Thermal-evaporated selenium as a hole-transporting material for planar perovskite solar cells
Source abstract
Abstract
Abstract A hole-transporting layer is essential for effective operation of planar perovskite solar cells. Hole-transporting materials (HTMs) used so far are mainly based on organic semiconductors, which are usually expensive and relatively instable compared with inorganic materials. In this article, crystalline selenium (c-Se) prepared by thermal evaporation followed by annealing at low temperature was used as the hole-transporting layer for the planar perovskite solar cells in the device structure of fluorine-doped tin oxide (FTO)/SnO2/perovskite/selenium/Au. The device employing c-Se as HTM displayed enhanced long-term stability, keeping 80% of the original efficiency after 40 days in ambient environment. However, the power conversion efficiency of 8.3% remains low compared with the device based on spiroOMeTAD, which results from higher recombination in the c-Se device as determined by impedance spectroscopy. Thermal-evaporated selenium could be a low-cost and easy-fabrication HTM for efficient and stable perovskite solar cells after reducing the recombination in devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells10.1021/ja809598r ↗
2. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
3. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
4. Electron-hole diffusion lengths exceeding 1 μm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
5. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
6. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater thPan 21%10.1038/nenergy.2016.142 ↗
7. Self-formed grain boundary healing layer for highly efficient CH3 NH3 PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
8. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
9. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
10. Stability of perovskite solar cells: a prospective on the substitution of the A cation and X anion10.1002/anie.201603694 ↗
11. Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies10.1038/26936 ↗
12. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
13. Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency10.1038/ncomms4834 ↗
14. Thermal stability of CuSCN hole conductor‐based perovskite solar cells10.1002/cssc.201600957 ↗
15. Two‐step physical deposition of a compact CuI Hole‐transport layer and the formation of an interfacial species in perovskite solar cells10.1002/cssc.201600132 ↗
16. An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide10.1021/ja411014k ↗
17. CuGaO2: a promising inorganic hole‐transporting material for Highly efficient and stable perovskite solar cells
18. Facile scalable synthesis of MoO2 nanoparticles by new solvothermal cracking process and their application to hole transporting layer for CH3NH3 PbI3 planar perovskite solar cells10.1016/j.cej.2016.10.110 ↗
19. Colloidal CuInS2 quantum dots as inorganic hole-transporting material in perovskite solar cells10.1021/acsami.5b05104 ↗
20. Kesterite Cu2ZnSnS4 as a low-cost inorganic hole-transporting material for high-efficiency perovskite solar cells10.1021/acsami.5b09572 ↗
21. Solution-processed Cu (In, Ga)(S, Se) 2 nanocrystal as inorganic hole-transporting material for efficient and stable perovskite solar cells10.1186/s11671-017-1933-z ↗
22. Efficient ITO/Se heterojunction solar cells10.1143/JJAP.23.L587 ↗
23. Polycrystalline thin-film TiO2/Se solar cells10.1143/JJAP.24.L536 ↗
24. Selenium as a photoabsorber for inorganic–organic hybrid solar cells10.1039/C4CP02821J ↗
25. 3-D solar cells by electrochemical-deposited Se layer as extremely-thin absorber and hole conducting layer on nanocrystalline TiO2 electrode10.1186/1556-276X-8-8 ↗
26. Solution-processed air-stable mesoscopic selenium solar cells10.1021/acsenergylett.6b00249 ↗
27. The hole mobility in selenium10.1088/0370-1328/76/6/302 ↗
28. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC (NH2) 2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
29. Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells10.1039/C6EE00030D ↗
30. Spontaneous organization of three-dimensionally packed trigonal selenium microspheres into large-area nanowire networks10.1002/adma.200305519 ↗
31. A facile solution-phase deposition approach to porous selenium materials10.1039/b702008b ↗
32. Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells10.1039/C6EE02139E ↗
33. Thiophene and diketopyrrolopyrrole based conjugated polymers as efficient alternatives to spiroOMeTAD in perovskite solar cells as hole transporting layers10.1039/C7TC00966F ↗