Interfacial modification of the electron collecting layer of low-temperature solution-processed organometallic halide photovoltaic cells using an amorphous perylenediimide
Source abstract
Abstract
Abstract The efficiency of organometallic halide photovoltaic cells can be improved by interfacial modification of the titanium oxide (TiOx) electron collecting layer by a thin layer of an organic material. Enhancements of power conversion efficiency up to 37% were obtained with PC61BM, but the performance is highly dependent on processing conditions and PCBM is still an expensive material. Herein, a glass-forming perylenetetracarboxylicdiimide derivative (PDI-glass) was used as interface material. The devices were optimized with varying PDI-glass thickness. With an optimal 10 nm-thickness, a power conversion efficiency increase of 39% were obtained, with an increase in short-circuit current from 9.7 to 11.05 mA cm−2 and fill factor from 0.51 to 0.61. Aside from the thickness of the PDI-glass layer, the process yields consistent results independent of the processing conditions. Photoluminescence spectra revealed the presence of charge transfer at the PDI-glass – active layer interface. The films were further studied by X-ray diffraction (XRD), atomic force microscopy (AFM), and scanning electron microscopy (SEM).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Planar heterojunction perovskite solar cells with superior reproducibility10.1038/srep06953 ↗
2. Nanocrystalline rutile electron extraction layer enables low-temperature solution processed perovskite photovoltaics with 13.7% efficiency10.1021/nl500399m ↗
3. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
4. Efficient planar-heterojunction perovskite solar cells achieved via interfacial modification of a sol–gel ZnO electron collection layer10.1039/C4TA03954H ↗
5. High-performance perovskite-polymer hybrid solar cells via electronic coupling with fullerene monolayers10.1021/nl401044q ↗
6. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
7. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis base adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
8. Improved high-efficiency perovskite planar heterojunction solar cells via incorporation of a polyelectrolyte interlayer10.1021/cm502864s ↗
9. Inverted bulk-heterojunction organic solar cell using chemical bath deposited titanium oxide as electron collection layer10.1016/j.orgel.2010.04.008 ↗
10. Degradation mechanism for planar heterojunction perovskite solar cells10.7567/JJAP.55.04ES07 ↗
11. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
12. Enhanced photovoltaic performance of perovskite solar cells via modification of surface characteristics using a fullerene interlayer10.1246/cl.150814 ↗
13. Anarchy in the solid state: structural dependence on glass-forming ability in triazine-based molecular glasses10.1016/j.tet.2009.07.026 ↗
14. Disperse and disordered: a mexylaminotriazine-substituted azobenzene derivative with superior glass and surface relief grating formation10.1039/C3TC32034K ↗
15. Synthesis, characterization and photovoltaic performance of novel glass forming perylenediimide derivatives10.1016/j.orgel.2016.04.025 ↗
16. Perylene diimides based materials for organic solar cells10.1016/j.dyepig.2013.01.020 ↗
17. Optical properties of perylene-monoimide (PMI) and perylene-diimide (PDI) organic semiconductor thin films10.1016/j.synthmet.2014.05.003 ↗
18. Inverted bulk-heterojunction organic solar cell using chemical bath deposited titanium oxide as electron collection layer10.1016/j.orgel.2010.04.008 ↗
19. Study of planar heterojunction perovskite photovoltaic cells using compact titanium oxide by chemical bath deposition10.7567/JJAP.54.08KF02 ↗
20. Organolead halide perovskite: new horizons in solar cell research10.1021/jp409025w ↗
21. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
22. Light-activated photocurrent degradation and self-healing in perovskite solar cells10.1038/ncomms11574 ↗
23. Steady state performance, photo-induced performance degradation and their relation to transient hysteresis in perovskite solar cells10.1016/j.jpowsour.2016.01.094 ↗
24. Large-scale aligned crystalline CH3NH3PbI3 perovskite array films10.1039/C5TA04936A ↗
25. 〈www.gwyddion.net〉.