Worldwide outdoor round robin study of organic photovoltaic devices and modules
Source abstract
Abstract
Accurate characterization and reporting of organic photovoltaic (OPV) device performance remains one of the important challenges in the field. The large spread among the efficiencies of devices with the same structure reported by different groups is significantly caused by different procedures and equipment used during testing. The presented article addresses this issue by offering a new method of device testing using >suitcase sample> approach combined with outdoor testing that limits the diversity of the equipment, and a strict measurement protocol. A round robin outdoor characterization of roll-to-roll coated OPV cells and modules conducted among 46 laboratories worldwide is presented, where the samples and the testing equipment were integrated in a compact suitcase that served both as a sample transportation tool and as a holder and test equipment during testing. In addition, an internet based coordination was used via plasticphotovoltaics.org that allowed fast and efficient communication among participants and provided a controlled reporting format for the results that eased the analysis of the data. The reported deviations among the laboratories were limited to 5% when compared to the Si reference device integrated in the suitcase and were up to 8% when calculated using the local irradiance data. Therefore, this method offers a fast, cheap and efficient tool for sample sharing and testing that allows conducting outdoor measurements of OPV devices in a reproducible manner.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. 〈http://www.heliatek.com/newscenter/latest_news/neuer-weltrekord-fur-organische-solarzellen-heliatek-behauptet-sich-mit-12-zelleffizienz-als-technologiefuhrer/?lang=en〉
2. The state of organic solar cells – a meta analysis10.1016/j.solmat.2013.05.034 ↗
3. Reporting performance in organic photovoltaic devices10.1021/nn402883g ↗
4. Results of the 1984/1985 international round robin calibration summit working group on technology, growth and employment
5. J. Metzdorf, T. Wittchen, K. Heidler, K. Dehne, R. Shimokawa, F. Nagamine, H. Ossenbrink, L. Fornarini, C. Goodbody, M. Davies, K. Emery, R. Deblasio, Objectives and results of the PEP’87 round-robin calibration of reference cells and modules, in: Proceedings of the 21st IEEE Photovoltaic Specialists Conference, Orlando, FL, IEEE (1990) 952–959.10.1109/PVSC.1990.111759 ↗
6. Metzdorf · 1990
7. C.R. Osterwald, S. Anevsky, A.K. Barua, J. Dubard, K. Emery, D. King, J. Metzdorf, F. Nagamine, R. Shimokawa, N. Udayakumar, Y.X. Wang, W. Zaaiman, A. Zastrow, J. Zhang, Results of the PEP’93 intercomparison of reference cell calibrations and newer technology performance measurements, in: Proceedings of the 25th IEEE Photovoltaic Specialists Conference, Washington, DC, IEEE (1996) 1263–1266.10.1109/PVSC.1996.564362 ↗
8. Results of 1992 ASTM cell and module measurement intercomparison
9. The world photovoltaic scale: an international reference cell calibration program10.1002/(SICI)1099-159X(199907/08)7:4<287::AID-PIP259>3.0.CO;2-I ↗
10. T.R. Betts, R. Gottschalg, D.G. Infield, W. Kolodenny, M. Prorok, T. Zdanowicz, N. van der Borg, H. de Moor, G. Friesen, A. Guerin de Montgareuil, W. Herrmann, Round robin comparison of European outdoor measurement systems, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, 4–8 September (2006) 2447–2451.
11. W. Herrmann, S. Mau, F. Fabero, T. Betts, N. van der Borg, K. Kiefer, G. Friesen, W. Zaaiman, Advanced intercomparison testing of PV modules in European test laboratories, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 3–7 September (2007) 2506–2510.
12. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
13. Round-robin studies as a method for testing and validating high-efficiency ITO-free polymer solar cells based on roll-to-roll-coated highly conductive and transparent flexible substrates10.1002/aenm.201200079 ↗
14. Round robin performance testing of organic photovoltaic devices10.1016/j.renene.2013.09.034 ↗
15. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
16. The use of polyurethane as encapsulating method for polymer solar cells – an inter laboratory study on outdoor stability in 8 countries10.1016/j.solmat.2011.12.013 ↗
17. Low-cost upscaling compatibility of five different ITO-free architectures for polymer solar cells10.1002/app.39200 ↗
18. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
19. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules10.1016/j.solmat.2011.09.064 ↗
20. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
21. Accurate characterization of OPVs: device masking and different solar simulators10.1016/j.solmat.2012.11.020 ↗
22. How should you measure your excitonic solar cell?10.1039/c2ee03429h ↗