journal article·2013-10

The annealing effects of tungsten oxide interlayer based on organic photovoltaic cells

Sang Bin Lee, Jin Ho Beak, Byung hyun Kang, Ki-Young Dong, Youn-Yeol Yu, Yang Doo Lee, Byeong-Kwon Ju

Publisher page

Abstract

Abstract We investigated the effect of tungsten oxide (WO3) interlayer as a hole collection layer on the performance of organic photovoltaic cells according to the thickness and temperature of the interlayer. The characteristics of organic photovoltaic cells such as fill factor, current density, and open circuit voltage are continuously improved by increasing the temperature of the WO3 interlayer. The surface of a treated WO3 film promotes the crystallization of P3HT because a treated WO3 film is more hydrophobic than a pristine WO3 film. Furthermore, the energy barrier between P3HT and the WO3 interlayer is minimized since the work function of the WO3 film after annealing progressively increases until a hole can be smoothly transferred. Therefore, organic photovoltaic cells using an interlayer of treated WO3 film have higher hole mobility and better efficiency. The efficiency of an organic photovoltaic cell with a 40 nm-thick WO3 interlayer is significantly enhanced from 0.94 to 3.04% as the temperature changes from room temperature to 350 °C under AM 1.5G illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
2. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
3. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
4. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
5. Influence of the indium tin oxide/organic interface on open-circuit voltage, recombination, and cell degradation in organic small-molecule solar cells10.1103/PhysRevB.83.165311 ↗
6. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
7. Doped conducting-polymer–semiconducting-polymer interfaces: their use in organic photovoltaic devices10.1103/PhysRevB.60.1854 ↗
8. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
9. Stability of polymer solar cells10.1002/adma.201104187 ↗
10. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
11. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
12. High fill factor polymer solar cells comprising a transparent, low temperature solution processed doped metal oxide/metal nanowire composite electrode10.1016/j.solmat.2012.06.039 ↗
13. Semi-transparent metal electrode of Cu–Ni as a replacement of an ITO in organic photovoltaic cells10.1016/j.solmat.2010.12.040 ↗
14. A review on the development of the inverted polymer solar cell architecture10.1080/15583724.2010.515764 ↗
15. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
16. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
17. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗
18. Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes10.1016/j.orgel.2009.03.016 ↗
19. Comparison of metal oxides as anode buffer layer for small molecule organic photovoltaic cells10.1016/j.solmat.2011.11.036 ↗
20. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
21. High fill factor polymer solar cells incorporating a low temperature solution processed WO3 hole extraction layer10.1002/aenm.201200330 ↗
22. Efficiency enhancement in organic photovoltaic cells: consequences of optimizing series resistance10.1002/adfm.200901107 ↗
23. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
24. The effect of annealing temperature on the statistical properties of WO3 surface10.1088/1742-5468/2006/09/P09017 ↗
25. Effects of annealing on morphological, structural and electrical properties of thermally evaporated WO3 thin films10.1016/j.spmi.2012.05.008 ↗
26. MoO3 buffer layer effect on photovoltaic properties of interpenetrating heterojunction type organic solar cells10.1016/j.tsf.2009.07.044 ↗
27. Structural and electrochemical properties of opaque sol–gel deposited WO3 layers10.1016/S0169-4332(03)00616-0 ↗
28. Hydrophilicity variation of WO3 thin films with annealing temperature10.1088/0022-3727/40/4/034 ↗
29. Enhanced performance in polymer solar cells by surface energy control10.1002/adfm.201000960 ↗
30. Interfacial modification to improve inverted polymer solar cells10.1039/b808004f ↗
31. Interfacial free energy driven nanophase separation in poly(3-hexylthiophene)/[6,6]-phenyl-C61-butyric acid methyl ester thin films10.1021/la300229u ↗
32. Double extraction of uniformly generated electron–hole pairs from insulators with noninjecting contacts10.1063/1.1660633 ↗
33. Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells
34. Charge transport and photocurrent generation in poly(3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
35. Simulation of light intensity dependent current characteristics of polymer solar cells10.1063/1.1646435 ↗
36. Selective interlayers and contacts in organic photovoltaic cells10.1021/jz2002259 ↗
37. Chemically modified graphene oxides as a hole transport layer in organic solar cells10.1039/c2cc33829g ↗