journal article·2017-11

Characteristics of oil impregnated hydrophobic glass surfaces in relation to self-cleaning of environmental dust particles

Aditia Rifai, Numan Abu-Dheir, Mazen Khaled, Nasser Al-Aqeeli, Bekir Sami Yilbas

Publisher page

Abstract

Abstract Maintaining the high performance of photovoltaic devices requires regular cleaning of panel surfaces because of the environmental dust settlements in harsh weather conditions. Self-cleaning characteristics of such surfaces are vital for the cost effective operations. In the present study, a new fabrication approach is introduced towards self-cleaning applications of optically transparent glasses. In the fabrication process, self-assembly monolayer of silane was coated on the silica nanoparticle layer, prior to oil impregnation, to improve oil hydrodynamic stability of the oil film on the surface. The static water contact angle, sliding angle and average optical transmittance of the resulting surfaces are measured. The scanning electron microscope and atomic force microscope are used to reveal the hierarchical morphology of the surface. Dust cleaning tests are performed to evaluate the self-cleaning characteristics of the surfaces. The findings revealed that the water droplets can be effectively used to remove almost all of the dust particles from the surfaces. Oil impregnation improved the optical transmittance of the treated hydrophobic glass surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Icing and De-icing Technologies · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Experimental investigation of the anti-dust effect of transparent hydrophobic coatings applied for solar cell covering glass10.1016/j.solmat.2016.10.043 ↗
2. Peer anti-soiling surfaces for PV applications prepared by sol-gel processing: comparison of laboratory testing and outdoor exposure10.1016/j.solmat.2016.07.004 ↗
3. Sand erosion on solar reflectors: accelerated simulation and comparison with field data10.1016/j.solmat.2015.10.036 ↗
4. Superhydrophobic surfaces with antireflection properties for solar applications: a critical review10.1016/j.solmat.2016.07.038 ↗
5. Self-cleaning coatings10.1039/b412803f ↗
6. A review on self-cleaning coatings10.1039/c1jm12523k ↗
7. Superhydrophilic and superwetting surfaces: definition and mechanisms of control10.1021/la1039893 ↗
8. Superhydrophobic surfaces10.1016/j.cocis.2006.06.002 ↗
9. Self-cleaning efficiency of artificial superhydrophobic surfaces10.1021/la803860d ↗
10. Diverse access to artificial superhydrophobic surfaces using block copolymers10.1021/la051042+ ↗
11. Dual-scale roughness produces unusually water-repellent surfaces10.1002/adma.200400315 ↗
12. Superhydrophobic/superhydrophilic micropatterning on a carbon nanotube film using a laser plasma-type hyperthermal atom beam facility10.1016/j.carbon.2010.07.056 ↗
13. Superhydrophobic silica films by sol-gel co-precursor method10.1016/j.apsusc.2009.07.113 ↗
14. Self-cleaning silica coatings on glass by single step sol–gel route10.1016/j.surfcoat.2011.05.055 ↗
15. Superhydrophobic fabrics produced by electrospinning and chemical vapor deposition10.1021/ma0511189 ↗
16. From petal effect to lotus effect: a facile solution immersion process for the fabrication of super-hydrophobic surfaces with controlled adhesion10.1039/c3nr34256e ↗
17. Laser texturing of plasma electrolytically oxidized aluminum 6061 surfaces for improved hydrophobicity10.1115/1.4027977 ↗
18. Laser textured surface gradients10.1016/j.apsusc.2016.03.054 ↗
19. Laser texturing of Hastelloy C276 alloy surface for improved hydrophobicity and friction coefficient10.1016/j.optlaseng.2015.10.015 ↗
20. To increase the hydrophobicity, non-stickiness and wear resistance of DLC surface by surface texturing using a laser ablation process10.1016/j.triboint.2014.04.026 ↗
21. Laser texturing of zirconia surface with presence of TiC and B4C: surface hydrophobicity, metallurgical, and mechanical characteristics10.1016/j.ceramint.2014.07.047 ↗
22. Laser texturing of alumina surface for improved hydrophobicity10.1016/j.apsusc.2013.09.040 ↗
23. Tunable hydrophobicity on fractal and micro-nanoscale hierarchical fracture surface of metallic glasses10.1016/j.matdes.2016.01.145 ↗
24. Study on hierarchical structured PDMS for surface super-hydrophobicity using imprinting with ultrafast laser structured models10.1016/j.apsusc.2015.12.190 ↗
25. Influence of substrate surface roughness on light scattering of TiO2 optical thin films10.3788/col201311.s10303 ↗
26. Surface roughness and light transmission of biaxially oriented polypropylene films10.1002/pen.20850 ↗
27. Effect of surface roughness variation on the transmission characteristics of D-shaped fibers with ambient index change10.3938/jkps.56.1355 ↗
28. Mesoporous silica nanoparticle nanocarriers: biofunctionality and biocompatibility10.1021/ar3000986 ↗
29. Simple method for preparing superhydrophobic paper: spray-deposited hydrophobic silica nanoparticle coatings exhibit high water-repellency and transparency10.1021/la204492q ↗
30. Transparent superhydrophobic films based on silica nanoparticles10.1021/la070159q ↗
31. Hierarchically structured superhydrophilic coatings fabricated by self-assembling raspberry-like silica nanospheres10.1016/j.jcis.2007.05.011 ↗
32. Fabrication of mechanically robust superhydrophobic surfaces based on silica micro-nanoparticles and polydimethylsiloxane10.1016/j.surfcoat.2011.04.073 ↗
33. Double-layered TiO2-SiO2 nanostructured films with self-cleaning and antireflective properties10.1021/jp064442u ↗
34. Enhanced condensation on lubricant-impregnated nanotextured surfaces10.1021/nn303867y ↗
35. Slippery pre-suffused surfaces10.1209/0295-5075/96/56001 ↗
36. Mechanism of frost formation on lubricant-impregnated surfaces10.1021/la400801s ↗
37. Droplet mobility on lubricant-impregnated surfaces10.1039/C2SM27032C ↗
38. Lubricant-impregnated surfaces for drag reduction in viscous laminar flow
39. Ice adhesion on lubricant-impregnated textured surfaces10.1021/la402456c ↗
40. Selective co-deposition of anionic silica particles at hydrophobic surfaces from formulations of oppositely charged polymers and surfactants10.1016/j.jcis.2016.01.015 ↗
41. Surface modification to produce hydrophobic nano-silica particles using sodium dodecyl sulfate as a modifier10.1016/j.apsusc.2015.12.116 ↗
42. Tuning the hydrophobicity of plasma polymer coated silica particles10.1016/j.powtec.2013.09.018 ↗
43. Effect of thermal treatment on hydrophobicity of methyl-functionalised hybrid nano-silica particles10.1016/j.matlet.2012.09.018 ↗
44. Hydrophobic hole-transporting layer induced porous PbI2 film for stable and efficient perovskite solar cells in 50% humidity10.1016/j.solmat.2016.08.024 ↗
45. Superhydrophobic Al-doped ZnO nanorods-based electrically conductive and self-cleanable antireflecting window layer for thin film solar cell10.1016/j.solmat.2016.01.041 ↗
46. Self-cleaning glazing products: a state-of-the-art review and future research pathways10.1016/j.solmat.2012.09.034 ↗
47. Multi-functional SiO2 moth-eye pattern for photovoltaic applications10.1016/j.solmat.2014.03.002 ↗
48. Mechanically robust polyvinylidene fluoride (PVDF) based superhydrophobic coatings for self-cleaning applications
49. Examination of poly (butadiene epoxide) -coatings on inorganic surfaces10.1016/S0927-7757(98)00910-8 ↗
50. Tribology of PFPE overcoated self-assembled monolayers deposited on Si surface10.1088/0022-3727/38/18/029 ↗
51. Interface modification of ITO thin films: organic photovoltaic cells10.1016/j.tsf.2003.08.067 ↗
52. The improvement of adhesive properties of PEEK through different pre-treatments10.1016/j.apsusc.2012.04.040 ↗
53. Study of hydrophilicity and stability of chemically modified PDMS surface using piranha and KOH solution10.1002/sia.3770 ↗
54. fundamentals of sol-gel dip coating10.1016/0040-6090(91)90158-T ↗
55. Influence of sol and surface properties on in vitro bioactivity of sol-gel-derived TiO2 and TiO2-SiO2 films deposited by dip-coating method10.1002/(SICI)1097-4636(199811)42:2<295::AID-JBM15>3.0.CO;2-I ↗
56. Spontaneous pattern formation by dip coating of colloidal suspensions on homogeneous surfaces10.1021/la062150e ↗
57. Self-assembly of fine particles on patterned wettability in dip coating and its scale extension with contact printing10.1299/jamdsm.2.783 ↗
58. Thermally stable and transparent superhydrophobic sol–gel coatings by spray method10.1007/s10971-012-2798-3 ↗
59. Wetting transition of water droplets on superhydrophobic patterned surfaces10.1016/j.scriptamat.2007.09.004 ↗
60. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
61. Nonwetting of impinging droplets on textured surfaces10.1063/1.3110054 ↗
62. Droplet mobility on lubricant-impregnated surfaces10.1039/C2SM27032C ↗
63. Mechanics of dust removal from rotating disk in relation to self-cleaning applications of PV protective cover10.1016/j.solener.2016.02.028 ↗
64. Influence of dust and mud on the optical, chemical, and mechanical properties of a PV protective glass10.1038/srep15833 ↗