Concentration gradient P3OT/PCBM photovoltaic devices fabricated by thermal interdiffusion of separately spin-cast organic layers
Source abstract
Abstract
Abstract A series of organic photovoltaic devices consisting of concentration gradients of poly (3-octylthiophene) (P3OT) and [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) were fabricated by thermally-induced interdiffusion of consecutively spin-cast layers of P3OT and PCBM from solvents of chloroform and pyridine, respectively. The device performance was evaluated as a function of the layer thicknesses, interdiffusion temperature, and interdiffusion time. A maximum power conversion efficiency of 1.0% under AM1.5G simulated solar spectrum was obtained for 70 nm P3OT thickness, 45 nm PCBM thickness, and interdiffusion at 150 °C for 20 min. Auger spectroscopy depth profiling measurements indicated that the optimal devices consist of concentration gradients of P3OT and PCBM extending across the entire film in opposite directions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
3. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
4. Flexible, conjugated polymer–fullerene-based bulk heterojunction solar cells: basics, encapsulation, and integration10.1557/jmr.2005.0399 ↗
5. Krebs · Mater. Sci. Eng. B · 2007 · 138 · 10610.1016/j.mseb.2006.06.008 ↗
6. Low bandgap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
7. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
8. Charge-transfer range for photoexcitations in conjugated polymer/fullerene bilayers and blends10.1103/PhysRevB.56.4573 ↗
9. Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C-60 heterojunction photovoltaic cell10.1063/1.115797 ↗
10. Exciton diffusion and dissociation in conjugated polymer/fullerene blends and heterostructures10.1103/PhysRevB.59.15346 ↗
11. Creation of a gradient polymer–fullerene interface in photovoltaic devices by thermally controlled interdiffusion10.1063/1.1522830 ↗
12. Thickness dependence, in situ measurements, and morphology of thermally controlled interdiffusion in polymer-C60 photovoltaic devices10.1103/PhysRevB.69.165320 ↗
13. Improved morphology of polymer–fullerene photovoltaic devices with thermally induced concentration gradients10.1063/1.1845574 ↗
14. Laminated fabrication of polymeric photovoltaic diodes10.1038/26183 ↗
15. Polymer photovoltaic devices from stratified multilayers of donor–acceptor blends10.1002/1521-4095(200009)12:18<1367::AID-ADMA1367>3.0.CO;2-Z ↗
16. A hybrid planar-mixed molecular heterojunction photovoltaic cell10.1002/adma.200400617 ↗
17. The influence of the optoelectronic properties of poly(3-alkylthiophenes) on the device parameters in flexible polymer solar cells10.1016/j.orgel.2005.02.004 ↗
18. The interplay of efficiency and morphology in photovoltaic devices based on interpenetrating networks of conjugated polymers with fullerenes10.1016/S0379-6779(00)00276-9 ↗
19. Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites10.1088/0957-4484/15/9/035 ↗