Polycrystalline Cu2O photovoltaic devices incorporating Zn(O,S) window layers
Source abstract
Abstract
The tunability of the Zn(O,S) conduction band edge makes it an ideal, earth-abundant heterojunction partner for Cu_(2)O, whose low electron affinity has limited photovoltaic performance with most other heterojunction candidates. However, to date Cu_(2)O/Zn(O,S) solar cells have exhibited photocurrents well below the entitled short-circuit current in the detailed balance limit. In this work, we examine the sources of photocurrent loss in Cu_(2)O/Zn(O,S) solar cells fabricated by sputter deposition of Zn(O,S) on polycrystalline Cu_(2)O substrates grown by thermal oxidation of Cu foils. X-ray photoelectron spectra reveal that Zn(O,S) deposited at room temperature leads to a thin layer of ZnSO_4 at the Zn(O,S)/Cu_(2)O interface that impedes current collection and limits the short circuit current density to 2 mA/cm^2. Deposition of Zn(O,S) at elevated temperatures decreases the presence of interfacial ZnSO_4 and therefore the barrier to photocurrent collection. Optimal photovoltaic performance is achieved at a Zn(O,S) deposition temperature of 100°C, which enables an increase in the short circuit current density to 5 mA/cm^2, although a small ZnSO_4 layer is still present. Deposition at temperatures above 100°C leads to a reduction in photovoltaic performance. Spectral response measurements indicate the presence of a barrier to photocurrent and exhibit a strong dependence on voltage and light bias, likely due to the photodoping of Zn(O,S) layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Experimental and theoretical studies of Cu2O solar cells10.1016/0379-6787(82)90050-3 ↗
2. Efficiency enhancement using a Zn1−xGexO thin film as an n-type window layer in Cu2O-based heterojunction solar cells10.7567/APEX.9.052301 ↗
3. Interface stoichiometry control to improve device voltage and modify band alignment in ZnO/Cu2O heterojunction solar cells10.1039/C4EE01956C ↗
4. Band offsets of n-type electron-selective contacts on cuprous oxide (Cu2O) for photovoltaics10.1063/1.4905180 ↗
5. M.W. Chase, Jr., C.A. Davies, J.R. Downey, Jr., D.J. Frurip, R.A. McDonald, A.N. Syverud, NIST-JANAF Thermochemical Tables. 〈http://kinetics.nist.gov/janaf/janbanr.html〉, 1986.
6. S.S. Wilson, Zn-VI/Cu2O Heterojunctions for Earth-Abundant Photovoltaics, Ph.D. Dissertation, California Institute of Technology. 〈http://resolver.caltech.edu/CaltechTHESIS:05212015-091546304〉, 2015.
7. Heterojunction solar cell with 6% efficiency based on an n-type aluminum–gallium–oxide thin film and p-type sodium-doped Cu2O sheet10.7567/APEX.8.022301 ↗
8. Atomic layer deposited gallium oxide buffer layer enables 1.2 V open-circuit voltage in cuprous oxide solar cells10.1002/adma.201401054 ↗
9. Photoresponse enhancement of Cu2O solar cell with sulfur-doped ZnO buffer layer to mediate the interfacial band alignment10.1016/j.solmat.2015.10.013 ↗
10. Sputtered Zn(O,S) for junction formation in chalcopyrite-based thin film solar cells10.1002/pssr.201004083 ↗
11. Scheer · 2011
12. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
13. Y. Tolstova, Cu2O Heterojunction Photovoltaics, Ph.D. Dissertation, California Institute of Technology. 〈http://resolver.caltech.edu/CaltechTHESIS:06012016-163813213〉, 2016.
14. Surface spectroscopic characterization of the interaction between zinc ions and γ-alumina10.1016/0021-9517(84)90372-5 ↗
15. NIST X-ray Photoelectron Spectroscopy Database, Version 4.1, NIST, Gaithersburg. 〈http://srdata.nist.gov/xps/〉, 2012.