journal article·2012-01

Polymer solar cells using chlorinated indium tin oxide electrodes with high work function as the anode

Kuan Sun, Jianyong Ouyang

Publisher page

Abstract

Abstract This paper reports polymer solar cells (PSCs) using chlorinated indium tin oxide (Cl-ITO) substrates with high work function as the anode. There is no conducting polymer buffer layer between the Cl-ITO anode and the active layer in these PSCs. PSCs with P3HT:PCBM (P3HT=poly(3-hexylthiophene), PCBM=[6,6]-phenyl-C61-butyric acid methyl ester) exhibited high photovoltaic performance, short-circuit current density (Jsc) of 9.91 mA/cm2, open-circuit voltage (Voc) of 0.57, fill factor (FF) of 0.69, and photovoltaic efficiency of 3.90% under AM1.5G illumination immediately after the device fabrication. The photovoltaic performance is comparable to that of normal PSCs with a conducting polymer buffer layer. But the photovoltaic efficiency of PSCs with Cl-ITO degrades quickly. The photovoltaic efficiency dropped to 3.43% and 3.24% just 10 and 20 min after the device fabrication, respectively. The reasons for the photovoltaic degradation were studied by ultraviolet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS). The work function of Cl-ITO decreases with time. The decrease in the work function of Cl-ITO is attributed to Cl desorption from the surface of ITO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Design Rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
2. A review of polymer multijunction solar cells10.1039/b926255p ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Low band gap polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
5. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot–die coating and rotary screen printing10.1039/c0jm01178a ↗
6. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
7. High-performance, flexible polymer light-emitting diodes fabricated by a continuous polymer coating process10.1002/1521-4095(20020618)14:12<915::AID-ADMA915>3.0.CO;2-9 ↗
8. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
9. Water-induced degradation of polymer solar cells studied by H2O18 labeling10.1021/am800039w ↗
10. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-c60 bisadduct by device optimization10.1002/adma.201001339 ↗
11. High-yield synthesis and electrochemical and photovoltaic properties of indene-C70 bisadduct10.1002/adfm.201001122 ↗
12. A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance10.1021/ar1000296 ↗
13. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
14. Phenanthrene-functionalized 3,6-dithiophen-2-yl-2,5- dihydropyrrolo [3,4–c]pyrrole-1,4-diones as donor molecules for solution-processed organic photovoltaic cells10.1016/j.solmat.2011.05.006 ↗
15. Low-band gap copolymers of ethynylfluorene and 3,6-dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione synthesized under microwave irradiation for polymer photovoltaic cells10.1016/j.orgel.2011.03.023 ↗
16. Organic molecules based on dithienyl-2,1,3-benzothiadiazole as new donor materials for solution-processed organic photovoltaic cells10.1016/j.solmat.2010.07.017 ↗
17. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
18. Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-Free organic solar cells10.1002/adfm.201002290 ↗
19. PEDOT:P.S.S. films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
20. Highly conductive PEDOT:PSS films prepared through a treatment with zwitterions and their application in polymer photovoltaic cells10.1039/c0jm01593h ↗
21. Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy10.1063/1.116313 ↗
22. Dependence of indium–tin-oxide work function on surface cleaning method as studied by ultraviolet and x-ray photoemission spectroscopies10.1063/1.371859 ↗
23. Electrochemical characterization of the solvent-enhanced conductivity of poly(3,4-ethylenedioxythiophene) and its application in polymer solar cells10.1039/b822729b ↗
24. High-efficiency hole extraction/electron-blocking layer to replace poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) in bulk-heterojunction polymer solar cells10.1063/1.2834697 ↗
25. Sulfonated poly(diphenylamine) as a novel hole-collecting layer in polymer photovoltaic cells10.1039/b807182a ↗
26. Performance improvement of polymer solar cells by using a solvent-treated poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) buffer layer10.1063/1.3600665 ↗
27. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
28. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
29. Combination of indene-C60 bis-adduct and cross-linked fullerence interlayer leading to highly efficient inverted polymer solar cells10.1021/ja108259n ↗
30. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
31. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
32. Insulator MnO: highly efficient and air-stable n-type doping layer for organic photovoltaic cells10.1016/j.orgel.2010.01.007 ↗
33. Controlling charge injection in organic electronic devices using self-assembled monolayers10.1063/1.120381 ↗
34. Organic electroluminescent devices: enhanced carrier injection using SAM derivatized ITO electrodes10.1039/a903708j ↗
35. Using self-assembling dipole molecules to improve hole injection in conjugated polymers10.1002/adfm.200400035 ↗
36. Control of the electrode work function and active layer morphology via surface modification of indium tin oxide for high efficiency organic photovoltaics10.1063/1.2778548 ↗
37. Interfacial modification to improve inverted polymer solar cells10.1039/b808004f ↗
38. High-efficiency inverted bulk heterojunction polymer solar cells with UV ozone-treated ultrathin aluminum interlayer10.1063/1.3479916 ↗
39. Inverted and transparent polymer solar cells prepared with vacuum-free processing10.1016/j.solmat.2008.11.002 ↗
40. High-performance inverted polymer solar cells with lead monoxide-modified indium tin oxides as the cathode10.1016/j.orgel.2011.07.023 ↗
41. Chlorinated indium tin oxide electrodes with high work function for organic device compatibility10.1126/science.1202992 ↗
42. Influence of indium–tin oxide surface structure on the ordering and coverage of carboxylic acid and thiol monolayers10.1088/0022-3727/40/14/016 ↗
43. Programmable polymer thin film and nonvolatile memory device10.1038/nmat1269 ↗