journal article·2019-12

Air exposure oxidation and photooxidation of solution-phase treated PbS quantum dot thin films and solar cells

Hossein Beygi, Seyed Abdolkarim Sajjadi, Abolfazl Babakhani, Jeff F. Young, Frank C.J.M. van Veggel

Publisher page

Abstract

Abstract The air exposure oxidation mechanisms of PbS quantum dot (QD) thin films and solar cells are studied in the current paper. As a novel and advantageous method, QD thin films were prepared by the single-step deposition of colloidal QDs treated with different ligands of butylamine (BA), mercaptopropionic acid (MPA), tetrabutylammonium iodide (TBAI), methylammonium iodide (MAI) and methylammonium lead triiodide (MAPbI3, perovskite). Photoluminescence (PL) measurements evaluated the stability of different surface treated PbS QDs during the colloidal to thin film transformation, and over the air exposure times. Blue-shift and quenching the PL spectra suggested rapid oxidation of QD thin films at the first times of air exposure. However, the oxidation rates significantly reduced for the QD thin films treated with organic MPA and all the inorganic ligands. According to the X-ray photoelectron spectroscopy (XPS) studies, thin films oxidation accompanied with the formation of PbSO3 and PbSO4 compounds on the (100) facets of PbS QDs. Although MAPbI3 treatment led to the complete passivation of QDs in the air, perovskite shelling partially oxidized to PbO and PbCO3 compounds. Furthermore, the PL enhancement phenomenon observed at the first times of air exposure for the TBAI and MAPbI3-treated QD thin films, as a result of their strong surface passivation as well as the photoenhancement and photoelectrification mechanisms. Eventually, p-n and p-i-n structured solar cells were fabricated by the single-step deposition of solution-phase treated PbS QD inks. In this case, inorganic surface treatments not only increased the power conversion efficiency (PCE) of solar cells, but also led to a high stability of fabricated devices in the air environment (lower than 1% PCE loss after 500 h of storage in the air).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Solution-processed semiconductors for next-generation photodetectors10.1038/natrevmats.2016.100 ↗
2. Building devices from colloidal quantum dots10.1126/science.aac5523 ↗
3. Enhanced mobility CsPbI3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells10.1126/sciadv.aao4204 ↗
4. “Darker-than-Black” PbS quantum dots: enhancing optical absorption of colloidal semiconductor nanocrystals via short conjugated ligands10.1021/ja510739q ↗
5. Peak external photocurrent quantum efficiency exceeding 100% via MEG in a quantum dot solar cell10.1126/science.1209845 ↗
6. Hybrid organic-inorganic inks flatten the energy landscape in colloidal quantum dot solids10.1038/nmat4800 ↗
7. Infrared colloidal quantum dots for photovoltaics: fundamentals and recent progress10.1002/adma.201001491 ↗
8. Colloidal quantum dot solar cells10.1021/acs.chemrev.5b00063 ↗
9. Solution phase surface functionalization of PbS nanoparticles with organic ligands for single-step deposition of p-type layer of quantum dot solar cells10.1016/j.apsusc.2018.08.056 ↗
10. Fabrication of efficient PbS colloidal quantum dot solar cell with low temperature sputter-deposited ZnO electron transport layer10.1016/j.solmat.2017.05.026 ↗
11. Colloidal quantum dot ligand engineering for high performance solar cells10.1039/C5EE03887A ↗
12. Colloidal quantum dot photovoltaics: a path forward10.1021/nn203438u ↗
13. Imbalanced charge carrier mobility and Schottky junction induced anomalous current-voltage characteristics of excitonic PbS colloidal quantum dot solar cells10.1016/j.solmat.2016.06.012 ↗
14. Effect of air exposure on surface properties, electronic structure, and carrier relaxation in PbSe nanocrystals10.1021/nn100131w ↗
15. Stability study of PbSe semiconductor nanocrystals over concentration, size, atmosphere, and light exposure10.1021/la9015614 ↗
16. Improved stability of depletion heterojunction solar cells employing cation-exchange PbS quantum dots10.1016/j.solmat.2017.02.006 ↗
17. Reduction of moisture sensitivity of PbS quantum dot solar cells by incorporation of reduced graphene oxide10.1016/j.solmat.2018.04.005 ↗
18. Impact of different surface ligands on the optical properties of PbS quantum dot solids10.3390/ma8041858 ↗
19. Colloidal-quantum-dot photovoltaics using atomic-ligand passivation10.1038/nmat3118 ↗
20. Dependence of carrier mobility on nanocrystal size and ligand length in PbSe nanocrystal solids10.1021/nl101284k ↗
21. Temperature- and ligand-dependent carrier transport dynamics in photovoltaic PbS colloidal quantum dot thin films using diffusion-wave methods10.1016/j.solmat.2017.02.024 ↗
22. Structural, optical, and electrical properties of PbSe nanocrystal solids treated thermally or with simple amines10.1021/ja800040c ↗
23. Structural, optical, and electrical properties of self-assembled films of PbSe nanocrystals treated with 1, 2-ethanedithiol10.1021/nn7003348 ↗
24. 10.6% certified colloidal quantum dot solar cells via solvent-polarity-engineered halide passivation10.1021/acs.nanolett.6b01957 ↗
25. Counterion-mediated ligand exchange for PbS colloidal quantum dot superlattices10.1021/acsnano.5b04547 ↗
26. Ultrastable PbSe nanocrystal quantum dots via in situ formation of atomically thin halide adlayers on PbSe (100)10.1021/ja503957r ↗
27. Hybrid passivated colloidal quantum dot solids10.1038/nnano.2012.127 ↗
28. Halide, hybrid and perovskite functionalized light absorbing quantum materials of p-i-n heterojunction solar cells10.1021/acsami.8b06967 ↗
29. A charge-orbital balance picture of doping in colloidal quantum dot solids10.1021/nn303364d ↗
30. Energy level modification in lead sulfide quantum dot thin films through ligand exchange10.1021/nn500897c ↗
31. The photothermal stability of PbS quantum dot solids10.1021/nn2033117 ↗
32. p-Type PbSe and PbS quantum dot solids prepared with short-chain acids and diacids10.1021/nn100339b ↗
33. Surface chemistry of as-synthesized and air-oxidized PbS quantum dots10.1016/j.apsusc.2018.06.152 ↗
34. Photostability of colloidal PbSe and PbSe/PbS core/shell nanocrystals in solution and in the solid state10.1021/jp0648083 ↗
35. Surface chemistry of colloidal PbSe nanocrystals10.1021/ja803994m ↗
36. Ligand effects on synthesis and post-synthetic stability of PbSe nanocrystals10.1021/jp102660g ↗
37. Effect of halide treatments on PbSe quantum dot thin films: stability, hot carrier lifetime, and application to photovoltaics10.1021/acs.jpcc.5b08021 ↗
38. Air-stable n-type colloidal quantum dot solids10.1038/nmat4007 ↗
39. Colloidal quantum dot photovoltaics enhanced by perovskite shelling10.1021/acs.nanolett.5b03271 ↗
40. Directly deposited quantum dot solids using a colloidally stable nanoparticle ink10.1002/adma.201302147 ↗
41. Solar cells based on inks of n-type colloidal quantum dots10.1021/nn503569p ↗
42. Inorganic halogen ligands in quantum dots: I−, Br−, Cl− and film fabrication through electrophoretic deposition10.1039/c3cp52678j ↗
43. Supersonically spray-coated colloidal quantum dot ink solar cells10.1038/s41598-017-00669-9 ↗
44. All‐inorganic colloidal quantum dot photovoltaics employing solution‐phase halide passivation10.1002/adma.201202942 ↗
45. One-step deposition of photovoltaic layers using iodide terminated PbS quantum dots10.1021/jz502092x ↗
46. The evolution of silicon wafer cleaning technology
47. An improved experimental determination of external photoluminescence quantum efficiency10.1002/adma.19970090308 ↗
48. Colloidally prepared 3-mercaptopropionic acid capped lead sulfide quantum dots10.1021/acs.chemmater.5b02786 ↗
49. Resonant energy transfer in PbS quantum dots10.1021/jp0713561 ↗
50. Single-step fabrication of quantum funnels via centrifugal colloidal casting of nanoparticle films10.1038/ncomms8772 ↗
51. Photoluminescence enhancement in thin films of PbSe nanocrystals10.1063/1.2989131 ↗
52. Surface properties of nanocrystalline PbS films deposited at the water–oil interface: a study of atmospheric aging10.1021/la504779h ↗
53. Quantum dot photovoltaics in the extreme quantum confinement regime: the surface-chemical origins of exceptional air- and light-stability10.1021/nn901564q ↗
54. Electron spectroscopy for chemical analysis studies of lead sulfide oxidation10.1021/j100507a008 ↗
55. Understanding surface chemistry during MAPbI 3 spray deposition and its effect on photovoltaic performance10.1039/C6TC04864A ↗
56. Evolution of chemical composition, morphology, and photovoltaic efficiency of CH3NH3PbI3 perovskite under ambient conditions10.1021/acs.chemmater.5b04122 ↗
57. Formation chemistry of perovskites with mixed iodide/chloride content and the implications on charge transport properties10.1039/C4TA05819D ↗
58. Instability in CH 3 NH 3 PbI 3 perovskite solar cells due to elemental migration and chemical composition changes10.1038/s41598-017-15841-4 ↗
59. Colloidal arenethiolate-capped PbS quantum dots: optoelectronic properties, self-assembly, and application in solution-cast photovoltaics10.1021/jp403066q ↗