Monte-Carlo optical model coupled with Inverse Adding-Doubling for Building Integrated Photovoltaic smart window design and characterisation
Source abstract
Abstract
Building Integrated Photovoltaic (BIPV) glazings are promising technologies with the benefits of electricity generation, solar shading and building energy savings. A new approach is to integrate BIPV windows with thermotropic materials such as Hydroxypropyl Cellulose (HPC) hydrogel, which offers adaptive advantages for the systems to respond to time-varying weather conditions but also enhances the PV electricity generation. To design such systems, knowledge of the temperature-dependent scattering properties of the selected thermotropic materials is of significance. In this study, a Building Integrated Photovoltaic (BIPV) smart window system consisting of a thermotropic membrane synthesised using HPC and gellan gum gelling agent for electricity generation and also solar control has been designed and investigated. An advanced optical model, which combines a Monte-Carlo ray-tracing technique with an Inverse Adding-Doubling (IAD) method, has been developed for characterising the thermotropic membrane in terms of angular scattering distribution under various membrane temperatures and HPC concentrations. Then the developed optical model has been validated by comparison with experimental measurements. Subsequently, the validated optical model has been used to design and optimise the proposed BIPV smart window. The effects of HPC concentration, geometric concentration ratio, thermotropic membrane thickness and glass refractive index on PV power outputs have been evaluated. Finally, a prototype of the BIPV smart window with a 6 wt% HPC membrane has been manufactured and tested under indoor conditions. From the experimental tests, it was found that the total transmittance of the double-pane glass sample with a 6 wt% HPC membrane layer decreases from approximately 90%to 14%, when the membrane temperature increases from 27 °C to 56 °C. The measured short-circuit current for the prototype BIPV smart window is up to 1.15 times higher than that of its counterpart system with a similar PV area but no membrane.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Building Energy and Comfort Optimization · Transition Metal Oxide Nanomaterials · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Enhancing the performance of building integrated photovoltaics10.1016/j.solener.2009.10.004 ↗
2. PV glazing technologies10.1016/j.rser.2015.04.145 ↗
3. Potential of building integrated and attached/applied photovoltaic (BIPV/BAPV) for adaptive less energy-hungry building's skin: a comprehensive Review10.1016/j.jclepro.2020.123343 ↗
4. Numerical modelling and experimental validation of a low concentrating photovoltaic system10.1016/j.solmat.2013.01.035 ↗
5. Performance modeling and testing of a building integrated concentrating photovoltaic (BICPV) system10.1016/j.solmat.2014.11.019 ↗
6. Luminescent solar concentrators: from experimental validation of 3D ray-tracing simulations to coloured stained-glass windows for BIPV10.1016/j.solmat.2013.11.026 ↗
7. Optical characterisation and optimisation of a static window integrated concentrating photovoltaic system10.1016/j.solener.2013.02.012 ↗
8. An experimental analysis of the optical, thermal and power to weight performance of plastic and glass optics with AR coatings for embedded CPV windows10.1016/j.solmat.2019.110027 ↗
9. Optical efficiency–concentration ratio trade-off for a flat panel photovoltaic system with diffuser type concentrator10.1016/j.solmat.2012.04.012 ↗
10. Smart solar concentrators for building integrated photovoltaic façades10.1016/j.solener.2016.03.046 ↗
11. Anisotropic reflectance from turbid media10.1364/JOSAA.27.001032 ↗
12. Method to determine the optical properties of turbid media10.1364/AO.47.003216 ↗
13. Radiance based method for accurate determination of volume scattering parameters using GPU-accelerated Monte Carlo10.1364/OE.25.022575 ↗
14. Effects of optical variables in a single integrating sphere system on estimation of scattering properties of turbid media10.1016/j.biosystemseng.2020.03.012 ↗
15. Double-integrating-sphere system for measuring the optical properties of tissue10.1364/AO.32.000399 ↗
16. Determining the optical properties of turbid media by using the adding–doubling method10.1364/AO.32.000559 ↗
17. Determination of volume scattering parameters that reproduce the luminance characteristics of diffusers10.1364/OE.24.011727 ↗
18. Accurate and robust characterization of volume scattering materials using the intensity-based inverse adding-doubling method
19. Determination of the bulk scattering parameters of diffusing materials10.1364/AO.52.004083 ↗
20. Optical absorption and scattering of bovine cornea, lens and retina in the visible region10.1007/s10103-009-0677-0 ↗
21. Optimization of the hyperspectral imaging-based spatially-resolved system for measuring the optical properties of biological materials10.1364/OE.18.017412 ↗
22. Potential of a spectroscopic measurement method using adding-doubling to retrieve the bulk optical properties of dense microalgal media10.1366/13-07308 ↗
23. Optical scattering properties of intralipid phantom in presence of encapsulated microbubbles10.1155/2014/471764 ↗
24. Prahl · 2011 · 1
25. Relationship between tissue firmness and optical properties of ‘Royal Gala’apples from 400 to 1050 nm10.1016/j.postharvbio.2014.03.007 ↗
26. Measurement of the light absorption and scattering properties of onion skin and flesh at 633 nm10.1016/j.postharvbio.2013.07.032 ↗
27. Integrating-sphere measurements for determining optical properties of tissue-engineered oral mucosa10.2971/jeos.2015.15012 ↗
28. Nanoparticle-free tissue-mimicking phantoms with intrinsic scattering10.1364/BOE.7.002088 ↗
29. Estimation of the effective phase function of bulk diffusing materials with the inverse adding-doubling method10.1364/AO.53.002117 ↗
30. Precise optical modeling of quantum dots for white light-emitting diodes10.1038/s41598-017-16966-2 ↗
31. Design and development of a reflective membrane for a novel building integrated concentrating photovoltaic (BICPV) ‘smart window’ system10.1016/j.apenergy.2016.07.125 ↗
32. Determining the optical properties of turbid media by using the adding–doubling method10.1364/AO.32.000559 ↗
33. The adding-doubling method
34. Measurements of fundamental properties of homogeneous tissue phantoms10.1117/1.JBO.20.4.045004 ↗
35. Rowe · 2009
36. Wüstenberg · 2014
37. General method for determining light scattering and absorption of nanoparticle composites10.1002/adom.201801315 ↗
38. Phase diagram of aqueous solutions of (hydroxypropyl) cellulose10.1021/ma00195a050 ↗
39. Transmittance and reflectance studies of thermotropic material for a novel building integrated concentrating photovoltaic (BICPV)‘Smart Window'System10.3390/en10111889 ↗
40. The conformation of thermoresponsive polymer brushes probed by optical reflectivity10.1021/acs.langmuir.6b00138 ↗
41. Tunable optical nanoantennas incorporating bowtie nanoantenna arrays with stimuli-responsive polymer10.1038/srep18567 ↗
42. Temperature-responsive hydrogel with ultra-large solar modulation and high luminous transmission for “smart window” applications10.1039/C4TA02287D ↗
43. Glass in building – determination of luminous and solar characteristics of glazing
44. Selection of thermotropic materials for overheat protection of polymer absorbers10.1016/j.solener.2013.10.026 ↗
45. Modest · 2013
46. Spectral effects on the transmittance, solar heat gain, and performance rating of glazing systems10.1016/j.solener.2008.12.012 ↗
47. Laser speckle imaging in the spatial frequency domain10.1364/BOE.2.001553 ↗
48. Concentrated photovoltaic thermal (CPVT) solar collector systems: Part I–Fundamentals, design considerations and current technologies10.1016/j.rser.2015.05.036 ↗
49. Overall detail comparison for a building integrated concentrating photovoltaic/daylighting system10.1016/j.enbuild.2019.07.018 ↗