journal article·2023-05

Boron tube diffusion process parameters for high-efficiency n-TOPCon solar cells with selective boron emitters

Qinqin Wang, kaiyuan Guo, Ling Yuan, Lvzhou Li, Hui Peng, Bairu Li, Aili Wang, Luozheng Zhang, Wangping Wu, Jianning Ding, Ningyi Yuan

Publisher page

Abstract

Photovoltaic cell technology plays an important role in achieving carbon neutrality. However, a major challenge to further improving the conversion efficiency is the recombination and electrical contact of boron (B)-doped emitters in n-TOPCon solar cells. Boron-selective emitters (B-SEs) are ideal candidates for reducing the emitter recombination and contact resistivity of n-type silicon solar cells and for providing better blue response. In this study, the key process parameters of BCl 3 tube furnace diffusion (drive-in temperature, oxidation temperature, and BCl 3 gas flow, etc.) were identified, and their impact on the performance of the emitter dark saturation current density under the passivation layer ( J 0) and on the contact resistivity (ρ c) was investigated. The results showed that the BCl 3 gas flow rate ( G BCl3 ) had much less impact than drive-in and oxidation conditions, which is mainly owing to the lower-temperature deposition with lower boron diffusivity. However, the O 2 flow rate under high-temperature oxidation had the greatest impact on passivation and contact resistivity, which is mainly related to the thicker boron rich layer (BRL), resulting in high recombination. We introduced B-SEs formed by 3D printing mask technology and secondary diffusion with p ++≈ 75 Ω/sq and p + ≈ 230 Ω/sq, and the efficiency improved by 0.27% absolute to 24.05%, mainly because of the increased open-circuit voltage ( V oc ) of 10 mV. After the optimization of B-SEs and passivation processes, we manufactured industrial-grade TOPCon cells with efficiency ( E ff), V oc, J sc, and fill factor (FF) values as high as 24.2%, 721 mV, 40.88 mA/cm 2, and 82.1%, respectively. This simplified B-selective emitter and the implementation of passivated contacts can thus be considered to further increase cell efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Advancements in Semiconductor Devices and Circuit Design · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. A passivated rear contact for high efficiency n-type Si solar cells enabling high VOC’S and FF>82
2. Passivated rear contacts for high efficiency n-type Si solar cells providing high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
3. 24.58% total area efficiency of screen-printed, large area industrial silico solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
4. Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts10.1016/j.solmat.2018.12.026 ↗
5. Boron Selective Emitter Formation with Un-metallized J0e of 13fA/cm2 For Silicon Solar Cell Applications
6. Green-laser-doped selective emitters with separate BBr3 diffusion processes for high-efficiency n-type silicon solar cells10.1016/j.solmat.2020.110462 ↗
7. Low recombination firing-through Al paste for N-type solar cell with boron emitter10.3390/ma14040765 ↗
8. Passivating contacts and tandem concepts: approaches for the highest silicon-based solar cell efficiencies10.1063/1.5139202 ↗
9. Schultz-Wittmann · 2016 · 456
10. Bellini · 2020
11. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
12. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
13. Carrier population control and surface passivation in solar cells10.1016/j.solmat.2018.04.026 ↗
14. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
15. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
16. n-type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
17. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
18. Tunnel oxide passivated rear contact for large area n-type front junction silicon solar cells providing excellent carrier selectivity10.3934/matersci.2016.1.180 ↗
19. Mass production of industrial tunnel oxide passivated contacts (i-TOPCon) silicon solar cells with average efficiency over 23% and modules over 345W10.1016/j.solmat.2019.110258 ↗
20. Screen printed, large area bifacial selective emitter N-PERT cells using single-step implantation through laser patterned dielectric layer
21. A laser induced forward transfer process for selective boron emitters10.1016/j.solmat.2016.12.026 ↗
22. BBr3 diffusion with second deposition for laser-doped selective emitters from borosilicate glass10.1016/j.solmat.2018.06.042 ↗
23. Boron laser doping using spin on dopant for textured crystalline silicon solar cell
24. Selective boron emitters using laser-induced forward transfer versus laser doping from borosilicate glass10.1109/JPHOTOV.2017.2717338 ↗
25. Advanced BBr3 diffusion with second deposition step for selective emitter formation by laser doping
26. High efficiency selective boron emitter formed by wet chemical etch-back for n-type screen-printed Si solar cells10.1063/1.4973626 ↗
27. High-efficiency n-type silicon PERT bifacial solar cells with selective emitters and poly-Si based passivating contacts10.1016/j.solener.2019.09.085 ↗
28. Towards understanding the characteristics of Ag-Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
29. Impact of boron doping profiles on the specific contact resistance of screen printed Ag-Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
30. Predictive simulation framework for boron diffused p+ layer optimization: sensitivity analysis of boron tube diffusion process parameters of industrial n-type silicon wafer solar cells10.1016/j.solmat.2018.09.019 ↗
31. Novel technique for fabrication of n-type crystalline silicon selective emitter for solar cell processing
32. Selective boron diffusion without masking layer using boric acid for solar cell emitter formation10.1007/s10854-017-6856-z ↗
33. New approach to obtain boron selective emitters
34. Etch-back of p+ structures for selective boron emitters in n-type c-Si solar cells10.1016/j.egypro.2014.08.086 ↗
35. Driving-in effect and gettering degradation induced by laser doping using borosilicate glass as dopant source10.1007/s10854-019-01004-w ↗
36. Laser doping from borosilicate glass for metallization of boron emitters
37. Laser-induced boron diffusion for selective emitter n-type solar cells
38. Development and characterization of multifunctional PassDop layers for local p+-laser doping10.1016/j.egypro.2017.09.278 ↗
39. Development of n-type selective emitter silicon solar cells by laser doping using boron-doped silicon paste10.1016/j.egypro.2016.07.122 ↗
40. Laser doping of boron doped Si paste for high efficiency silicon solar cells10.7567/JJAP.54.08KD06 ↗
41. Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombination10.1109/JPHOTOV.2016.2591318 ↗
42. Selective laser doping from boron silicate glass10.1016/j.egypro.2012.07.093 ↗
43. Analysis of laser doping of silicon using different boron dopant sources10.1016/j.apsusc.2014.01.071 ↗
44. Investigation of contact resistivity on a laser doped boron emitter from CVD doping layers
45. Comparison of laser-doped emitters from as-deposited and thermally diffused APCVD doping glasses on silicon substrates
46. Laser doping from as-deposited CVD layers for high-efficiency crystalline silicon solar cells, in: the 9th International Conference on Crystalline Silicon Photovoltaics10.1063/1.5123863 ↗
47. Laser doped boron emitters with sputtered precursor
48. Full area laser doped boron emitter silicon solar cells
49. Impact of boron doping on electrical performance and efficiency of n-TOPCon solar cells10.1016/j.solener.2021.08.075 ↗