Computational comparison of conventional and inverted organic photovoltaic performance parameters with varying metal electrode surface workfunction
Source abstract
Abstract
Inverted polymer-based bulk-heterojunction organic photovoltaic (BHJ-OPV) device designs have enabled a breakthrough in operational lifetime through use of stable electrode materials. To date, there have not been systematic performance parameter comparisons between conventional and inverted devices that consider a range of different metal electrodes and presence of native metal oxides at the organic-metal interface. Here, we systematically compute optical and electronic performance parameters for both conventional and inverted BHJ-OPV devices for 15 different electrode types covering a range of workfunctions. We quantitatively demonstrate that (1) high-workfunction metal electrodes (Au, Pd, Ni) are ideal for high-efficiency inverted device performance; and (2) native metal oxide on metal electrodes (e.g., CuO/Cu, Ag2O/Ag, NiO/Ni), which dramatically reduce conventional device efficiencies, can result in highly efficient inverted BHJ-OPV devices (efficiency of up to 6.7% for the P3HT:PCBM system). This work is an important advance over prior studies as it predicts the electrode materials and configurations that can lead to both high efficiency and high stability BHJ-OPV devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Impact of contact evolution on the shelf life of organic solar cells10.1039/b910213b ↗
2. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
3. Effect of zinc oxide electron transport layers on performance and shelf life of organic bulk heterojunction devices10.1021/jp203539k ↗
4. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
5. Stability of polymer solar cells10.1002/adma.201104187 ↗
6. Enhancement of hole injection using O2 plasma-treated Ag anode for top-emitting organic light-emitting diodes10.1063/1.1846149 ↗
7. J.B. Kim, C.S. Kim, Y.S. Kim and Y.-L. Loo, Oxidation of silver electrodes induces transition from conventional to inverted photovoltaic characteristics in polymer solar cells, Appl. Phys. Lett. 95, 2009, 183301-1-183301-310.1063/1.3257361 ↗
8. Phase-controllable copper oxides for an efficient anode interfacial layer in organic light-emitting diodes10.1039/C1JM14218F ↗
9. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
10. Polymer solar cells: Recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
11. How to model the behaviour of organic photovoltaic cells10.1002/pi.2038 ↗
12. Design rules for donors in bulk-heterojunction solar cells – towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
13. Strategies for increasing the efficiency of heterojunction organic solar cells: material selection and device architecture10.1021/ar9000923 ↗
14. Organic solar cells using inverted layer sequence10.1016/j.tsf.2005.06.006 ↗
15. Recent development of the inverted configuration organic solar cells10.1016/j.solmat.2011.02.002 ↗
16. Optimization of active layer and anode electrode for high-performance inverted bulk-heterojunction solar cells10.1109/JSTQE.2010.2047098 ↗
17. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
18. Interface modification for highly efficient organic photovoltaics10.1063/1.2885724 ↗
19. Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer10.1063/1.2918983 ↗
20. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
21. An inverted polymer photovoltaic cell with increased air stability obtained by employing novel hole/electron collecting layers10.1039/b815523b ↗
22. Polymeric anodes for improved polymer light-emitting diode performance10.1063/1.118953 ↗
23. Polymeric anodes for organic light-emitting diodes,10.1016/S0379-6779(97)80207-X ↗
24. Photoelectron spectroscopy of thin films of PEDOT–PSS conjugated polymer blend: a mini-review and some new results10.1016/S0368-2048(01)00323-1 ↗
25. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
26. Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods10.1016/j.orgel.2009.05.017 ↗
27. Efficiency enhancement of polymer photovoltaic devices hybridized with ZnO nanorod arrays by the introduction of a vanadium oxide buffer layer10.1063/1.2972113 ↗
28. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
29. An inverted organic solar cell with an ultrathin Ca electron-transporting layer and MoO3 hole-transporting layer10.1063/1.3250176 ↗
30. An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
31. Inverted ITO-free organic solar cells based on p and n semiconducting oxides. New designs for integration in tandem cells, top or bottom detecting devices, and photovoltaic windows10.1039/C0EE00318B ↗
32. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
33. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
34. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
35. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
36. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
37. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
38. Electrode considerations for the optical enhancement of organic bulk heterojunction solar cells10.1002/aenm.201100250 ↗
39. Influence of metal cathode for organic photovoltaic device performance10.1016/j.synthmet.2009.05.036 ↗
40. Optimal negative electrodes for poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices10.1063/1.2841067 ↗
41. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
42. Limits of open circuit voltage in organic photovoltaic devices10.1063/1.3360336 ↗
43. Light management in PCPDTBT:PC70BM solar cells: A comparison of standard and inverted device structures10.1016/j.orgel.2011.12.019 ↗
44. High-performance inverted polymer solar cells: device characterization, optical modeling, and hole-transporting modifications10.1002/adfm.201102937 ↗
45. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
46. Inverted organic photovoltaic devices with high efficiency and stability based on metal oxide charge extraction layers10.1039/C0JM03048A ↗
47. Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells
48. Device physics of polymer: fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
49. Practical efficiency limits in organic photovoltaic cells: functional dependence of fill factor and external quantum efficiency10.1063/1.3243986 ↗
50. Modeling the optical absorption within conjugated polymer/fullerene-based bulk-heterojunction organic solar cells10.1016/S0927-0248(03)00137-5 ↗
51. Modeling the short-circuit current density of polymer solar cells based on P3HT:PCBM blend10.1016/j.solmat.2006.10.019 ↗
52. Accounting for interference, scattering, and electrode absorption to make accurate internal quantum efficiency measurements in organic and other thin solar cells10.1002/adma.201000883 ↗
53. Optimization of thickness and morphology of active layer for high performance of bulk-heterojunction organic solar cells10.1016/j.solmat.2010.02.041 ↗
54. Optical interference for the matching of the external and internal quantum efficiencies in organic photovoltaic cells10.1016/j.solmat.2012.04.047 ↗
55. Enhancement of photovoltaic characteristics using a PEDOT interlayer in TiO2/MEH-PPV heterojunction devices
56. Development of air stable polymer solar cells using an inverted gold on top anode structure10.1016/j.tsf.2004.10.018 ↗
57. Effect of atmospheres on the open-circuit photovoltage of nanoporous TiO2/poly(3-hexylthiophene) heterojunction solar cell10.1016/j.tsf.2004.12.056 ↗
58. Energy-level alignment at organic/metal and organic/organic interfaces10.1002/adma.200802893 ↗
59. Molecular level alignment at organic semiconductor-metal interfaces10.1063/1.121940 ↗
60. Bright blue organic light-emitting diode with improved color purity using a LiF/Al cathode10.1063/1.368299 ↗
61. The work function of the elements and its periodicity10.1063/1.323539 ↗
62. Stability / instability of conductivity and work function changes of ITO thin films, UV-irradiated in air or vacuum. Measurements by the four-probe method and by Kelvin force microscopy10.1016/S0379-6779(00)01337-0 ↗
63. Electrical and optical properties of reactive DC magnetron sputtered silver oxide thin films: role of oxygen10.1016/S0040-6090(03)00064-6 ↗
64. Inverted top-emitting organic light-emitting diodes using transparent silver oxide anode formed by oxygen plasma10.1149/1.2817479 ↗
65. Roughness characterization of silver oxide anodes for use in efficient top-illuminated organic solar cells10.1016/j.solmat.2011.05.008 ↗
66. A photoelectrochemical determination of the position of the conduction and valence band edges of p-type CuO10.1063/1.330567 ↗
67. Effects of silica additions on H2S sensing properties of CuO–SnO2 sensors10.1016/S0925-4005(99)00006-4 ↗
68. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
69. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
70. MoO3 modified Ag anode for top-emitting organic light-emitting devices10.1063/1.2408647 ↗
71. Toward high performance inverted polymer solar cells10.1016/j.polymer.2012.09.023 ↗
72. Electrodeposited ZnO/Cu2O heterojunction solar cells10.1016/j.electacta.2007.09.030 ↗
73. Enhanced performance in polymer solar cells by surface energy control10.1002/adfm.201000960 ↗
74. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
75. Interface formation between ZnO nanorod arrays and polymers (PCBM and P3HT) for organic solar cells10.1021/jp3081468 ↗
76. Ultrathin TiO2 films on ZnO electron-collecting layers of inverted organic solar cell10.1021/jp2063589 ↗
77. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
78. Material and device concepts for organic photovoltaics: towards competitive efficiencies10.1016/j.tsf.2003.11.043 ↗
79. Inverted structure organic photovoltaic devices employing a low temperature solution processed WO3 anode buffer layer10.1016/j.orgel.2012.06.045 ↗
80. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
81. Improvement of ITO-free inverted polymer-based solar cells by using colloidal zinc oxide nanocrystals as electron-selective buffer layer10.1016/j.orgel.2012.07.026 ↗
82. A weak donor–strong acceptor strategy to design ideal polymers for organic solar cells10.1021/am1000344 ↗
83. Light in tiny holes10.1038/nature05350 ↗
84. Lowering of operational voltage of organic electroluminescent devices by coating indium-tin-oxide electrodes with a thin CuOx layer10.1063/1.1469697 ↗
85. 2.5% Efficient organic plastic solar cells10.1063/1.1345834 ↗
86. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
87. Enhancement of hole injection with an ultra-thin Ag2O modified anode in organic light-emitting diodes10.1016/j.mejo.2004.11.006 ↗
88. Hole Injection Layer of Thermally evaporated copper oxide for top emitting organic light emitting diodes10.1149/1.3476308 ↗
89. Enhanced hole injections in organic light-emitting devices by depositing nickel oxide on indium tin oxide anode10.1063/1.1505112 ↗
90. Improved performance of the single-layer and double-layer organic light emitting diodes by nickel oxide coated indium tin oxide anode10.1016/j.tsf.2003.10.022 ↗
91. C.-W. Chen, P.-Y. Hsieh, H.-H. Chiang, C.-L. Lin, H.-M. Wu and C.-C. Wu, Top-emitting organic light-emitting devices using surface-modified Ag anode, Appl. Phys. Lett. 83, 2003, 5127-512910.1063/1.1635076 ↗
92. Sol–gel processed CuOx thin film as an anode interlayer for inverted polymer solar cells10.1016/j.orgel.2010.08.009 ↗
93. Device lifetime improvement of polymer-based bulk heterojunction solar cells by incorporating copper oxide layer at Al cathode10.1063/1.3580629 ↗
94. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
95. All solution processing of ITO-free organic solar cell modules directly on barrier foil10.1016/j.solmat.2012.07.004 ↗
96. Offset energies at organic semiconductor heterojunctions and their influence on the open-circuit voltage of thin-film solar cells10.1103/PhysRevB.75.115327 ↗
97. Energy level alignment and interfacial electronic structures at organic/metal and organic/organic interfaces10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
98. Energy level alignment of poly(3-hexylthiophene): [6,6]-phenyl C61 butyric acid methyl ester bulk heterojunction10.1063/1.3163056 ↗
99. Fermi-level pinning at conjugated polymer interfaces10.1063/1.2168515 ↗
100. Accuracy of analytical expressions for solar cell fill factors10.1016/0379-6787(82)90057-6 ↗