Fabrication of air-stable, large-area, PCDTBT:PC70BM polymer solar cell modules using a custom built slot-die coater
Source abstract
Abstract
Abstract Polymer solar cell (PSC) manufacturing is strongly influenced by the thin film deposition method with the morphology of the bulk heterojunction (BHJ) coupled intimately to the efficiency of the device. Although ideally scalable deposition methods suitable for sheet-to-sheet (S2S) or roll-to-roll (R2R) production should be used in the investigation of PSCs, research still predominately relies on spin-coating due to ease of use and lower associated costs. Here we present the development and characterization of a lab-scale slot-die coater and demonstrate its use to fabricate air-stable, large-area, solar cell modules. We adapt an entry level paint applicator into a fully-functional S2S slot-die coater and provide its open source documentation to support the research community in availing itself of scalable photovoltaic technologies for device fabrication. The optimization of the process parameters results in homogeneous layers that have been extensively characterized by light beam induced current (LBIC), micro photoluminescence (PL), and micro Raman mapping of whole modules. We report the successful demonstration of the fabrication of PSC modules with an active area above 35 cm 2 and a power conversion efficiency exceeding 3%. We also investigate the behavior of the module characteristics at different annealing temperatures and its stability during operation under ambient conditions. This work will facilitate research on scaling up of laboratory organic electronic devices and allow more efficient transition from Lab-to-Fab.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
2. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
3. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
4. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
5. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
6. A facile route to inverted polymer solar cells using a precursor based zinc oxide electron transport layer10.1016/j.orgel.2010.06.002 ↗
7. Minimal long-term intrinsic degradation observed in a polymer solar cell illuminated in an oxygen-free environment10.1021/cm504650a ↗
8. The mechanism of burn-in loss in a high efficiency polymer solar cell10.1002/adma.201103010 ↗
9. PCDTBT based solar cells: one year of operation under real-world conditions10.1038/srep21632 ↗
10. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
11. 25th Anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
12. Inorganics-in-Organics: recent developments and outlook for 4G polymer solar cells10.1039/c3nr02733c ↗
13. The true status of solar cell technology10.1038/nphoton.2015.45 ↗
14. A critical look at organic photovoltaic fabrication methodology: Defining performance enhancement parameters relative to active area10.1016/j.solmat.2014.07.054 ↗
15. Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules10.1039/C4EE01223B ↗
16. Hybrid graphene-metal oxide solution processed electron transport layers for large area high-performance organic photovoltaics10.1002/adma.201304780 ↗
17. Upscaling from single cells to modules - fabrication of vacuum- and ITO-free polymer solar cells on flexible substrates with long lifetime10.1039/C3TC31859A ↗
18. Roll and roll-to-roll process scaling through development of a compact flexo unit for printing of back electrodes10.1016/j.solmat.2015.04.007 ↗
19. 25th Anniversary article: rise to power -- opv-based solar parks10.1002/adma.201302031 ↗
20. Highly efficient, large area, roll coated flexible and rigid OPV modules with geometric fill factors up to 98.5% processed with commercially available materials10.1039/C5EE03315B ↗
21. High efficiency arrays of polymer solar cells fabricated by spray-coating in air10.1002/pip.2665 ↗
22. Effect of solvent on large-area polymer-fullerene solar cells fabricated by a slot-die coating method10.1016/j.solmat.2014.03.042 ↗
23. Layout flexibility for sheet-to-sheet produced flexible ITO-free organic solar modules with organic functional layers slot die coated under ambient atmospheric conditions10.1016/j.solmat.2014.11.043 ↗
24. Solar trees: first large-scale demonstration of fully solution coated, semitransparent, flexible organic photovoltaic modules10.1002/advs.201500342 ↗
25. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
26. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
27. Simple roll coater with variable coating and temperature control for printed polymer solar cells10.1016/j.solmat.2011.08.027 ↗
28. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
29. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
30. Comparison of large scale coating techniques for organic and hybrid films in polymer based solar cells10.1016/j.cep.2012.03.004 ↗
31. PCDTBT: en route for low cost plastic solar cells10.1039/c3ta12420g ↗
32. The state of organic solar cells - A meta analysis10.1016/j.solmat.2013.05.034 ↗
33. Size effect on organic optoelectronics devices: example of photovoltaic cell efficiency10.1016/j.physleta.2007.09.068 ↗
34. Hybrid carbon nanotube networks as efficient hole extraction layers for organic photovoltaics10.1021/nn304705t ↗
35. Fast inline roll-to-roll printing for indium-tin-oxide-free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
36. Silver grid transparent conducting electrodes for organic light emitting diodes10.1016/j.orgel.2014.09.036 ↗
37. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
38. Constructing the nanointerpenetrating structure of PCDTBT: pc70bm bulk heterojunction solar cells induced by aggregation of PC70BM via mixed-solvent vapor annealing10.1039/c3ta10629b ↗
39. Photo-electrical characterizations of plastic solar modules10.1016/j.solmat.2012.01.030 ↗
40. Spatially resolved photocurrent mapping of efficient organic solar cells fabricated on a woven mesh electrode10.1002/pip.1242 ↗
41. Two-dimensional photocurrent and transmission mapping of aqueous dye-sensitized solar cells10.1021/jp308238p ↗
42. Elaboration of PCDTBT} nanorods and nanoflowers for augmented morphological and optical properties10.1016/j.matlet.2014.05.158 ↗
43. Raman micro-spectroscopy for quantitative thickness measurement of nanometer thin polymer films10.1002/jrs.4749 ↗
44. Raman spectroscopic investigation of film thickness10.1016/j.polymertesting.2009.05.001 ↗
45. Sampling considerations for ft-raman spectroscopy of polymers and solutions10.1366/0003702981942915 ↗
46. Raman scattering as a technique of measuring film thickness: interference effects in thin growing films10.1364/AO.26.004482 ↗
47. Comparative degradation and regeneration ofpolymer solar cells with different cathodes10.1021/am500637n ↗
48. Correlating triplet yield, singlet oxygen generation and photochemical stability in polymer/fullerene blend films10.1039/c2cc38243a ↗