journal article·2023-09Open access

Revealing capacitive and inductive effects in modern industrial c-Si photovoltaic cells through impedance spectroscopy

David A. van Nijen, Mirco Muttillo, Rik Van Dyck, Jef Poortmans, Miro Zeman, Olindo Isabella, Patrizio Manganiello

Abstract

To achieve a high performance in sub-module power conditioning circuits, it is important that power converters are designed in accordance with the photovoltaic (PV) cell impedance at the input. Taking this one step further, exploiting the impedance of cell strings could even support novel power conditioning approaches in PV modules. In this work, we characterize the impedance of eight single-cell laminates based on different industrial c-Si PV cell architectures. This characterization is carried out by impedance spectroscopy in dark conditions at room temperature, and the capacitive and inductive effects are evaluated through equivalent model fitting. By comparing the results for the different laminates, it is revealed how the cell design affects its impedance. Our experiments show that the PN junction capacitance at maximum power point varies for the different cells between 0.30 and 45.6 μF/cm2. The two main factors contributing to a high PV cell capacitance at maximum power point are (i) a low wafer dopant concentration and (ii) a high maximum power point voltage. In high-efficiency c-Si PV cells that will be fabricated in the coming years, increasing capacitances are expected for operation near the maximum power point. Furthermore, the single-cell laminates exhibit inductances between 63 and 130 nH, and our results indicate that the inductance is mostly affected by the number of busbars and the geometry of the metal contacts.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Fraunhofer ISE · 2023
2. Photovoltatronics: intelligent PV-based devices for energy and information applications10.1039/D0EE02491K ↗
3. Characterization of power optimizer potential to increase energy capture in photovoltaic systems operating under nonuniform conditions10.1109/TPEL.2012.2226476 ↗
4. Simulation study of the electrical yield of various PV module topologies in partially shaded urban scenarios10.1016/j.solener.2021.07.061 ↗
5. Evaluation of maxim module-integrated electronics at the DOE regional test centers
6. Improvement of shade resilience in photovoltaic modules using buck converters in a smart module architecture
7. A resonant switched-capacitor IC and embedded system for sub-module photovoltaic power management10.1109/JSSC.2012.2225731 ↗
8. Impedance spectroscopy of crystalline silicon solar cell: Observation of negative capacitance10.1016/j.solener.2016.06.041 ↗
9. Capacitor-less photovoltaic cell-level power balancing using diffusion charge redistribution10.1109/TPEL.2014.2340403 ↗
10. Design of boost converter based on maximum power point resistance for photovoltaic applications10.1016/j.solener.2017.12.016 ↗
11. Exploring the benefits, challenges, and feasibility of integrating power electronics into c-si solar cells
12. An overview of lifetime management of power electronic converters10.1109/ACCESS.2022.3214320 ↗
13. Submodule integrated boost DC-DC converters with no external input capacitor or input inductor for low power photovoltaic applications
14. Impedance spectroscopy for emerging photovoltaics10.1021/acs.jpcc.9b00892 ↗
15. Measurement of solar cell parameters using impedance spectroscopy10.1016/0927-0248(95)00153-0 ↗
16. Facility to measure solar cell ac parameters using an impedance spectroscopy technique10.1063/1.1386632 ↗
17. Silicon (BSFR) solar cell AC parameters at different temperatures10.1016/j.solmat.2004.05.017 ↗
18. Study of silicon solar cell at different intensities of illumination and wavelengths using impedance spectroscopy10.1016/j.solmat.2009.07.002 ↗
19. Impedance spectroscopy characterisation of highly efficient silicon solar cells under different light illumination intensities10.1039/b812468j ↗
20. Electro-analytical characterization of photovoltaic cells by combining voltammetry and impedance spectroscopy: voltage dependent parameters of a silicon solar cell under controlled illumination and temperature10.1039/C0EE00307G ↗
21. Investigating the charge transport kinetics in poly-crystalline silicon solar cells for low-concentration illumination by impedance spectroscopy10.1016/j.solmat.2014.10.031 ↗
22. Admittance spectra of silicon photocells in dark mode10.1016/j.sna.2021.112909 ↗
23. Impedance spectroscopy characterization of c-Si solar cells with SiOx/ poly-Si rear passivating contacts10.1016/j.solmat.2022.112167 ↗
24. Characterization of silicon-based photovoltaic cells using broadband impedance spectroscopy10.1109/TIA.2018.2850025 ↗
25. Evaluation of impedance spectroscopy as a tool to characterize degradation mechanisms in silicon photovoltaics10.1016/j.solener.2019.03.088 ↗
26. Photovoltaic cell/module equivalent electric circuit modeling using impedance spectroscopy10.1109/TIA.2019.2958906 ↗
27. Impedance spectroscopy for diagnosis of photovoltaic modules under outdoor conditions10.1109/JPHOTOV.2022.3195003 ↗
28. The effect of capacitance on high-efficiency photovoltaic modules: a review of testing methods and related uncertainties10.1088/1361-6463/abe574 ↗
29. tools · 2022
30. Neamen · 2012
31. Capacitance measurements of p-n junctions: depletion layer and diffusion capacitance contributions10.1088/0143-0807/14/2/009 ↗
32. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
33. Comprehensive simulation study of industrially relevant silicon solar cell architectures for an optimal material parameter choice10.1002/pip.2790 ↗
34. High-efficiency silicon heterojunction solar cells: Materials, devices and applications10.1016/j.mser.2020.100579 ↗
35. Achieving 23.83% conversion efficiency in silicon heterojunction solar cell with ultra-thin MoOx hole collector layer via tailoring (i)a-Si: H/MoOx interface
36. Principles of carrier-selective contacts based on induced junctions
37. A simple theory of back surface field (BSF) solar cells10.1063/1.325262 ↗
38. Shunt types in crystalline silicon solar cells10.1002/pip.544 ↗
39. A nonlinear least squares fit procedure for analysis of immittance data of electrochemical systems10.1016/0167-2738(86)90031-7 ↗
40. Smets · 2016
41. Numerical simulations of hole carrier selective contacts in p-type c-si solar cells10.1016/j.solmat.2019.109937 ↗
42. Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells10.1016/j.solmat.2018.06.021 ↗
43. The role of heterointerfaces and subgap energy states on transport mechanisms in silicon heterojunction solar cells10.1002/pip.3300 ↗
44. Recombination mechanisms in amorphous silicon/crystalline silicon heterojunction solar cells10.1063/1.372230 ↗
45. Mass production of industrial tunnel oxide passivated contacts (i-topcon) silicon solar cells with average efficiency over 23% and modules over 345 w10.1002/pip.3180 ↗
46. Silicon wafers for industrial n-type SHJ solar cells: Bulk quality requirements, large-scale availability and guidelines for future developments10.1016/j.solmat.2021.111128 ↗
47. Silicon heterojunction solar cells: Recent technological development and practical aspects - from lab to industry10.1016/j.solmat.2018.07.018 ↗
48. Status and perspectives of crystalline silicon photovoltaics in research and industry
49. Extraordinarily high minority charge carrier lifetime observed in crystalline silicon10.1002/solr.202100605 ↗
50. Low-temperature processes for passivation and metallization of high-efficiency crystalline silicon solar cells10.1016/j.solener.2018.01.074 ↗
51. The versatility of passivating carrier-selective silicon thin films for diverse high-efficiency screen-printed heterojunction-based solar cells10.1002/pip.3227 ↗
52. Taking monocrystalline silicon to the ultimate lifetime limit10.1016/j.solmat.2018.05.040 ↗
53. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
54. Limiting efficiency of crystalline silicon solar cells due to Coulomb-enhanced auger recombination10.1002/pip.464 ↗
55. General parameterization of auger recombination in crystalline silicon10.1063/1.1432476 ↗
56. Improved quantitative description of auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
57. The self and mutual inductances of linear conductors10.6028/bulletin.088 ↗
58. Accurate series resistance measurement of solar cells10.1002/pip.1216 ↗