Light management design in ultra-thin chalcopyrite photovoltaic devices by employing optical modelling
Source abstract
Abstract
In ultra-thin chalcopyrite solar cells and photovoltaic modules, efficient light management is required to increase the photocurrent and to gain in conversion efficiency. In this work we employ optical modelling to investigate different optical approaches and quantify their potential improvements in the short-circuit current density of Cu(In, Ga)Se 2 (CIGS)devices. For structures with an ultra-thin (500 nm)CIGS absorber, we study the improvements related to the introduction of (i)highly reflective metal back reflectors, (ii)internal nano-textures applied to the substrate and (iii)external micro-textures by using a light management foil. In the analysis we use CIGS devices in a PV module configuration, thus, solar cell structure including encapsulation and front glass. A thin Al 2 O 3 layer was considered in the structure at the rear side of CIGS for passivation and diffusion barrier for metal reflectors. We show that not any individual aforementioned approach is sufficient to compensate for the short circuit drop related to ultra-thin absorber, but a combination of a highly reflective back contact and textures (internal or external)is needed to obtain and also exceed the short-circuit current density of a thick (1800 nm)CIGS absorber.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Solar Frontier hits 23.35% efficiency with thin-film cell
2. High efficiency and large volume production of CIS-based modules
3. Thin-film solar cells exceeding 22% solar cell efficiency: an overview on CdTe-, Cu(In,Ga)Se2-, and perovskite-based materials10.1063/1.5061809 ↗
4. An assessment of metal supply sustainability as an input to policy: security of supply extraction rates, stocks-in-use, recycling, and risk of scarcity10.1016/j.jclepro.2015.06.085 ↗
5. British Geological Survey, Risk list
6. Ultra-thin Cu(In,Ga)Se2 solar cells prepared by an alternative hybrid co-sputtering/evaporation process10.1016/j.tsf.2016.08.015 ↗
7. Ultrathin Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2016.11.029 ↗
8. Optical properties of ultrathin CIGS films studied by spectroscopic ellipsometry assisted by chemical engineering10.1016/j.apsusc.2016.10.037 ↗
9. Light absorption enhancement in ultra-thin Cu(In,Ga)Se2 solar cells by substituting the back-contact with a transparent conducting oxide based reflector10.1016/j.tsf.2016.10.006 ↗
10. Efficiency increased to 15.2% for ultra-thin Cu(In,Ga)Se2 solar cells10.1002/pip.3033 ↗
11. Passivation of interfaces in thin film solar cells: understanding the effects of a nanostructured rear point contact layer10.1002/admi.201701101 ↗
12. Introduction of Si PERC rear contacting design to boost efficiency of Cu(in,Ga)Se\bf 2Solar cells10.1109/JPHOTOV.2014.2350696 ↗
13. A study to improve light confinement and rear-surface passivation in a thin-Cu(In, Ga)Se2 solar cell10.1016/j.tsf.2018.11.027 ↗
14. Lithographic fabrication of point contact with Al2O3 rear-surface-passivated and ultra-thin Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2018.08.044 ↗
15. Efficiency loss prevention in monolithically integrated thin film solar cells by improved front contact10.1002/pip.2459 ↗
16. Enhanced absorption in tandem solar cells by applying hydrogenated In2O3 as electrode10.1063/1.4936328 ↗
17. Multi-material front contact for 19% thin film solar cells
18. Interface-barrier-induced J–V distortion of CIGS cells with sputtered-deposited Zn(S,O) window layers10.1109/JPHOTOV.2014.2301894 ↗
19. Cu(In,Ga)Se2 solar cells with controlled conduction band offset of window/Cu(In,Ga)Se2 layers10.1063/1.1366655 ↗
20. Enhancement of the CIGS solar cell's efficiency by anti-reflection coating with Teflon AF10.3938/jkps.65.1517 ↗
21. Towards ultrathin copper indium gallium diselenide solar cells: proof of concept study by chemical etching and gold back contact engineering10.1002/pip.2162 ↗
22. Advanced light management based on periodic textures for Cu(In,Ga)Se2 thin-film solar cells10.1364/OE.24.00A693 ↗
23. Optical confinement in chalcopyrite based solar cells10.1016/j.tsf.2016.08.056 ↗
24. Light trapping in ultrathin CIGS solar cells with nanostructured back mirrors10.1109/JPHOTOV.2017.2726566 ↗
25. Quenching Mo optical losses in CIGS solar cells by a point contacted dual-layer dielectric spacer: a 3-D optical study10.1364/OE.26.000A39 ↗
26. Integration of plasmonic Ag nanoparticles as a back reflector in ultra-thin Cu(In,Ga)Se2 solar cells10.1016/j.apsusc.2015.07.195 ↗
27. Light coupling and trapping in ultrathin Cu(in,Ga)Se2 solar cells using dielectric scattering patterns10.1021/acsnano.5b04091 ↗
28. Highly reflective rear surface passivation design for ultra-thin Cu(In,Ga) Se-2 solar cells10.1016/j.tsf.2014.10.050 ↗
29. Review on light management by nanostructures in chalcopyrite solar cells10.1088/1361-6641/aa59ee ↗
30. One-dimensional semi-coherent optical model for thin film solar cells with rough interfaces
31. Optical modeling of a-Si:H solar cells deposited on textured glass/SnO2 substrates10.1063/1.1487910 ↗
32. Analysis of light scattering in amorphous Si:H solar cells by a one-dimensional semi-coherent optical model10.1002/pip.460 ↗
33. Optical model for thin-film photovoltaic devices with large surface textures at the front side
34. Combined model of non-conformal layer growth for accurate optical simulation of thin-film silicon solar cells10.1016/j.solmat.2013.05.016 ↗
35. Scalar scattering theory for multilayer optical coatings10.1117/12.7972335 ↗
36. Beckmann · 1987
37. The COMSOL® Software Product Suite
38. Jin · 2002
39. Two approaches for incoherent propagation of light in rigorous numerical simulations10.2528/PIER13010407 ↗
40. Prediction of defective regions in optimisation of surface textures in thin-film silicon solar cells using combined model of layer growth10.1016/j.tsf.2014.11.053 ↗
41. Orfanidis · 2010
42. Optical and electrical modeling of Cu(In,Ga)Se2 solar cells10.1007/s11082-006-9049-1 ↗
43. Addressing the impact of rear surface passivation mechanisms on ultra-thin Cu(In,Ga)Se-2 solar cell performances using SCAPS 1-D model10.1016/j.solener.2017.08.055 ↗
44. Investigating the electronic properties of Al2O3/Cu(In, Ga)Se-2 interface10.1063/1.4932512 ↗
45. Influence of the Cu(In,Ga)Se2 thickness and Ga grading on solar cell performance10.1002/pip.462 ↗
46. refractiveindex
47. Impact of Mo barrier layer on the formation of MoSe2 in Cu(In,Ga)Se2 solar cells10.1016/j.jallcom.2015.11.194 ↗
48. Determination of light scattering properties of Cu(In, Ga)Se2 films for solar cells
49. Levinson · 2011
50. High fidelity transfer of nanometric random textures by UV embossing for thin film solar cells applications10.1016/j.solmat.2010.11.010 ↗
51. UV nanoimprint for the replication of etched ZnO: Al textures applied in thin-film silicon solar cells10.1002/pip.2382 ↗
52. Krc · 2013
53. Relationship between the cell thickness and the optimum period of textured back reflectors in thin-film microcrystalline silicon solar cells10.1063/1.4790642 ↗
54. Microtextured light-management foils and their optimization for planar organic and perovskite solar cells
55. Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature10.1039/C5EE02965A ↗
56. Quantification and validation of the efficiency enhancement reached by application of a retroreflective light trapping texture on a polymer solar cell10.1002/aenm.201300227 ↗
57. Analysis of short circuit current gains by an anti-reflective textured cover on silicon thin film solar cells10.1002/pip.2249 ↗