journal article·2019-11

Enhanced efficiency and thermal stability of mesoscopic perovskite solar cells by adding PC70BM acceptor

Rahul Ranjan, Belal Usmani, Sudhir Ranjan, Hasitha C. Weerasinghe, Anand Singh, Ashish Garg, Raju Kumar Gupta

Publisher page

Abstract

Abstract Perovskite-based solar cells (PSCs) have emerged as a very promising solar photovoltaic technology with fivefold increase observed in the device efficiency within less than 10 years of its inception. The efficiency of these solar cells is strongly affected by the quality of perovskite layer surface coverage and its grain size. Although use of antisolvents such as chlorobenzene has been used to treat methylammonium lead iodide (CH3NH3PbI3) resulting in grain size of ca. 200–300 nm, one still needs to minimize the grain boundaries to reduce their impact on recombination. In this study, we have successfully incorporated [6, 6]-phenyl-C70-butyric acid methyl ester (PC70BM) acceptor as an additive in the perovskite layer of the mesoscopic solar cell devices, which not only leads to the formation of larger grains with fewer grain boundaries resulting in reduced charge carriers recombination, the band alignment between CH3NH3PbI3 and TiO2 was also found to improve. The device having the optimum PC70BM concentration in perovskite showed enhanced power conversion efficiency (PCE) due to improvement in current density (JSC) and fill-factor (FF), correlated to the decrease in charge transfer resistance (RCT). The devices using PC70BM additive exhibit over 15% improvement in the power conversion efficiency or PCE (15.5% for PC70BM containing device and 13.3% PCE for the reference device with no acceptor additive). More importantly, the device containing PC70BM acceptor additive, retained ca. 75% of the original PCE for 250 h when kept at 85 °C without encapsulation in an ambient at 20% RH.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Progress in tailoring perovskite based solar cells through compositional engineering: materials properties, photovoltaic performance and critical issues10.1016/j.mtener.2018.07.003 ↗
2. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
3. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
4. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
5. Long-range balanced electron- and hole-transport lengths in organic-inorganic ch3nh3pbi310.1126/science.1243167 ↗
6. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells10.1021/nl400349b ↗
7. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
8. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
9. Effect of tantalum doping in a TiO2 compact layer on the performance of planar spiro-OMeTAD free perovskite solar cells10.1039/C7TA09193A ↗
10. Ultrathin buffer layers of SnO2 by atomic layer deposition: perfect blocking function and thermal stability10.1021/acs.jpcc.6b09965 ↗
11. Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency10.1039/C6EE01037G ↗
12. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
13. Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques10.1021/nn506864k ↗
14. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
15. Understanding the rate-dependent J–V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field10.1039/C4EE03664F ↗
16. Doping and alloying for improved perovskite solar cells10.1039/C6TA08699C ↗
17. Polymer doping for high-efficiency perovskite solar cells with improved moisture stability10.1002/aenm.201701757 ↗
18. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
19. Long-term stability of organic–inorganic hybrid perovskite solar cells with high efficiency under high humidity conditions10.1039/C6TA08117G ↗
20. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
21. Efficient solution-processed bulk heterojunction perovskite hybrid solar cells10.1002/aenm.201402024 ↗
22. Bulk heterojunction perovskite–PCBM solar cells with high fill factor10.1038/nphoton.2016.3 ↗
23. Bulk heterojunction perovskite hybrid solar cells with large fill factor10.1039/C5EE00222B ↗
24. Enhanced photovoltaic performance and reduced hysteresis in perovskite-ICBA-based solar cells10.1016/j.orgel.2018.03.042 ↗
25. Modified fullerenes for efficient electron transport layer-free perovskite/fullerene blend-based solar cells10.1002/cssc.201700180 ↗
26. Organometal halide perovskite solar cells with improved thermal stability via grain boundary passivation using a molecular additive10.1002/adfm.201703546 ↗
27. Improving the photovoltaic performance of perovskite solar cells with acetate10.1038/srep38670 ↗
28. Inkjet printing of NiO films and integration as hole transporting layers in polymer solar cells
29. Pyrazolinofullerenes: a less known type of highly versatile fullerene derivatives10.1039/c1cs15105c ↗
30. Efficient regular perovskite solar cells based on pristine [70] fullerene as electron-selective contact10.1002/cssc.201600051 ↗
31. Progress in fullerene-based hybrid perovskite solar cells10.1039/C7TC04302C ↗
32. The functions of fullerenes in hybrid perovskite solar cells10.1021/acsenergylett.6b00657 ↗
33. Electrical study of trapped charges in copper-doped zinc oxide films by scanning probe microscopy for nonvolatile memory applications10.1371/journal.pone.0171050 ↗
34. Effects of high temperature and thermal cycling on the performance of perovskite solar cells: acceleration of charge recombination and deterioration of charge extraction10.1021/acsami.7b11250 ↗
35. Elucidation of charge recombination and accumulation mechanism in mixed perovskite solar cells10.1021/acs.jpcc.8b03948 ↗
36. Fast and low temperature growth of electron transport layers for efficient perovskite solar cells10.1039/C4TA06416J ↗
37. Role of the selective contacts in the performance of lead halide perovskite solar cells10.1021/jz500059v ↗