Induced photodegradation of quinoxaline based copolymers for photovoltaic applications
Source abstract
Abstract
We report here the synthesis and characterization of a series of p-type copolymers, which combine a fluorinated quinoxaline (FQ) acceptor unit either with a differently substituted benzodithiophene (BDT) or an unsubstituted thieno[3,2-b]thiophene (TT). The effect of the structural modifications on the photochemical stability of the resulting films is investigated and then correlated with the photovoltaic performance and lifetime measurements of corresponding photovolatic devices. To this end, we firstly studied the intrinsic stability of each polymer film by monitoring the UV-vis absorption decay, under simulated sunlight, as a function of ageing time. Bulk heterojunction solar cells, based on these polymers as donor materials, were fabricated and tested. Beside the initial values, we monitored the photovoltaic performance during prolonged light soaking in order to evaluate and compare the photostability of more complex systems such as working solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
3. The future of organic photovoltaics10.1039/C4CS00227J ↗
4. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
5. Single-junction polymer solar cells with over 10% efficiency by a novel two-dimensional donor–acceptor conjugated copolymer10.1021/am509047g ↗
6. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
7. A high efficiency solution processed polymer inverted triple junction solar cell exhibiting a power conversion efficiency of 11.83%10.1039/C4EE03048F ↗
8. Solution-processable polymeric solar cells: a review on materials, strategies and cell architectures to overcome 10%10.1016/j.orgel.2015.01.014 ↗
9. Fine structural tuning of cyanated dithieno[3,2‑b:2ʹ,3ʹ‑d]silole-oligothiophene copolymers: synthesis, characterization, and photovoltaic response10.1021/ma4011186 ↗
10. Influence of incorporating different electron-rich thiophene-based units on the photovoltaic properties of isoindigo-based conjugated polymers: an experimental and DFT study10.1021/ma401691r ↗
11. Structural factors that affects the performance of organic bulk heterojunction solar cells10.1021/ma400924b ↗
12. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester system10.1021/cr300005u ↗
13. Morphology of all-polymer solar cells10.1039/c2ee03071c ↗
14. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
15. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
16. Efficiency enhancement of P3HT:PCBM solar cells containing scattering Zn–Al hydrotalcite nanoparticles in the PEDOT:PSS layer10.2478/oph-2013-0001 ↗
17. Large scale deployment of polymer solar cells on land, on sea and in the air10.1039/c3ee43212b ↗
18. Organic photovoltaic greenhouses: a unique application for semi-transparent PV?10.1039/C4EE03132F ↗
19. Stability of polymer solar cells10.1002/adma.201104187 ↗
20. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
21. Photostability of organic materials used in polymer solar cells10.1002/pi.4656 ↗
22. Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb10.1039/c0jm03105d ↗
23. Fused thiophene/quinoxaline low band gap polymers for photovoltaic's with increased photochemical stability10.1016/j.solmat.2011.07.016 ↗
24. Stability study of quinoxaline and pyrido pyrazine based co-polymers for solar cell applications10.1016/j.solmat.2014.06.041 ↗
25. Durability of MDMO-PPV and MDMO-PPV: PCBM blends under illumination in the absence of oxygen10.1016/j.solmat.2007.12.003 ↗
26. Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend10.1016/j.solmat.2010.03.012 ↗
27. Side-chain engineering of benzodithiophene-fluorinated quinoxaline low-band-gap co-polymers for high-performance polymer solar cells10.1002/chem.201403153 ↗
28. Conversion constants for redox potentials measured versus different reference electrodes in acetonitrile solutions at 25°C10.1016/S0020-1693(99)00407-7 ↗
29. Bard · 2001
30. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
31. Conjugated side-chain-isolated D–A copolymers based on benzo[1,2-b:4,5-bʹ]dithiophene-alt-dithienylbenzotriazole: synthesis and photovoltaic properties10.1021/cm3017006 ↗
32. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
33. 2D π-conjugated benzo[1,2-b:4,5-bʹ]dithiophene- and quinoxaline-based copolymers for photovoltaic applications10.1039/c3ra44238a ↗
34. Structural tuning of quinoxaline-benzodithiophene copolymers via alkyl side chain manipulation: synthesis, characterization and photovoltaic properties10.1039/C4TA01479K ↗
35. Effects of π-conjugated bridges on photovoltaic properties of donor-π-acceptor conjugated copolymers10.1021/ma202656b ↗
36. Polymer aggregation control in polymer–fullerene bulk heterojunctions adapted from solution10.1039/C4TA04736B ↗
37. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
38. The impact of thienothiophene isomeric structures on the optoelectronic properties and photovoltaic performance in quinoxaline based donor–acceptor copolymers10.1039/C5PY00075K ↗
39. Balanced ambipolar organic thin-film transistors operated under ambient conditions: role of the donor moiety in BDOPV-based conjugated copolymers10.1021/acs.chemmater.5b00018 ↗
40. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
41. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
42. Stability of n-type doped conducting polymers and consequences for polymeric microelectronic devices10.1016/S0379-6779(97)80097-5 ↗
43. Mind the gap!10.1039/C3MH00098B ↗
44. A family of electroluminescent silyl-substituted poly(p-phenylenevinylene)s: synthesis, characterization, and structure–property relationships10.1021/ma0005670 ↗
45. Influence of molecular weight on the performance of organic solar cells based on a fluorene derivative10.1002/adfm.201000224 ↗
46. Impact of molecular weight on charge carrier dissociation in solar cells from a polyfluorene derivative10.1016/j.orgel.2009.07.002 ↗
47. Enhanced photostability of poly(1,3-phenylene diphenylvinylene)-derivatives by diphenyl-substitution10.1016/S0379-6779(98)00166-0 ↗
48. Design rules for donors in bulk-heterojunction solar cells-towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
49. Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends10.1039/C2EE23235A ↗
50. Conjugated polymers based on benzodithiophene and fluorinated quinoxaline for bulk heterojunction solar cells: thiophene versus thieno[3,2-b]-thiophene as p-conjugated spacers10.1039/c3py01519j ↗
51. The photo-stability of polymer solar cells: contact photo-degradation and the benefits of interfacial layers10.1002/adfm.201202567 ↗
52. Side-chain tunability of furan-containing low-band-gap polymers provides control of structural order in efficient solar cells10.1021/ja2089662 ↗
53. The effect of polymer solubilizing side-chains on solar cell stability10.1039/C5CP01158B ↗
54. Disorder-induced open-circuit voltage losses in organic solar cells during photoinduced burn-in10.1002/aenm.201500111 ↗
55. A comparative tudy of fluorine substituents for enhanced stability of flexible and ITO-free high-performance polymer solar cells10.1002/polb.23505 ↗
56. Photochemical stability of conjugated polymers, electron acceptors and blends for polymer solar cells resolved in terms of film thickness and absorbance10.1039/c0jm03105d ↗
57. Photo- and thermal degradation of MDMO-PPV:PCBM blends10.1016/j.solmat.2006.10.015 ↗
58. Photoinduced degradation of polymer and polymer–fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
59. The role of electron affinity in determining whether fullerenes catalyze or inhibit photooxidation of polymers for solar cells10.1002/aenm.201200169 ↗
60. The effect of PCBM dimerization on the performance of bulk heterojunction solar cells10.1002/aenm.201300693 ↗
61. Investigation of radical and cationic cross-linking in high-efficiency low band gap solar cell polymers10.1002/aenm.201401228 ↗
62. New insights into the mechanisms of photodegradation/stabilization of P3HT:PCBM active layers using poly(3-hexyl-d13-thiophene)10.1021/cm402193y ↗