Polymer solar cells spray coated with non-halogenated solvents
Source abstract
Abstract
Using spray-coating technique, we successfully fabricated conventional ITO-based and inverted ITO-free polymer solar cells (PSCs) based on a conjugated polymer poly[2,3-bis-(3-octyloxyphenyl) quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1) as the donor and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) or [6,6] -phenyl-C71-butyric acid methyl ester (PC71BM) as the acceptor. Environment-friendly non-halogenated solvents were used to process the active layers. The influence of substrate temperatures and processing solvents on the photovoltaic performance of the ITO-based TQ1:PC61BM PSCs was systemically investigated. A higher substrate temperature can accelerate the solvent evaporating rate and afford a micro-textured rougher surface, which efficiently reduced light reflectance and enhanced absorption. Furthermore, finer phase separation was observed when using this high substrate temperature, which led to enhanced photocurrent due to the reduced bimolecular recombination. The device performance of spray-processed PSCs using the non-halogenated solvent mixtures was comparable to that of spray-processed PSCs using the halogenated o-dichlorobenzene (oDCB), which demonstrates that the non-halogenated solvents are very promising in spray-processed PSCs. This work sheds new light on developing efficient roll-to-roll compatible spray-coated PSCs with environment-friendly solvents.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
2. 25th anniversary article: rise to power - OPV-based solar parks10.1002/adma.201302031 ↗
3. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
4. Polymer solar cells10.1038/nphoton.2012.11 ↗
5. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
6. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
7. Polymer homo-tandem solar cells with best efficiency of 11.3%10.1002/adma.201404220 ↗
8. C.N. Hoth, P. Schilinsky, S.A. Choulis, S. Balasubramanian, C.J. Brabec, Solution-Processed Organic Photovoltaics, 2013, pp. 27–5610.1007/978-1-4614-3160-2_2 ↗
9. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
10. From spin coating to doctor blading A systematic study on the photovoltaic performance of an isoindigo-based polymer10.1016/j.solmat.2014.08.039 ↗
11. Fabrication of bulk heterojunction plastic solar cells by screen printing10.1063/1.1413501 ↗
12. Airbrush spray-coating of polymer bulk-heterojunction solar cells10.1016/j.solmat.2011.01.047 ↗
13. Ultrasonic spray coating of 6.5% efficient diketopyrrolopyrrole-based organic photovoltaics10.1109/JPHOTOV.2014.2352153 ↗
14. Spray-coated organic solar cells with large-area of 12.25 cm(2)10.1016/j.solmat.2010.10.033 ↗
15. Spray coated indium-tin-oxide-free organic photodiodes with PEDOT:PSS anodes10.1063/1.4899044 ↗
16. Improvement of photovoltaic performance by ternary blending of amorphous and semi-crystalline polymer analogues with PCBM10.1039/c3ta01070h ↗
17. Vertical and lateral morphology effects on solar cell performance for a thiophene–quinoxaline copolymer:PC70BM blend10.1039/C5TA00683J ↗
18. Mixed solvents for reproducible photovoltaic bulk heterojunctions10.1117/1.3606393 ↗
19. Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer–fullerene solar cells10.1016/j.solmat.2011.09.059 ↗
20. Halogen-free solvent processing for sustainable development of high efficiency organic solar cells10.1016/j.orgel.2012.08.026 ↗
21. High performance bulk-heterojunction organic solar cells fabricated with non-halogenated solvent processing10.1016/j.orgel.2011.05.020 ↗
22. 8.7% Power conversion efficiency polymer solar cell realized with non-chlorinated solvents10.1016/j.solmat.2014.11.042 ↗
23. High-efficiency polymer solar cells with a cost-effective quinoxaline polymer through nanoscale morphology control induced by practical processing additives10.1039/c3ee00110e ↗
24. An easily synthesized blue polymer for high-performance polymer solar cells10.1002/adma.201002225 ↗
25. High-performance organic solar cells based on a low-bandgap poly-thienothiophene-benzodithiophene polymer and fullerene composite prepared by using the airbrush spray-coating technique10.3938/jkps.62.1169 ↗
26. Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
27. Characterization of spray-coating methods for conjugated polymer blend thin films10.1007/s10853-014-8123-5 ↗
28. Control of doctor-blade coated poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) electrodes shape on prepatterned substrates via microflow control in a drying droplet10.1002/polb.22347 ↗
29. Vertically segregated polymer-blend photovoltaic thin-film structures through surface-mediated solution processing10.1063/1.1456550 ↗
30. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
31. Effect of solvent annealing on the crystallinity of spray coated ternary blend films prepared using low boiling point solvents10.1016/j.cep.2014.03.007 ↗
32. Morphological and topographical characterizations in spray coated organic solar cells using an additional solvent spray deposition10.1016/j.orgel.2011.09.009 ↗
33. Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution10.1039/C5EE01917F ↗
34. Effect of solvent on large-area polymer–fullerene solar cells fabricated by a slot-die coating method10.1016/j.solmat.2014.03.042 ↗
35. Effect of in situ annealing on the performance of spray coated polymer solar cells10.1016/j.solmat.2013.01.011 ↗
36. Side chain modification: an effective approach to modulate the energy level of benzodithiophene based polymers for high-performance solar cells10.1039/C5TA05096K ↗
37. Enhanced performance of polymer:fullerene bulk heterojunction solar cells upon graphene addition10.1063/1.4893777 ↗
38. Efficiency enhancement in solution-processed organic small molecule: fullerene solar cells via solvent vapor annealing10.1063/1.4919707 ↗
39. Transient optoelectronic analysis of charge carrier losses in a selenophene/fullerene blend solar cell10.1021/jp109697w ↗
40. Reducing burn-in voltage loss in polymer solar cells by increasing the polymer crystallinity10.1039/C4EE01842G ↗
41. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
42. Facile external treatment for efficient nanoscale morphology control of polymer solar cells using a gas-assisted spray method10.1039/c0jm03899g ↗
43. Performance optimization of polymer solar cells using electrostatically sprayed photoactive layers10.1002/adfm.201000433 ↗