journal article·2021-01

Efficient and stable perovskite solar cells via shortwave infrared polymer passivation

Jian Xiong, Naresh Eedugurala, Yifang Qi, Wei Liu, Anthony R. Benasco, Qiqi Zhang, Sarah E. Morgan, Michael D. Blanton, Jason D. Azoulay, Qilin Dai

Publisher page

Abstract

Abstract Defect passivation plays an important role in the performance of perovskite solar cells (PSCs). Here, a narrow bandgap conjugated polymer with hole mobility of 3.4 × 10−4 cm2 V−1 s−1 is utilized as a passivation agent in the fabrication of air-prepared PSCs. Theoretical calculations complemented by Fourier transform infrared absorption spectroscopy (FTIR) demonstrate that N, S and O atoms in the polymer can behave as Lewis bases, which interact with Pb defects in the MAPbI3 films to passivate grain boundaries (GBs) and interface defects. These interactions synergistically promote an enhancement of the crystallinity and smoothness of the films. Solar cells fabricated with the polymer passivation layer exhibit average efficiencies of 18.7%–19.6% compared to an average of 16.7% for reference devices. Unencapsulated devices retained approximately 80% of their initial efficiency following 600 h of exposure in air, compared with ~30% for reference devices. The moisture stability of the devices was also dramatically improved owing to the long hydrophobic alkyl chains within the polymer. This study demonstrates that narrow bandgap materials with tailored functionality can dramatically improve the PCE and stability of PSCs and shed light on the design of the passivants that further improve film quality and device performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. NREL · 2019
2. Efficient and non-hysteresis CH3NH3PbI3/PCBM planar heterojunction solar cells10.1016/j.orgel.2015.05.028 ↗
3. Flexible high power-per-weight perovskite solar cells with chromium oxide-metal contacts for improved stability in air10.1038/nmat4388 ↗
4. A review on morphology engineering for highly efficient and stable hybrid perovskite solar cells,10.1039/C8TA04120B ↗
5. Wearable large-scale perovskite solar-power source via nanocellular scaffold10.1002/adma.201703236 ↗
6. International Energy Agency-Photovoltaic Power Systems Technology Collaboration Programme · 2018
7. Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts10.1039/C5EE00615E ↗
8. Polymer doping for high-efficiency perovskite solar cells with improved moisture stability10.1002/aenm.201701757 ↗
9. Challenges for commercializing perovskite solar cells10.1126/science.aat8235 ↗
10. Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells10.1038/s41467-019-08455-z ↗
11. Tailoring passivation molecular structures for extremely small open-circuit voltage loss in perovskite solar cells10.1021/jacs.8b13091 ↗
12. Stable and efficient organo-metal halide hybrid perovskite solar cells via π-conjugated lewis base polymer induced trap passivation and charge extraction10.1002/adma.201706126 ↗
13. π-Conjugated Lewis base: efficient trap-passivation and charge-extraction for hybrid perovskite solar cells10.1002/adma.201604545 ↗
14. Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite films10.1039/C6EE00413J ↗
15. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
16. Passivation of grain boundaries by phenethylammonium in formamidinium-methylammonium lead halide perovskite solar cells10.1021/acsenergylett.8b00121 ↗
17. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
18. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
19. High-performance inverted perovskite solar cells using 4-diaminomethylbenzoic as a passivant10.1039/D0NR01142H ↗
20. Enormously improved CH3NH3PbI3 film surface for environmentally stable planar perovskite solar cells with PCE exceeding 19.9%10.1016/j.nanoen.2018.03.046 ↗
21. The role of PbI2 in CH3NH3PbI3 perovskite stability, solar cell parameters and device degradation,10.1039/C7CP04749E ↗
22. Detrimental effect of unreacted PbI2 on the long-term stability of perovskite solar cells10.1002/adma.201905035 ↗
23. Perovskite photovoltaics: the significant role of ligands in film formation, passivation, and stability10.1002/adma.201805702 ↗
24. Recent progresses on defect passivation toward efficient perovskite solar cells10.1002/aenm.201902650 ↗
25. Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells10.1038/s41467-019-10985-5 ↗
26. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
27. Evidence for surface defect passivation as the origin of the remarkable photostability of unencapsulated perovskite solar cells employing aminovaleric acid as a processing additive10.1039/C8TA11985F ↗
28. Efficient and stable chemical passivation on perovskite surface via bidentate anchoring10.1002/aenm.201803573 ↗
29. Modifying perovskite films with polyvinylpyrrolidone for ambient-air-stable highly bendable solar cells10.1021/acsami.8b04236 ↗
30. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with effciency greater than 21%10.1038/nenergy.2016.142 ↗
31. Thin insulating tunneling contacts for efficient and water-resistant perovskite solar cells10.1002/adma.201600969 ↗
32. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with effciency greater than 21%10.1038/nenergy.2016.142 ↗
33. Covalently connecting crystal grains with polyvinylammonium carbochain backbone to suppress grain boundaries for long-term stable perovskite solar cells10.1021/acsami.6b15434 ↗
34. Tailored phase conversion under conjugated polymer enables thermally stable perovskite solar cells with efficiency exceeding 21%10.1021/jacs.8b10520 ↗
35. Conjugated polymer-assisted grainboundary passivation for efficient inverted planar perovskite solar cells10.1002/adfm.201808855 ↗
36. A universal strategy to utilize polymeric semiconductors for perovskite solar cells with enhanced efficiency and longevity10.1002/adfm.201706377 ↗
37. Molecular engineering of conjugated polymers for efficient hole transport and defect passivation in perovskite solar cells10.1016/j.nanoen.2017.12.028 ↗
38. The role of dielectric screening in organic shortwave infrared photodiodes for spectroscopic image sensing10.1002/adfm.201805738 ↗
39. Solution-processed phototransistors combining organic absorber and charge transporting oxide for visible to infrared light detection10.1021/acsami.9b08622 ↗
40. Dependence of power conversion properties of perovskite solar cells on operating temperature10.1063/1.5041028 ↗
41. Dopant-free organic hole-transporting material for efficient and stable inverted all-inorganic and hybrid perovskite solar cells10.1002/adma.201908011 ↗
42. Fractionation and characterization for a propylene–ethylene random copolymer10.1295/polymj.34.700 ↗
43. Electrochemically switchable photoluminescence of an anionic dye in a cationic metallo-supramolecular polymer10.1039/C5TC03071D ↗
44. Validation of ATR FT-IR to identify polymers of plastic marine debris,including those ingested by marine organisms10.1016/j.marpolbul.2017.12.061 ↗
45. Surface modification of cellulose membranes with zwitterionic polymers for resistance to protein adsorption and platelet adhesion10.1016/j.memsci.2010.01.015 ↗
46. Vibrational properties of the organic−Inorganic halide perovskite CH3NH3PbI3 from theory and experiment: factor group analysis, first-principles calculations, and low-temperature infrared spectra10.1021/acs.jpcc.5b07432 ↗
47. Infrared spectroscopic study of vibrational modes in methylammonium lead halide perovskites10.1021/acs.jpclett.5b01309 ↗
48. The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells10.1039/C6EE03586H ↗
49. A review on morphology engineering for highly efficient and stable hybrid perovskite solar cells,10.1039/C8TA04120B ↗
50. Gold nanoparticles functionalized with fullerene derivative as an effective interface layer for improving the efficiency and stability of planar perovskite solar cells10.1002/admi.202001144 ↗
51. New strategy for two-step sequential deposition: incorporation of hydrophilic fullerene in second precursor for high-performance p-i-n planar perovskite solar cells10.1002/aenm.201703054 ↗
52. Enhanced photovoltaic performance of perovskite solar cells using polymer P(VDF-TrFE) as a processed additive10.1021/acs.jpcc.6b05255 ↗
53. Hole transporting materials for perovskite solar cells: a chemical approach10.1039/C8CS00262B ↗
54. Efficient electron-blocking layer-free planar heterojunction perovskite solar cells with a high open-circuit voltage10.1016/j.orgel.2015.07.057 ↗
55. Highly efficient and stable perovskite solar cells via bilateral passivation layers10.1039/C9TA08084H ↗
56. Impedance spectroscopy of perovskite solar cells: studying the dynamics of charge carriers before and after continuous operation
57. Efficient and stable inverted polymer solar cells using TiO2 nanoparticles and analysized by Mott-Schottky capacitance10.1016/j.orgel.2014.04.041 ↗
58. Performance enhancement of perovskite solar cells induced by lead acetate as an additive10.1002/solr.201800066 ↗
59. Post-healing of defects: an alternative way for passivation of carbon-based mesoscopic perovskite solar cells via hydrophobic ligand coordination10.1039/C7TA09646A ↗
60. Interface degradation of perovskite solar cells and its modification using an annealing-free TiO2 NPs layer10.1016/j.orgel.2015.12.010 ↗