journal article·2023-03Open access

Low processing temperatures explored in Sb2S3 solar cells by close-spaced sublimation and analysis of bulk and interface related defects

R. Krautmann, N. Spalatu, R. Josepson, R. Nedzinskas, R. Kondrotas, R. Gržibovskis, A. Vembris, M. Krunks, I. Oja Acik

Abstract

Antimony trisulfide (Sb2S3) is a promising photovoltaic absorber, which has so far been fabricated mainly by chemical deposition methods. Despite its aptness for congruent sublimation, less research efforts have been made on low-temperature Sb2S3 processing by physical methods. In this regard, recent studies show large variation in the processing temperature of Sb2S3 films, which overall brings into question the need for higher substrate temperatures (>350 °C). Furthermore, in-depth analysis of defect structure of Sb2S3 employing temperature-dependent admittance spectroscopy (TAS) and photoluminescence (PL) remains largely unexplored. In this work, we systematically study the effect of close-spaced sublimation (CSS) substrate temperature on Sb2S3 absorber growth, employing a wide temperature range of 240–400 °C. Temperatures above 320 °C caused cracking phenomena in the Sb2S3 absorber film, proving the unviability of higher processing temperatures. CSS processing temperature of 300 °C was found optimal, producing crack-free Sb2S3 films with increased presence of (hk1) planes, and achieving the best CdS/Sb2S3 device with photoconversion efficiency of 3.8%. TAS study revealed two deep defects with activation energies of 0.32 eV and 0.37 eV. Low-temperature PL measurement revealed a band-to-band emission at 1.72 eV and a broad band peaked at 1.40 eV, which was assigned to a donor-acceptor pair recombination. Temperature-dependent I-V analysis showed that recombination at CdS–Sb2S3 interface remains a large limitation for the device efficiency.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Structural and optical properties of amorphous and crystalline antimony sulfide thin-films10.1016/j.tsf.2007.03.043 ↗
3. Rotational design of charge carrier transport layers for optimal antimony trisulfide solar cells and its integration in tandem devices10.1016/j.solmat.2019.110279 ↗
4. Semitransparent Sb2S3 thin film solar cells by ultrasonic spray pyrolysis for use in solar windows10.3762/bjnano.10.230 ↗
5. One-dimensional Sb2Se3 enabling ultra-flexible solar cells and mini-modules for IoT applications10.1016/j.nanoen.2021.106101 ↗
6. A transparent, high-performance, and stable Sb2S3 photoanode enabled by heterojunction engineering with conjugated polycarbazole frameworks for unbiased photoelectrochemical overall water splitting devices
7. Recent development in defects engineered photocatalysts: an overview of the experimental and theoretical strategies10.1002/eem2.12171 ↗
8. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
9. Isotype heterojunction solar cells using n-type Sb2Se3 thin films10.1021/acs.chemmater.0c00223 ↗
10. Analysis of grain orientation and defects in Sb2Se3 solar cells fabricated by close-spaced sublimation10.1016/j.solener.2021.07.022 ↗
11. In situ growth of [hk1]-Oriented Sb2S3 for solution-processed planar heterojunction solar cell with 6.4% efficiency10.1002/adfm.202002887 ↗
12. Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth10.1016/j.solmat.2016.07.050 ↗
13. Controllable orientations for Sb2S3 solar cells by vertical VTD method10.1002/pip.3278 ↗
14. Enhanced photovoltaic properties in Sb2S3 planar heterojunction solar cell with a fast selenylation approach10.1186/s11671-018-2651-x ↗
15. Sb2S3 solar cells with a cost-effective and dopant-free fluorene-based enamine as a hole transport material10.1039/D2SE00356B ↗
16. Continuous, crystalline Sb2S3 ultrathin light absorber coatings in solar cells based on photonic concentric p-i-n heterojunctions10.1016/j.nanoen.2022.107820 ↗
17. Highly improved Sb2S3 sensitized-inorganic-organic heterojunction solar cells and quantification of traps by deep-level transient spectroscopy10.1002/adfm.201304238 ↗
18. CdS/Sb2S3 heterojunction thin film solar cells with a thermally evaporated absorber10.1039/C7TC02460F ↗
19. Revealing composition and structure dependent deep-level defect in antimony trisulfide photovoltaics
20. Postsurface selenization for high performance Sb2S3 planar thin film solar cells10.1021/acsphotonics.7b00858 ↗
21. Scalable and efficient Sb2S3 thin-film solar cells fabricated by close space sublimation10.1063/1.5090773 ↗
22. Fabrication of Sb2S3 solar cells by close space sublimation and enhancing the efficiency via co-selenization10.1016/j.mssp.2022.106451 ↗
23. Fabrication of Sb 2 S 3 planar thin film solar cells with closed-space sublimation method, 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion
24. Quasi-vertically-orientated antimony sulfide inorganic thin-film solar cells achieved by vapor transport deposition10.1021/acsami.0c02697 ↗
25. Sodium fluoride doping approach to CdTe solar cells10.1021/acsaem.1c03351 ↗
26. A new approach for alkali incorporation in Cu2ZnSnS4 solar cells
27. Post-deposition annealing and interfacial atomic layer deposition buffer layers of Sb2Se3/CdS stacks for reduced interface recombination and increased open-circuit voltages
28. Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: interrelation between grain structure, interface intermixing and solar cell performance10.1016/j.solmat.2021.111045 ↗
29. Effects of post-deposition annealing and copper inclusion in superstrate Sb2Se3 based solar cells by thermal evaporation10.1016/j.solener.2019.09.069 ↗
30. Efficient Sb2Se3/CdS planar heterojunction solar cells in substrate configuration with (hk0) oriented Sb2Se3 thin films10.1016/j.solmat.2020.110603 ↗
31. Does Sb2Se3 admit nonstoichiometric conditions? How modifying the overall Se content affects the structural, optical, and optoelectronic properties of Sb2Se3 thin films10.1021/acsami.1c20764 ↗
32. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
33. Investigation of electrically-active defects in Sb2Se3 thin-film solar cells with up to 5.91% efficiency via admittance spectroscopy10.1016/j.solmat.2018.07.004 ↗
34. Fabrication of Sb2S3 thin films by sputtering and post-annealing for solar cells10.1016/j.ceramint.2018.10.155 ↗
35. The influence of film deposition temperature on the subsequent post-annealing and crystallization of sputtered Sb2S3 thin films10.1016/j.jpcs.2017.07.035 ↗
36. Alcohol vapor post-annealing for highly efficient Sb2S3 planar heterojunction solar cells10.1002/solr.201900133 ↗
37. Temperature dependent electrical characterization of thin film Cu 2 ZnSnSe 4 solar cells10.1088/0022-3727/49/8/085101 ↗
38. Study of the optical properties of Sb2(Se1-xSx)3 (x = 0–1) solid solutions10.1016/j.mssp.2022.106571 ↗
39. Uniform Sb2S3 optical coatings by chemical spray method10.3762/bjnano.10.18 ↗
40. A quantitative method of determining the degree of texture of zinc electrodeposits10.1149/1.2097318 ↗
41. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells
42. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
43. Postdeposition processing of SnS thin films and solar cells: prospective strategy to obtain large, sintered, and doped SnS grains by recrystallization in the presence of a metal halide flux10.1021/acsami.9b03213 ↗
44. Large anharmonic effect and thermal expansion anisotropy of metal chalcogenides: the case of antimony sulfide10.1103/PhysRevB.92.235202 ↗
45. Lattice dynamics of Sb2Se3 from inelastic neutron and X-ray scattering10.1002/pssb.202000063 ↗
46. Evolution of anisotropic microstructure and residual stress in sputtered Cr films10.1063/1.1521791 ↗
47. Mechanism of controlled crack formation in thin-film dielectrics10.1063/1.1927267 ↗
48. Properties of the CdCl2 air-annealed CSS CdTe thin films
49. Electrical characterization of annealed chemical-bath-deposited CdS films and their application in superstrate configuration CdTe/CdS solar cells
50. Structural and optoelectronic properties of CdCl2 activated CdTe thin films modified by multiple thermal annealing10.1016/j.tsf.2016.09.042 ↗
51. Scheer · 2011
52. On the CdS/CuInSe2 conduction band discontinuity10.1063/1.115523 ↗
53. Natural band alignments and band offsets of Sb2Se3Solar cells10.1021/acsaem.0c01477 ↗
54. Walter · Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions · 1996 · 80 · 4411
55. Sb2S3Seed-Mediated growth of low-defect Sb2S3on a TiO2Substrate for efficient solar cells10.1021/acsaem.0c02400 ↗
56. Intrinsic defect limit to the electrical conductivity and a two-step p-type doping strategy for overcoming the efficiency bottleneck of Sb2S3-based solar cells10.1002/solr.201900503 ↗
57. Origin of photoluminescence from antimony selenide10.1016/j.jallcom.2019.152716 ↗