journal article·2019-10

CsBr interface modification to improve the performance of perovskite solar cells prepared in ambient air

Sixuan Chen, Jingjing Dong, Jian Wu, Shaochuan Hou, Jie Xing, Hao Liu, Huiying Hao

Publisher page

Abstract

Abstract For future mass production, it is the best choice to fabricate highly efficient and stable perovskite solar cells (PSCs) in the ambient air. Interface modification is widely reported as an effective method for boosting the power conversion efficiency (PCE) and stability of PSCs. In our manuscript, CsBr as the interface modification material was introduced into the mesoporous TiO2 (mp-TiO2) via two ways: doping into the mp-TiO2 layer and inserting between the mp-TiO2 and perovskite films. It was found that CsBr interface modification, especially by doping into the mp-TiO2 layer, can passivate the trap states originated from VO in mp-TiO2 leading to enhanced carrier transport properties, meliorate surface property of mp-TiO2 resulting in high-quality perovskite films, improve the carrier extraction and decrease the trap recombination in the interface. High-quality perovskite films, with increased grain size, reduced grain boundaries and pinholes, were obtained after CsBr modification, and further applied for the PSCs. The whole preparation process of the PSCs was finished in ambient air. The champion device with CsBr doped into the mp-TiO2 layer yielded a highest PCE of 17.33%, while the pristine device showed a PCE of 14.95%. Furthermore, the champion PSC with CsBr doped into the mp-TiO2 layer exhibited a much better stability, which could maintain over 80% of the original PCE after 1000h storing in ambient air without any encapsulation. This work presents an approach to develop air-processed efficient and stable PSCs by interface modification for future mass production.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Fabrication of efficient organic-inorganic perovskite solar cells in ambient air10.1186/s11671-018-2714-z ↗
3. National Renewable Energy Laboratory (NREL) · 2019
4. Transformation of the excited state and photovoltaic efficiency of CH3NH3PbI3 perovskite upon controlled exposure to humidified air10.1021/ja511132a ↗
5. Carbon nanotube/polymer composites as a highly stable hole collection layer in perovskite solar cells10.1021/nl501982b ↗
6. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
7. Effects of surface blocking layer of Sb2S3 on nanocrystalline TiO2 for CH3NH3PbI3 perovskite solar cells10.1021/jp500449z ↗
8. Cesium iodide interface modification for high efficiency, high stability and low hysteresis perovskite solar cells10.1016/j.electacta.2017.03.139 ↗
9. Boosting the efficiency of perovskite solar cells with CsBr-modified mesoporous TiO2 beads as electron-selective contact10.1002/adfm.201705763 ↗
10. Performance enhancement of mesoporous TiO2-based perovskite solar cells by SbI3 interfacial modification layer10.1021/acsami.8b10062 ↗
11. Enhanced performance of perovskite solar cells by using ultrathin BaTiO3 interface modification10.1021/acsami.8b16358 ↗
12. Niobium doping effects on TiO2 mesoscopic electron transport layer-based perovskite solar cells10.1002/cssc.201403478 ↗
13. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
14. Mg-doped TiO2 boosts the efficiency of planar perovskite solar cells to exceed 19%10.1039/C6TA06879K ↗
15. High efficiency MAPbI3-xClx perovskite solar cell via interfacial passivation10.1039/C8NR05504A ↗
16. Improving the optoelectronic properties of mesoporous TiO2 by cobalt doping for high-performance hysteresis-free perovskite solar cells10.1021/acsami.7b16312 ↗
17. Sulfate-assisted interfacial engineering for high yield and efficiency of triple cation perovskite solar cells with alkali-doped TiO2 electron-transporting layers10.1002/adfm.201706287 ↗
18. Hysteresis-less mesoscopic CH3NH3PbI3 perovskite hybrid solar cells by introduction of Li-treated TiO2 electrode10.1016/j.nanoen.2015.05.014 ↗
19. A biopolymer heparin sodium interlayer anchoring TiO2 and MAPbI3 enhances trap passivation and device stability in perovskite solar cells10.1002/adma.201706924 ↗
20. Mesoscopic oxide double layer as electron specific contact for highly efficient and UV stable perovskite photovoltaics10.1021/acs.nanolett.7b05469 ↗
21. Enhancing efficiency of planar structure perovskite solar cells using Sn-doped TiO2 as electron transport layer at low temperature10.1016/j.electacta.2017.12.108 ↗
22. Ru-doping in TiO2 electron transport layers of planar heterojunction perovskite solar cells for enhanced performance10.1039/C7TC05252A ↗
23. Interface passivation using ultrathin polymer-fullerene films for high-efficiency perovskite solar cells with negligible hysteresis10.1039/C7EE01096F ↗
24. A NH4F interface passivation strategy to produce air-processed high-performance planar perovskite solar cells10.1016/j.electacta.2018.06.112 ↗
25. Enhanced performance of mesostructured perovskite solar cells in ambient conditions with a composite TiO2-In2O3 electron transport layer10.1016/j.solmat.2017.03.024 ↗
26. High performance planar perovskite solar cells with a perovskite of mixed organic cations and mixed halides, MA1-xFAxPbI3-yCly10.1039/C6TA03381D ↗
27. CsI pre-intercalation in the inorganic framework for efficient and stable FA1-xCsxPbI3(Cl) perovskite solar cells10.1002/smll.201700484 ↗
28. Bandgap-tunable cesium lead halide perovskites with high thermal stability for efficient solar cells10.1002/aenm.201502458 ↗
29. Planar-structure perovskite solar cells with efficiency beyond 21%10.1002/adma.201703852 ↗
30. Diboron-assisted interfacial defect control strategy for highly efficient planar perovskite solar cells10.1002/adma.201805085 ↗