journal article·2013-11

Transparent electrode for organic solar cells using multilayer structures with nanoporous silver film

Wei-Feng Xu, Chun-Chieh Chin, Ding-Wei Hung, Pei-Kuen Wei

Publisher page

Abstract

Abstract A transparent electrode consists of nanoporous silver thin film and molybdenum oxide was developed for transparent anode with advantages of low cost, large-area processing and room-temperature fabrication. High density nanoporous silver film was fabricated by controlling thickness and deposition rate during thermal evaporation. With silver thickness of 10 nm and 5 A/s deposition rate, the MoO x /nanoporous Ag/MoO x multilayer structure achieved ~9 Ω/sq sheet resistance and ~70% transparency. Compared to the indium—tin-oxide (ITO) anode, the nanoporous anode/SubPc/C 60 /BCP/Al photovoltaic device has an enhanced surface-plasmon absorption and a higher fill factor. Although its transparency is lower than ITO, the nanoporous anode achieved 3.45% power conversion efficiency, comparable to ITO-based devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanoporous metals and alloys · Anodic Oxide Films and Nanostructures · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Very-high-efficiency double-heterostructure copper phthalocyanine/C60 photovoltaic cells10.1063/1.1384001 ↗
2. Simple roll coater with variable coating and temperature control for printed polymer solar cells10.1016/j.solmat.2011.08.027 ↗
3. Quality control of roll-to-roll processed polymer solar modules by complementary imaging methods10.1016/j.solmat.2011.10.005 ↗
4. Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates10.1063/1.126052 ↗
5. Flexible organic light-emitting diodes with a polymeric nanocomposite anode10.1088/0957-4484/19/14/145201 ↗
6. Cu-based multilayer transparent electrodes: A low-cost alternative to ITO electrodes in organic solar cells10.1016/j.solmat.2012.01.016 ↗
7. Effect of Ag interlayer on the optical and passivation properties of flexible and transparent Al2O3/Ag/Al2O3 multilayer10.1063/1.2955841 ↗
8. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
9. The design of ZnS/Ag/ZnS transparent conductive multilayer films10.1016/S0040-6090(03)00141-X ↗
10. Plasmon-active nano-aperture window electrodes for organic photovoltaics10.1002/aenm.201200502 ↗
11. Surface-plasmon enhanced transparent electrodes in organic photovoltaics10.1063/1.2938089 ↗
12. Inverted organic photovoltaic cells with high open-circuit voltage10.1016/j.orgel.2009.12.024 ↗
13. On the role of bathocuproine in organic photovoltaic cells10.1002/adfm.200800815 ↗
14. Direct evidence for surface plasmon-mediated enhanced light transmission through metallic nanohole arrays10.1021/nl061670r ↗
15. MoO3 surface passivation of the transparent anode in organic solar cells using ultrathin films10.1063/1.3077160 ↗
16. Multilayer graphene films as transparent electrodes for organic photovoltaic devices10.1016/j.solmat.2011.09.031 ↗
17. WSXM: A software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
18. The structure of evaporated metal films and their optical properties10.1364/JOSA.40.000203 ↗
19. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
20. BCP/Ag/MoO3 transparent cathodes for organic photovoltaics10.1002/aenm.201100411 ↗
21. Palik · 1985 · 350