journal article·2017-09

Flexible space solar cell array with radiation shield fabricated by guided-printing of cover glasses

Pyo Kwak, Namyun Kim, Juho Kim, Dahye Kim, Kwangsun Song, Jongho Lee

Publisher page

Abstract

Abstract As the main electrical power source of spacecraft, solar cells require high electrical performance and light weight, to provide enough electrical power for missions in space and to lower costs for launching. Multi-junction compound semiconductor solar cells generate relatively high power, but their rigid substrates are tens or hundreds of times thicker than the solar cells. In this paper, methods are described to realize flexible space solar cell arrays that can be wrapped on non-planar surfaces, by removing the rigid substrates and integrating the thin solar cells on flexible substrates. Cover glasses were integrated over the solar cells on flexible substrates through an guided-printing method, providing both flexibility and radiation shielding. Experimental results and mechanical analysis demonstrate the mechanical and electrical performances of these flexible space solar cell arrays.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Nanowire Synthesis and Applications · Energy Harvesting in Wireless Networks

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Radiation-resistant solar cells for space use10.1016/S0927-0248(00)00344-5 ↗
2. Space solar cells — tradeoff analysis10.1016/S0927-0248(02)00320-3 ↗
3. Proton radiation analysis of multi-junction space solar cells10.1016/S0168-583X(03)00791-2 ↗
4. M. Imaizumi, T. Ohshima, T. Takamoto, Radiation resistance of InGaP / GaAs dual-junction thin-film space solar cell, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, Philadelphia, USA, pp. 1899–1902, 2009.10.1109/PVSC.2009.5411120 ↗
5. Radiation damage effects on double-junction GaInP2/GaAs solar cells10.1016/j.nimb.2014.03.022 ↗
6. High rate epitaxial lift-off of InGaP films from GaAs substrates10.1063/1.126276 ↗
7. Epitaxial lift-Off for large area thin film III/V devices10.1002/pssa.200460410 ↗
8. 26.1% thin-film GaAs solar cell using epitaxial lift-off10.1016/j.solmat.2009.03.027 ↗
9. Ultrathin film, high specific power InP solar cells on flexible plastic substrates10.1063/1.3268805 ↗
10. Improvement in separation rate of epitaxial lift-off by hydrophilic solvent for GaAs solar cell applications10.1016/j.solmat.2013.12.013 ↗
11. Semiconductor wires and ribbons for high-performance flexible electronics10.1002/anie.200703238 ↗
12. GaAs photovoltaics and optoelectronics using releasable multilayer epitaxial assemblies10.1038/nature09054 ↗
13. A repeatable epitaxial lift-off process from a single GaAs substrate for low-cost and high-efficiency III-V solar cells10.1002/aenm.201400589 ↗
14. Carbon-doped GaAs single junction solar microcells grown in multilayer epitaxial assemblies10.1063/1.4812399 ↗
15. Epitaxial lift-off GaAs solar cell from a reusable GaAs substrate10.1016/S0921-5107(96)02029-6 ↗
16. Reuse of GaAs substrates for epitaxial lift-off by employing protection layers10.1063/1.3684555 ↗
17. J. Adams, V. Elarde, A. Hains, C. Stender, F. Tuminello, C. Youtsey, A. Wibowo, M. Osowski, Demonstration of Multiple Substrate Reuses for Inverted Metamorphic Solar Cells, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference, Austin, USA, pp. 1–6, 2012.10.1109/PVSC-Vol2.2012.6656720 ↗
18. Epitaxial lift-off process for gallium arsenide substrate reuse and flexible electronics10.1038/ncomms2583 ↗
19. Stretchable GaAs photovoltaics with designs that enable high areal coverage10.1002/adma.201003961 ↗
20. Ultralight high-efficiency flexible InGaP/(In)GaAs tandem solar cells on plastic10.1002/aenm.201200827 ↗
21. Non-destructive wafer recycling for low-cost thin-film flexible optoelectronics10.1002/adfm.201400453 ↗
23. InGaP/GaAs-based multijunction solar cells10.1002/pip.642 ↗
24. Activity and current status of R&D on space solar cells in Japan10.1002/pip.644 ↗
25. Thin-film GaAs epitaxial lift-off solar cells for space applications10.1002/pip.616 ↗
26. K. Edmondson, D.C. Law, G. Glenn, A. Paredes, R.R. King, N.H. Karam, Flexible III-V Multijunction Solar Blanket, in: Proceedings of the 4th IEEE World Conference on Photovoltaic Energy Conference, Waikoloa, USA, pp. 1935–1938, 2006.10.1109/WCPEC.2006.279876 ↗
27. Achievement of IKAROS — Japanese deep space solar sail demonstration mission10.1016/j.actaastro.2012.03.032 ↗
28. Combined space environmental exposure test of multijunction GaAs / Ge solar array coupons10.1109/TPS.2011.2174161 ↗
29. Low-thrust geostationary transfer orbit (LT2GEO) radiation environment and associated solar array degradation modeling and ground testing10.1109/TNS.2014.2364894 ↗
30. Space environmental testing of flexible coverglass alternatives based on siloxanes10.1016/j.polymdegradstab.2013.09.008 ↗
31. Flexible shielding layers for solar cells in space applications10.1002/app.43661 ↗
32. Stretchable semiconductor technologies with high areal coverages and strain-limiting behavior: demonstration in high-efficiency dual-junction GaInP/GaAs photovoltaics10.1002/smll.201102437 ↗
33. Transfer printing by kinetic control of adhesion to an elastomeric stamp10.1038/nmat1532 ↗
34. Sawyer · 1976
35. Vette · 1991
36. Interplanetary proton fluence model: JPL 199110.1029/92JA02670 ↗
37. 5–20MeV proton irradiation effects on GaAs/Ge solar cells for space use10.1016/S0927-0248(02)00354-9 ↗
38. Degradation modeling of InGaP/GaAs/Ge triple-junction solar cells irradiated with various-energy protons10.1016/j.solmat.2008.09.044 ↗