM electron transport layer in efficient planar heterojunction perovskite solar cells10.1109/JPHOTOV.2017.2651108 ↗
35. Controllable crystal film growth via appropriate substrate-preheating treatment for perovskite solar cells using mixed lead sources10.1109/JPHOTOV.2017.2775162 ↗
36. Efficient and stable perovskite solar cells based on high-quality CH3NH3PbI3-xClx films modified by V2Ox additives10.1039/C7TA06752F ↗
37. Nucleation and crystallization control via polyurethane to enhance the bendability of perovskite solar cells with excellent device performance10.1002/adfm.201703061 ↗
38. Hydrazinium salt as additive to improve film morphology and carrier lifetime for high-efficiency planar-heterojunction perovskite solar cells via one-step method10.1021/acsami.7b11168 ↗
39. High-performance inverted planar heterojunction perovskite solar cells based on lead acetate precursor with efficiency exceeding 18%10.1002/adfm.201601175 ↗
40. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
41. Optimized organometal halide perovskite solar cell fabrication through control of nanoparticle crystal patterning10.1039/C6TC05189H ↗
42. Efficient TCO-free organic solar cells with modified poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) anodes10.1166/jnn.2011.3173 ↗
43. An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive10.1039/C4NR02425G ↗
44. Additive to regulate the perovskite crystal film growth in planar heterojunction solar cells10.1063/1.4906073 ↗
45. One-step, low-temperature deposited perovskite solar cell utilizing small molecule additive10.1117/1.JPE.5.057405 ↗
46. Enhanced photovoltaic performance of perovskite solar cells using polymer P(VDF-TrFE) as a processed additive10.1021/acs.jpcc.6b05255 ↗
47. Chlorine incorporation for enhanced performance of planar perovskite solar cell based on lead acetate precursor10.1021/acsami.5b06819 ↗
48. Role of chloride in the morphological evolution of organo-lead halide perovskite thin films10.1021/nn5041922 ↗
49. Investigation regarding the role of chloride in organic-inorganic halide perovskites obtained from chloride containing precursors10.1021/nl503279x ↗
50. Growth and evolution of solution-processed CH3NH3PbI3-xClx layer for highly efficient planar-heterojunction perovskite solar cells10.1016/j.jpowsour.2015.10.023 ↗
51. Low-rate dynamic contact angles on poly(methyl methacrylate) and the determination of solid surface tensions10.1006/jcis.1998.5610 ↗