DSSCs with ZnO@TiO2 core–shell photoanodes showing improved V: Modification of energy gradients and potential barriers with Cd and Mg ion dopants
Source abstract
Abstract
Abstract ZnO@TiO2 core–shell nanostructures have been manipulated with metal ion dopants to create DSSC photoanodes with reduced charge transfer recombination. ZnO and TiO2 were modified by doping with Cd and Mg, respectively, resulting in a reduction in the band-gap for Cd:ZnO and an increase in the band-gap for Mg:TiO2. A series of core–shell nanostructures based on a ZnO or a Cd:ZnO core and TiO2 or a Mg:TiO2 shell have been investigated as DSSC photoanodes. In another series, the core–shell materials were reversed for complete evaluation of our hypothesis. The structures of the core–shell nanoparticles, optoelectronic and interfacial charge transfer of the DSSCs were analyzed by XRD, SEM, TEM, XPS, Mott-Schottky experiment, UV–vis DRS, J–V and EIS measurements. The power conversion efficiencies (PCEs) of DSSCs based on these core–shell structures were observed to depend on the flat band of the shell oxide relative to that of the core oxide. DSSCs with Cd:ZnO@Mg:TiO2 and Cd:ZnO@TiO2 photoanodes achieved Voc and FF values comparable to those of DSSCs with TiO2 anodes. A moderate energy gradient and high potential barrier in these core–shell structures resulted in longer effective electron lifetimes and lower electron recombination in the corresponding DSSCs. The low PCE registered for DSSCs with anodes of Cd:ZnO@Mg:TiO2 and Cd:ZnO@TiO2 were attributed to the presence of a high proportion of rutile phase, caused by sintering at 650 °C and lower dye adsorption as a result larger particle sizes caused by Cd doping.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
2. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
3. Porphyrin-sensitized solar cells with cobalt (II/III)–based redox electrolyte exceed 12 percent efficiency10.1126/science.1209688 ↗
4. Controlled electron injection and transport at materials interfaces in dye sensitized solar cells10.1016/j.mser.2008.09.001 ↗
5. The generalized Shockley–Queisser limit for nanostructured solar cells10.1038/srep13536 ↗
6. ZnO–TiO2 nanocomposite films for high light harvesting efficiency and fast electron transport in dye-sensitized solar cells10.1021/jp304622d ↗
7. Synthesis and characterization of TiO2/ZnO core/shell nanomaterials for solar cell applications10.1016/j.renene.2011.12.014 ↗
8. Visible-light-responsive TiO2-coated ZnO:I nanorod array films with enhanced photoelectrochemical and photocatalytic performance10.1021/acsami.5b00980 ↗
9. ZnO@TiO2 core–shell nanorod arrays with enhanced photoelectrochemical performance10.1016/j.solener.2013.06.003 ↗
10. Performance of dye-sensitized solar cells based on various sensitizers applied on TiO2–Nb2O5 core/shell photoanode structure10.1007/s10008-014-2394-2 ↗
11. Enhancement of photovoltaic performance of dye-sensitized solar cells by modifying tin oxide nanorods with titanium oxide layer10.1021/jp309193n ↗
12. Slow interfacial charge recombination in solid-state dye-sensitized solar cell using Al2O3-coated nanoporous TiO2 films10.1016/j.solmat.2003.11.005 ↗
13. Core–shell nanoporous electrode for dye sensitized solar cells: the effect of shell characteristics on the electronic properties of the electrode10.1016/j.ccr.2004.03.003 ↗
14. Fabrication of ZnO/Cu2O heterojunctions in atmospheric conditions: improved interface quality and solar cell performance10.1016/j.solmat.2014.09.018 ↗
15. Stability of the SnO2/MgO dye-sensitized photoelectrochemical solar cell10.1016/j.solmat.2006.11.008 ↗
16. Improvement in dye-sensitized solar cells with a ZnO-coated electrode by rf magnetron sputtering10.1063/1.2903105 ↗
17. Electron transport in dye-sensitized solar cells based on ZnO nanotubes: evidence for highly efficient charge collection and exceptionally rapid dynamics10.1021/jp810406q ↗
18. A 5% efficient photoelectrochemical solar cell based on nanostructured ZnO electrodes10.1016/S0927-0248(01)00110-6 ↗
19. Solvent-free ZnO dye-sensitised solar cells10.1016/j.solmat.2009.06.021 ↗
20. Degradation mechanism of ZnO-based dye-sensitized solar cells10.1016/j.solmat.2009.10.007 ↗
21. Nanostructured ZnO electrodes for dye-sensitized solar cell applications10.1016/S1010-6030(02)00039-4 ↗
22. The effect of shell chracteristics on current-voltage behaviors of dye-sensitized solar cells based on core/shell arrays10.1063/1.3167811 ↗
23. High-efficiency solid-state dye-sensitized solar cells based on TiO2-coated ZnO nanowire arrays10.1021/nl3004144 ↗
24. Achievement of 4.51% conversion efficiency using ZnO recombination barrier layer in TiO2 based dye-sensitized solar cells10.1063/1.2410240 ↗
25. Optical properties of ZnO nanocrystals doped with Cd, Mg, Mn, and Fe ions10.1021/jp0654415 ↗
26. Optical investigation on cadmium-doped zinc oxide nanoparticles synthesized by using a sonochemical method10.1039/C1CE05733B ↗
27. Enhanced efficiency of dye-sensitized solar cells based on Mg and La co-doped TiO2 photoanodes10.1016/j.electacta.2015.07.172 ↗
28. Synthesis of Sn doped ZnO/TiO2 nanocomposite film and their application to H2 gas sensing properties10.1016/j.mssp.2013.02.003 ↗
29. Evaluation of surface energy state distribution and bulk defect concentration in DSSC photoanodes based on Sn, Fe, and Cu doped TiO210.1016/j.apsusc.2015.06.015 ↗
30. Synthesis, characterization and photocatalytic activity of different metal-doped titania systems10.1016/j.apcata.2006.03.046 ↗
31. Blue shift in absorption edge and widening of band gap of ZnO by Al doping and Al–N co-doping10.1016/j.jallcom.2015.05.060 ↗
32. Effect of boron doping on the structural, optical and electrical properties of ZnO nanoparticles produced by the hydrothermal method10.1016/j.ceramint.2015.05.069 ↗
33. Influence of doping concentration on the properties of ZnO:Mn thin films by sol–gel method10.1016/j.vacuum.2006.10.010 ↗
34. Band bending at free Pb(Zr,Ti)O3 surfaces analyzed by X-ray photoelectron spectroscopy10.1016/j.mseb.2013.02.007 ↗
35. Origin of the surface recombination centers in ZnO nanorods arrays by X-ray photoelectron spectroscopy10.1016/j.apsusc.2009.12.160 ↗
36. Importance of the band gap energy and flat band potential for application of modified TiO2 photoanodes in water photolysis10.1016/j.jpowsour.2007.10.082 ↗
37. Electron mobility and injection dynamics in mesoporous ZnO, SnO2, and TiO2 films used in dye-sensitized solar cells10.1021/nn201243y ↗
38. The nature of excess electrons in anatase and rutile from hybrid DFT and RPA10.1039/C4CP03981E ↗
39. Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications10.1021/cr0500535 ↗
40. Chemical capacitance of nanostructured semiconductors: its origin and significance for nanocomposite solar cells10.1039/b310907k ↗
41. Sn-doped TiO2 photoanode for dye-sensitized solar cells10.1021/jp212517k ↗
42. Charge transfer and storage in nanostructures10.1016/j.mser.2015.06.001 ↗
43. Electron transport and recombination in ZnO-based dye-sensitized solar cells10.1021/jp206698t ↗
44. Influence of surface disorder, oxygen defects and bandgap in TiO2 nanostructures on the photovoltaic properties of dye sensitized solar cells10.1016/j.solmat.2015.08.036 ↗
45. Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications10.1039/c3nr00476g ↗