Nano-sized indium-free MTO/Ag/MTO transparent conducting electrode prepared by RF sputtering at room temperature for organic photovoltaic cells
Source abstract
Abstract
Abstract As an alternative to indium–tin oxide (ITO), MTO/Ag/MTO (MAM) multilayer transparent electrodes with a nano-sized Ag thin film embedded between Mn-doped tin oxide (MTO) layers were prepared. The MTO/Ag/MTO thin films were deposited on a glass substrate by RF sputtering at room temperature to evaluate their characteristics as transparent electrodes for organic photovoltaic cells (OPVs). Optical and electrical properties of the single layer MTO were investigated at various working pressures and oxygen partial pressures. Based on the optimal condition, the MTO/Ag/MTO multilayer electrode showed a sheet resistance of 10.1–10.6 Ω/sq and transmittance of 80.1–85.4% in the visible range (λ=380–780 nm). Their values are compatible with commercial indium–tin oxide (ITO). Conventional-type bulk hetero-junction organic photovoltaic cells (BHJ-OPVs) using the MTO/Ag/MTO multilayer electrode show an open circuit voltage (VOC) of 0.62 V, a short circuit current (JSC) of 7.12 mA/cm2, a fill factor (FF) of 0.62, and a power conversion efficiency (PCE) of 2.73%. This PCE is comparable with a commercial ITO electrode (3.17%). This suggests that the MTO/Ag/MTO multilayer electrode is a new promising transparent conducting electrode for BHJ-OPVs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Al2O3/Ag/Al2O3 multilayer thin film passivation prepared by plasma damage-free linear facing target sputtering for organic light emitting diodes10.1016/j.tsf.2013.05.003 ↗
2. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
3. Stacking sequence effect on the electrical and optical properties of multistacked flexible IZO/Ag/IZO electrodes10.1149/1.3312755 ↗
4. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
5. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
6. Effect of solution processed graphene oxide-nickel oxide bi-layer on cell performance of bulk-heterojunction organic photovoltaic10.1016/j.solmat.2011.06.008 ↗
7. Flexible Ag electrode for use in organic photovoltaics
8. Tin doped indium oxide thin films: electrical properties10.1063/1.367025 ↗
9. Mechanical flexibility of ZnSnO/Ag/ZnSnO films grown by roll-to-roll sputtering for flexible organic photovoltaics10.7567/JJAP.51.115801 ↗
10. Environmental and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
11. Electrical, optical, and structural properties of indium–tin oxide thin films for organic light-emitting devices10.1063/1.371708 ↗
12. Characteristics of indium-free ZTO/Ag/ZTO multilayer electrode grown on glass substrate at room temperature
13. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
14. Optimized ITO-free tri-layer electrode for organic solar cells10.1016/j.orgel.2013.01.030 ↗
15. Organic photovoltaic cells fabricated on SnOX/Ag/SnOX multilayer transparent conducting electrode10.1016/j.tsf.2012.05.029 ↗
16. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
17. Mn:SnO2 ceramics as p-type oxide semiconductor10.1016/j.matlet.2010.11.021 ↗
18. New figure of merit for transparent conductors10.1063/1.323240 ↗
19. Nano-sized Ag-inserted amorphous ZnSnO3 multilayer electrodes for cost-efficient inverted organic solar cells10.1016/j.solmat.2011.01.013 ↗
20. Cu-based multilayer transparent electrodes: a low-cost alternative to ITO electrodes in organic solar cells10.1016/j.solmat.2012.01.016 ↗
21. Versatile multilayer transparent electrodes for ITO-free and flexible organic solar cells10.1109/JSTQE.2010.2041637 ↗
22. Highly transparent ZTO/Ag/ZTO multilayer electrode deposited by inline sputtering process for organic photovoltaic cells
23. Flexible organic solar cells using an oxide/metal/oxide trilayer as transparent electrode10.1016/j.orgel.2012.05.047 ↗