journal article·2023-06Open access

PV encapsulant formulations and stress test conditions influence dominant degradation mechanisms

Soňa Uličná, Archana Sinha, David C. Miller, Brian M. Habersberger, Laura T. Schelhas, Michael Owen-Bellini

Abstract

Polyethylene-based poly(ethylene-co-vinyl acetate) (EVA), polyolefin elastomer (POE), and thermoplastic polyolefin (TPO) are common polymer candidates for photovoltaic (PV) module encapsulants. The choice of encapsulant must be carefully considered in novel module designs, such as bifacial glass/glass laminates, to limit performance degradation through loss of optical transmittance, mechanical integrity, and corrosion—as well as potential-induced degradation. Encapsulant quality and resilience against environmental stressors are readily influenced by the additives in the encapsulant formulation. Here, we show that, the changes in optical transmittance after UV aging result from the discoloration caused by interactions between additives, and optical scattering from changes in the polymer crystal structure. We observed competing cross-linking and chain scission mechanisms, with their kinetics influenced by the presence of oxygen and elevated temperatures. Increasing chamber temperatures from 55 °C to 85 °C during the UV stress test amplified encapsulant discoloration and promoted polymer cross-linking, causing severe, irreversible damage that remains to be proven field relevant. Damp heat aging was found to be insufficient to produce significant encapsulant degradation; however, combining stress tests sequentially allowed detection of further degradation beyond the limitations of the damp heat test alone. Appropriate degradation screening methods are necessary to uncover potential encapsulant weaknesses.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Electron and X-Ray Spectroscopy Techniques · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Fischer · 2021
2. Field-aged glass/backsheet and glass/glass PV modules: encapsulant degradation comparison10.1109/JPHOTOV.2019.2958516 ↗
3. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
4. Sharma · 2020 · vol. 48268 · 1
5. Glass/glass photovoltaic module reliability and degradation: a review10.1088/1361-6463/ac1462 ↗
6. King · 2004
7. Comparative investigation and analysis of delaminated and discolored encapsulant degradation in crystalline silicon photovoltaic modules10.1016/j.solener.2020.04.041 ↗
8. Aspects of the thermal oxidation
9. Investigation of the degradation and stabilization of EVA-based encapsulant in field-aged solar energy modules10.1016/S0141-3910(96)00162-0 ↗
10. A custom high-throughput optical mapping instrument for accelerated stress testing of PV module materials10.1109/JPHOTOV.2021.3122925 ↗
11. Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules
12. Degradation of photovoltaic backsheets: comparison of the aging induced changes on module and component level10.1002/app.42093 ↗
13. Habersberger · 2018 · 3807
14. Investigation of newly developed thermoplastic polyolefin encapsulant principle properties for the c-Si PV module application10.1016/j.matchemphys.2020.122660 ↗
15. Comparison of degradation behavior of newly developed encapsulation materials for photovoltaic applications under different artificial ageing tests
16. Newly developed thermoplastic polyolefin encapsulant–A potential candidate for crystalline silicon photovoltaic modules encapsulation10.1016/j.solener.2019.11.018 ↗
17. Damp heat resilient thermoplastic polyolefin encapsulant for photovoltaic module encapsulation10.1016/j.solmat.2021.111024 ↗
18. Degradation in photovoltaic encapsulant transmittance: results of the second PVQAT TG5 artificial weathering study10.1002/pip.3551 ↗
19. IEC TS 62788-7-2, “Measurement procedures for materials used in photovoltaic modules - Part 7-2: environmental exposures - accelerated weathering tests of polymeric materials
20. 2017
21. 2016
22. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
23. Effect of vinylacetate content on crystallinity and second-order transitions in ethylene-vinylacetate copolymers10.1002/(SICI)1097-4628(19970606)64:10<1903::AID-APP4>3.0.CO;2-M ↗
24. Successive Self-nucleation and Annealing (SSA): correct design of thermal protocol and applications10.1016/j.eurpolymj.2015.01.015 ↗
25. Alfonso · 1979 · vol. 20 · 104
26. The melting behaviour of heat crystallized poly(ethylene terephthalate)10.1016/0032-3861(71)90045-0 ↗
27. Multi angle laser light scattering evaluation of field exposed thermoplastic photovoltaic encapsulant materials10.1002/ese3.106 ↗
28. Climate specific thermomechanical fatigue of flat plate photovoltaic module solder joints10.1016/j.microrel.2016.03.024 ↗
29. The impact of cold temperature exposure in mechanical durability testing of PV modules
30. Determination of crystallinity and thermal stability of newly developed thermoplastic polyolefin encapsulant for the c-Si PV module application
31. Nonisothermal melting and crystallization studies of homogeneous ethylene/α-olefin random copolymers10.1002/(SICI)1097-4628(19981205)70:10<1893::AID-APP4>3.0.CO;2-6 ↗
32. Determining the degree of crosslinking of ethylene vinyl acetate photovoltaic module encapsulants - a comparative study10.1016/j.solmat.2013.04.022 ↗
33. UV aging behaviour of ethylene-vinyl acetate copolymers (EVA) with different vinyl acetate contents10.1016/j.polymdegradstab.2010.02.020 ↗
34. Dependence of adhesion on degradation mechanisms of ethylene co-vinyl acetate encapsulants over the lifetime of photovoltaic modules10.1016/j.solmat.2022.111818 ↗
35. Monoclinic crystallites in ethylene copolymers detected by solid-state NMR and X-ray diffraction10.1021/ma030132n ↗
36. Comparison of crosslinking kinetics of UV-transparent ethylene-vinyl acetate copolymer and polyolefin elastomer encapsulants10.3390/polym14071441 ↗
37. FTIR analysis of silane grafted high density polyethylene10.1179/174328909X387711 ↗
38. Determination of stabilisers in polymeric materials used as encapsulants in photovoltaic modules10.1016/j.polymertesting.2013.12.004 ↗
39. Wang · 2020
40. Ageing characterization of commercial ethylene copolymer greenhouse films by analytical and mechanical methods10.1016/j.biosystemseng.2009.05.003 ↗
41. Chemical and mechanical interfacial degradation in bifacial glass/glass and glass/transparent backsheet photovoltaic modules10.1002/pip.3602 ↗
42. Degradation in photovoltaic encapsulant transmittance: results of the second PVQAT TG5 artificial weathering study
43. Correlation of spatially resolved photoluminescence and viscoelastic mechanical properties of encapsulating EVA in differently aged PV modules10.1002/pip.2734 ↗
44. Felder · 2018 · 1