Aqueous-solution-processed hybrid solar cells with good thermal and morphological stability
Source abstract
Abstract
Abstract To fabricate efficient solar cells, it is crucial to control the nanoscale morphology of the bulk-heterojunction (BHJ) film, in which the thermal and morphological stability is an important issue. In this article, aqueous-solution-processed hybrid photovoltaic devices from poly(1,4-naphthalene vinylene) (PNV) and CdTe nanocrystals (NCs) are fabricated and a power conversion efficiency (PCE) of 1.74% under AM1.5G illumination is achieved. Furthermore, we demonstrate the high thermal stability of hybrid solar cells by investigating the evolution of hybrid films with prolonged annealing time and elevated temperature. Thermal annealing is necessary for converting PNV precursor to PNV and removing the ligands on CdTe NCs, which leads to the improvement of device performance. In particular, the prolonged annealing time and elevated temperature do not lower the PCE, because the interconnected CdTe networks are highly rigid and thereby suppress the excess phase separation of PNV, which is one of the main issues determining the long-term stability of polymer-based photovoltaic devices. This advantage is considered to promote the development of hybrid solar cells from various aqueous-solution-processed polymers and NCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
2. Highly crystalline and low bandgap donor polymers for efficient polymer solar cells10.1002/adma.201103623 ↗
3. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
4. All-polymer photovoltaic devices of poly(3-(4-n-octyl)-phenylthiophene) from Grignard metathesis (GRIM) polymerization10.1021/ja9059359 ↗
5. Enhanced performance and stability of a polymer solar cell by incorporation of vertically aligned, cross-linked fullerene nanorods10.1002/anie.201103782 ↗
6. Hybrid nanorod-polymer solar cells10.1126/science.1069156 ↗
7. The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells10.1038/nmat2533 ↗
8. Employing end-functional polythiophene to control the morphology of nanocrystal–polymer composites in hybrid solar cells10.1021/ja0489184 ↗
9. Photovoltaic devices with a low bandgap polymer and CdSe nanostructures exceeding 3% efficiency10.1021/nl903406s ↗
10. Photoinduced charge transfer and efficient solar energy conversion in a blend of a red polyfluorene copolymer with CdSe nanoparticles10.1021/nl061085q ↗
11. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
12. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
13. Effects of annealing on the nanomorphology and performance of poly(alkylthiophene): fullerene bulk-heterojunction solar cells10.1002/adfm.200601038 ↗
14. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene10.1063/1.1861123 ↗
15. Binary organic photovoltaic blends: a simple rationale for optimum compositions10.1002/adma.200800963 ↗
16. Amphiphilic diblock copolymer compatibilizers and their effect on the morphology and performance of polythiophene: fullerene solar cells10.1002/adma.200501787 ↗
17. Enhancing the thermal stability of polythiophene: fullerene solar cells by decreasing effective polymer regioregularity10.1021/ja064434r ↗
18. Toward stabilization of domains in polymer bulk-heterojunction films10.1021/cm1018184 ↗
19. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
20. Stabilizing bicontinuous nanophase segregation in πCP–C60 donor-acceptor blends10.1021/ja802021z ↗
21. A simple and effective way of achieving highly efficient and thermally stable bulk-heterojunction polymer solar cells using amorphous fullerene derivatives as electron acceptor10.1021/cm9009282 ↗
22. Significant improvement of polymer solar cell stability10.1021/cm051320q ↗
23. Bandgap aligned conducting interface modifier enhances the performance of thermal stable polymer–TiO2 nanorod solar cell10.1063/1.3357425 ↗
24. Charge separation and transport in conjugated-polymer/semiconductor-nanocrystal composites studied by photoluminescence quenching and photoconductivity10.1103/PhysRevB.54.17628 ↗
25. A large interconnecting network within hybrid MEH–PPV/TiO2 nanorod photovoltaic devices10.1088/0957-4484/17/21/017 ↗
26. Photo-induced charge transfer and relaxat ion of persistent charge carriers in polymer/nanocrystal composites for applications in hybrid solar cells10.1002/adfm.200900852 ↗
27. The effect of nanoparticle shape on the photocarrier dynamics and photovoltaic device performance of poly(3-hexylthiophene):CdSe nanoparticle bulk-heterojunction solar cells10.1002/adfm.201000628 ↗
28. Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer10.1002/adma.200306659 ↗
29. Performance enhancement of hybrid solar cells through chemical vapor annealing10.1021/nl904095n ↗
30. Covalent layer-by-layer assembly of conjugated polymers and CdSe nanoparticles: multilayer structure and photovoltaic properties10.1002/adfm.200500334 ↗
31. Self-organization of nanocrystals in polymer brushes. application in heterojunction photovoltaic diodes10.1021/nl0505039 ↗
32. Direct synthesis of CdSe nanoparticles in poly(3-hexylthiophene)10.1021/ja9067673 ↗
33. Direct growth of metal sulfide nanoparticle networks in solid-state polymer films for hybrid inorganic–organic solar cells10.1002/adma.201100625 ↗
34. Highly efficient multiple exciton generation in colloidal PbSe and PbS quantum dots10.1021/nl0502672 ↗
35. Hybrid polymer/zinc oxide photovoltaic devices with vertically oriented ZnO nanorods and an amphiphilic molecular interface layer10.1021/jp0571372 ↗
36. Band-offset engineering for enhanced open-circuit voltage in polymer–oxide hybrid solar cells10.1002/adfm.200600215 ↗
37. Efficient heterojunction photovoltaic cell utilizing nanocomposites of lead sulfide nanocrystals and a low-bandgap polymer10.1002/adma.201101912 ↗
38. Assembly of poly(3-hexylthiophene)–CdSe hybrid nanowires by cocrystallization10.1021/ma2003807 ↗
39. Applications of hybrid organic–inorganic nanocomposites10.1039/b509097k ↗
40. Improved efficiency of hybrid solar cells based on non-ligand-exchanged CdSe quantum dots and poly(3-hexylthiophene)10.1063/1.3280370 ↗
41. Effects of molecular interface modification in hybrid organic–inorganic photovoltaic cells10.1063/1.2737977 ↗
42. Hybrid solar cells from P3HT and silicon nanocrystals10.1021/nl8034338 ↗
43. Efficiency enhanced hybrid solar cells using a blend of quantum dots and nanorods10.1002/adfm.201101809 ↗
44. Enhanced performance and air stability of 3.2% hybrid solar cells: how the functional polymer and CdTe nanostructure boost the solar cell efficiency10.1002/adma.201102775 ↗
45. Organic/inorganic polymer solar cells using a buffer layer from all-water-solution processing10.1021/jp7115615 ↗
46. Organic solar cells from water-soluble poly(thiophene)–fullerene heterojunction10.1063/1.2711707 ↗
47. Characteristics of water-soluble polythiophene: TiO2 composite and its application in photovoltaics
48. Water-soluble polythiophene/nanocrystalline TiO2 solar cells10.1063/1.1900300 ↗
49. Fabrication of polymer solar cells using aqueous processing for all layers including the metal back electrode10.1002/aenm.201000007 ↗
50. Photovoltaic cells based on sequentially adsorbed multilayers of conjugated poly(p-phenylene ethynylenes) and a water-soluble fullerene derivative10.1021/la050599m ↗
51. Efficient polymer–nanocrystal hybrid solar cells fabricated from aqueous materials10.1039/c1ee01485d ↗
52. Generation of native polythiophene–PCBM composite nanoparticles via the combination of ultrasonic micronization of droplets and thermocleaving from aqueous dispersion10.1088/0957-4484/22/47/475301 ↗
53. All-water-solution processed solar cells based on PPV and TiO2 nanocrystals10.1016/j.solmat.2012.04.024 ↗
54. Achieving high open-circuit voltage in the PPV–CdHgTe bilayer photovoltaic devices on the basis of the heterojunction interfacial modification10.1039/c2jm30726j ↗
55. Z. Chen, H. Zhang, W. Yu, Z. Li, J. Hou, H. Wei, B. Yang, Inverted hybrid solar cells from aqueous materials with a PCE of 3.61%, Advanced Energy Materials doi:10.1002/aenm.201200741.10.1002/aenm.201200741 ↗
56. Aqueous processing of low-bandgap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
57. Stability of polymer solar cells10.1002/adma.201104187 ↗
58. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
59. Preparation and electrical conductivity of poly(1,4-naphthalene vinylene)10.1002/pol.1986.140241003 ↗
60. Chemical control of the photoluminescence of CdSe quantum dot-organic complexes with a series of para-substituted aniline ligands10.1021/ja907253s ↗