journal article·2016-10

Impact of environmentally friendly processing on polymer solar cells: Performance, thermal stability and morphological study by imaging techniques

Margherita Bolognesi, Mario Prosa, Marta Tessarolo, Giovanni Donati, Stefano Toffanin, Michele Muccini, Mirko Seri

Publisher page

Abstract

The combination of mass-production compatible coating techniques and environmentally friendly solvents to process bulk heterojunction solar cells represents a key issue to scale up this technology. In this work we demonstrate that using a benchmark polymer HBG-1 blended with PC61BM, the replacement of a common chlorinated processing solvent (orthodichlorobenzene) with a non-chlorinated analogous (o-xylene) not only allows the fabrication of blade-coated bulk heterojunction devices with identical photovoltaic performance, but also determines a great enhancement of the resulting thermal stability. Thermal degradation tests were carried out in inert atmosphere, by keeping the solar cells onto a hot plate at 85 °C and monitoring their OPV performance. In parallel, the morphological changes of the active layers induced by thermal stress are investigated by combining two complementary light-based imaging techniques, laser scanning confocal and photocurrent microscopy, which offer the great advantage to simultaneously study on complete devices the blend morphology and the electrical properties, point-by-point, of the active layer even in regions unlikely accessible (e.g. the active area under the top electrode) using other techniques. As a result, we found that solar cells processed from a non-chlorinated based solvent, in comparison to an analogous reference system, exhibit a different evolution of the resulting BHJ morphology during thermal ageing, in perfect agreement with the corresponding photovoltaic responses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. The state of organic solar cells -A meta analysis10.1016/j.solmat.2013.05.034 ↗
2. 25th Anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
3. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
4. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
5. A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%10.1039/C4EE03048F ↗
6. Single-junction polymer solar cells with over 10% efficiency by a novel two-dimensional donor–acceptor conjugated copolymer10.1021/am509047g ↗
7. Solution-processable polymeric solar cells: a review on materials, strategies and cell architectures to overcome 10%10.1016/j.orgel.2015.01.014 ↗
8. Fine structural tuning of cyanated dithieno[3,2-b:2',3'-d]silol−oligothiophene copolymers: synthesis, characterization, and photovoltaic response10.1021/ma4011186 ↗
9. Spider-like oligothiophenes10.1002/chem.200701117 ↗
10. Structural factors that affect the performance of organic bulk heterojunction solar cells10.1021/ma400924b ↗
11. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene): (6),6]-phenyl-c61-butyric acid methyl ester system10.1021/cr300005u ↗
12. Morphology of all-polymer solar cells10.1039/c2ee03071c ↗
13. Influence of incorporating different electron-rich thiophene-based units on the photovoltaic properties of isoindigo-based conjugated polymers: an experimental and DFT study10.1021/ma401691r ↗
14. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
15. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (ptb7-th) (for high performance)10.1002/adma.201301476 ↗
16. Efficiency enhancement of P3HT: PCBM solar cells containing scattering Zn-Al hydrotalcite nanoparticles in the PEDOT: PSS layer10.2478/oph-2013-0001 ↗
17. Environmentally printing efficient organic tandem solar cells with high fill factors: a guideline towards 20% power conversion efficiency10.1002/aenm.201400084 ↗
18. Large scale deployment of polymer solar cells on land, on sea and in the air10.1039/c3ee43212b ↗
19. Organic photovoltaic greenhouses: a unique application for semi-transparent PV?10.1039/C4EE03132F ↗
20. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
21. Towards industrialization of polymer solar cells: material processing for upscaling10.1039/C4TA03780D ↗
22. Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells10.1039/c3ee41915k ↗
23. Molecular design and morphology control towards efficient polymer solar cells processed using non-aromatic and non-chlorinated solvents10.1002/adma.201304825 ↗
24. 8.7% Power conversion efficiency polymer solar cell realized with non-chlorinated solvents10.1016/j.solmat.2014.11.042 ↗
25. Efficient polymer solar cells based on poly(3-hexylthiophene) (and indene–c60 bisadduct fabricated with non-halogenated solvents)10.1021/am500836u ↗
26. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
27. Induced photodegradation of quinoxaline based copolymers for photovoltaic applications10.1016/j.solmat.2015.08.015 ↗
28. Enhanced ultraviolet stability of air-processed polymer solar cells by al doping of the ZnO interlayer10.1021/acsami.5b08255 ↗
29. How to model the behaviour of organic photovoltaic cells10.1002/pi.2038 ↗
30. Tuning the morphology of all-polymer opvs through altering polymer–solvent interactions10.1021/cm502112z ↗
31. Morphology and phase segregation of spin-casted films of polyfluorene/pcbm blends10.1021/ma070712a ↗
32. Effects of cathode confinement on the performance of polymer/fullerene photovoltaic cells in the thermal treatment10.1109/TED.2010.2100820 ↗
33. Electron barrier formation at the organic-back contact interface is the first step in thermal degradation of polymer solar cells10.1002/adfm.201304166 ↗
34. Plasticization in ultrathin polymer films: the role of supporting substrate and annealing10.1021/ma301980w ↗
35. Chlorine-free processed high performance organic solar cells10.1039/C4RA01783H ↗
36. Halogen-free solvent processing for sustainable development of high efficiency organic solar cells10.1016/j.orgel.2012.08.026 ↗
37. Phosphonated conjugated polymers for polymer solar cells with a non-halogenated solvent process10.1039/C4PY01294A ↗
38. Krebs · 2012
39. Visualizing physical, electronic, and optical properties of organic photovoltaic cells10.1039/c3ee41773e ↗
40. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques - the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
41. Water ingress in encapsulated inverted organic solar cells: correlating infrared imaging and photovoltaic performance10.1002/aenm.201501065 ↗
42. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
43. Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution10.1039/C5EE01917F ↗
44. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
45. Photophysical and electronic properties of five PCBM-like C60 derivatives: spectral and quantum chemical view10.1021/jp208520v ↗
46. Location of the lowest exciton in C60 single crystal by two-photon excitation spectroscopy10.1016/0009-2614(95)00973-8 ↗
47. Absorption at the dipole-forbidden optical gap of crystalline C6010.1016/0009-2614(95)00175-4 ↗