Fabrication of perovskite solar cells based on vacuum-assisted linear meniscus printing of MAPbI3
Source abstract
Abstract
Scale-up deposition methods in perovskite solar cell research, are mostly used under humidity environment outside the glove-box. Also, the as-printed absorbing layer before the post-annealing process is always wet. Thus, controlling the morphology and crystallization of perovskite thin-films in up-scaled deposition systems is difficult and strongly investigated by the researchers. In this work, we introduce an anti-solvent-free meniscus printing method in which, the absorbing perovskite film with optimal performance is achieved. To this end, we check the printing parameters to get to the optimized film characteristics. Also, a vacuum chamber (<100 Pa) is used for 30 s to remove the solvent with appropriate pace from the as-printed wet perovskite films. Based on using vacuum process, instead of low surface coverage needle-like morphology, a pinhole-free dense film with appropriate grain-size (400–500 nm) and thickness (~480 nm) was obtained. The perovskite devices with optimized meniscus printed films with and without vacuum process show a PCE of 10.1% and 2.3% respectively (with active area of 0.1 cm 2). Also, the conversion efficiency of 8.0% was achieved with an active area of 1 cm 2. The result demonstrated the merit of using vacuum process before post-annealing step.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Halide perovskite materials for solar cells: a theoretical review10.1039/C4TA05033A ↗
2. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
3. Strategic review on processing routes towards highly efficient perovskite solar cells10.1039/C7TA08277K ↗
4. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
5. Manufacturing cost and market potential analysis of demonstrated roll-to-roll perovskite photovoltaic cell processes10.1016/j.solmat.2017.08.038 ↗
6. Research update: large-area deposition, coating, printing, and processing techniques for the upscaling of perovskite solar cell technology10.1063/1.4962478 ↗
7. A crystal engineering approach for scalable perovskite solar cells and module fabrication: a full out of glove box procedure
8. From nano-to micrometer scale: the role of antisolvent treatment on high performance perovskite solar cells10.1021/acs.chemmater.6b05353 ↗
9. Crystal growth engineering for high efficiency perovskite solar cells10.1039/C6CE00813E ↗
10. Anti-solvent crystallization strategies for highly efficient perovskite solar cells10.3390/cryst7100291 ↗
11. A fast deposition‐crystallization procedure for highly efficient lead iodide perovskite thin‐film solar cells10.1002/ange.201405334 ↗
12. Ultrasmooth perovskite film via mixed anti-solvent strategy with improved efficiency10.1021/acsami.6b14270 ↗
13. Amorphous hole-transporting layer in slot-die coated perovskite solar cells10.1016/j.nanoen.2016.11.022 ↗
14. Slot-die coated perovskite films using mixed lead precursors for highly reproducible and large-area solar cells
15. Inkjet printing of organic electronics–comparison of deposition techniques and state-of-the-art developments10.1039/c2tc00255h ↗
16. X. Lin, J. Kavalakkatt, N. Brusten, M.C. Lux-Steiner, A. Ennaoui, Inkjet printing of Kesterite and Chalcopyrite thin film absorbers for low cost photovoltaic application, http://dx.doi.org/10.4229/EUPVSEC20142014-3DV.2.64.
17. Inkjet printing of CH 3 NH 3 PbI 3 on a mesoscopic TiO 2 film for highly efficient perovskite solar cells10.1039/C4TA05675B ↗
18. Rapid combinatorial screening of inkjet-printed alkyl-ammonium cations in perovskite solar cells10.1016/j.matlet.2015.11.058 ↗
19. Air processed inkjet infiltrated carbon based printed perovskite solar cells with high stability and reproducibility10.1002/admt.201600183 ↗
20. Efficient and hysteresis-less pseudo-planar heterojunction perovskite solar cells fabricated by a facile and solution-saving one-step dip-coating method10.1016/j.orgel.2016.10.035 ↗
21. Enhanced efficiency of hot‐cast large‐area planar perovskite solar cells/modules having controlled chloride incorporation10.1002/aenm.201601660 ↗
22. Sequential dip-spin coating method: fully infiltration of MAPbI3-xClx into mesoporous TiO2 for stable hybrid perovskite solar cells10.1016/j.electacta.2017.05.184 ↗
23. Fast preparation of uniform large grain size perovskite thin film in air condition via spray deposition method for high efficient planar solar cells10.1016/j.solmat.2016.12.032 ↗
24. CH 3 NH 3 PbI 3− x Br x perovskite solar cells via spray assisted two-step deposition: Impact of bromide on stability and cell performance10.1016/j.matdes.2017.04.010 ↗
25. Large-area hysteresis-free perovskite solar cells via temperature controlled doctor blading under ambient environment10.1016/j.apmt.2016.03.002 ↗
26. Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers10.1039/C4EE03907F ↗
27. Composition engineering in doctor‐blading of perovskite solar cells10.1002/aenm.201700302 ↗
28. Progress in scalable coating and roll‐to‐roll compatible printing processes of perovskite solar cells toward realization of commercialization
29. Time annealing process for high performance large-area perovskite solar cells10.1021/acsnano.7b02015 ↗
30. Highly efficient perovskite solar modules by scalable fabrication and interconnection optimization10.1021/acsenergylett.7b01221 ↗
31. Grain engineering by ultrasonic substrate vibration post treatment of wet perovskite films for annealing-free, high performance, and stable perovskite solar cells10.1039/C8NR00540K ↗
32. Excitation of wet perovskite films by ultrasonic vibration improves the device performance10.3390/app8020308 ↗
33. Enhanced morphology and stability of high-performance perovskite solar cells with ultra-smooth surface and high fill factor via crystal growth engineering10.1039/C7SE00036G ↗
34. Room-temperature crystallization of hybrid-perovskite thin films via solvent–solvent extraction for high-performance solar cells10.1039/C5TA00477B ↗
35. Toward large scale roll‐to‐roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
36. Slot die coated planar perovskite solar cells via blowing and heating assisted one step deposition10.1016/j.solmat.2018.02.003 ↗
37. One-step deposition by slot-die coating of mixed lead halide perovskite for photovoltaic applications10.1016/j.solmat.2016.09.013 ↗
38. Slot-die processing of flexible perovskite solar cells in ambient conditions10.1016/j.solener.2017.04.071 ↗
39. Enhanced performance of perovskite solar cells by ultraviolet-ozone treatment of mesoporous TiO210.1016/j.apsusc.2017.12.085 ↗
40. Forming intermediate phase on the surface of PbI2 precursor films by short-time DMSO treatment for high-efficiency planar perovskite solar cells via vapor-assisted solution10.1021/acsami.7b17781 ↗