Role of PC60BM in defect passivation and improving degradation behaviour in planar perovskite solar cells
Source abstract
Abstract
Abstract Titanium oxide (TiO2) is the most commonly employed electron transport layer (ETL) in planar perovskite solar cells (PSCs) structure (FTO/c-TiO2/CH3NH3PbI3/Spiro-OMeTAD/Ag). However, it suffers from defects such as oxygen vacancies and structural defects due to the formation of Ti3+ ions. While defects in TiO2 could play a role in determining the device performance, perovskite layer in PSCs also exhibits traps at interfaces and grain boundaries causing increased recombination losses lowering the power conversion efficiencies (PCE) of the devices. In this manuscript, we demonstrate the use of a thin interlayer of [6, 6]-phenyl-C60-butyric acid methyl ester (PC60BM) as a passivation layer between TiO2 and perovskite layer in planar PSC structure, as analysed using aging and stability studies. The study reveals that the quality of the interface between the constituent layers improves after introduction of PC60BM as passivation layer thus causing an enhancement in the performance of devices. The performance of the devices showed a peculiar behaviour when measured at different times with ~40% enhancement in PCE after 50 h followed by a drop when measured after 150 h. The initial improvement in the device performance was studied using photoluminescence (PL) spectroscopy which showed a blue shift in the emission while impedance spectroscopy measurements showed a significant reduction in charge transfer resistance after 50 h, aided by an improved band alignment as suggested by Kelvin probe force microscopy (KPFM). Further, we show that initiation of degradation in perovskite starts from interface instead of degradation in the bulk of perovskite layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
2. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
3. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
4. Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
5. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells10.1021/nl400349b ↗
6. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
7. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
8. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
9. Ultrathin buffer layers of SnO2 by atomic layer deposition: perfect blocking function and thermal stability10.1021/acs.jpcc.6b09965 ↗
10. Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques10.1021/nn506864k ↗
11. Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO2 layer10.1016/j.nanoen.2016.11.028 ↗
12. Enhancing efficiency and stability of perovskite solar cells through Nb-doping of TiO2 at low temperature10.1021/acsami.7b01063 ↗
13. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
14. Effect of tantalum doping in a TiO2 compact layer on the performance of planar spiro-OMeTAD free perovskite solar cells10.1039/C7TA09193A ↗
15. CH3NH3PbI3 perovskite/fullerene planar‐heterojunction hybrid solar cells10.1002/adma.201301327 ↗
16. The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells10.1039/C3EE43161D ↗
17. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
18. Fast and low temperature growth of electron transport layers for efficient perovskite solar cells10.1039/C4TA06416J ↗
19. Elucidating the roles of TiCl4 and PCBM fullerene treatment on TiO2 electron transporting layer for highly efficient planar perovskite solar cells10.1021/acs.jpcc.7b09537 ↗
20. Isomer‐pure bis‐PCBM‐assisted crystal engineering of perovskite solar cells showing excellent efficiency and stability10.1002/adma.201606806 ↗
21. Effects of interfacial chemical states on the performance of perovskite solar cells10.1039/C5TA08098C ↗
22. Materials processing routes to trap-free halide perovskites10.1021/nl502612m ↗
23. Defects in perovskite-halides and their effects in solar cells10.1038/nenergy.2016.149 ↗
24. Degradation of methylammonium lead iodide perovskite structures through light and electron beam driven ion migration10.1021/acs.jpclett.5b02828 ↗
25. Enhanced photoluminescence and solar cell performance via Lewis base passivation of organic–inorganic lead halide perovskites10.1021/nn5036476 ↗
26. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
27. Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes10.1038/ncomms8081 ↗
28. Passivation in perovskite solar cells: a review10.1016/j.mtener.2018.01.004 ↗
29. Heterojunction modification for highly efficient organic–inorganic perovskite solar cells10.1021/nn505723h ↗
30. Interface engineering of compact-TiOx in planar perovskite solar cells using low-temperature processable high-mobility fullerene derivative10.1016/j.solmat.2018.01.006 ↗
31. Multifunctional fullerene derivative for interface engineering in perovskite solar cells10.1021/jacs.5b10614 ↗
32. Bulk heterojunction perovskite–PCBM solar cells with high fill factor10.1038/nphoton.2016.3 ↗
33. Doping of TiO2 for sensitized solar cells10.1039/C5CS00352K ↗
34. Modeling the interaction of molecular iodine with MAPbI3: a probe of lead-halide perovskites defect chemistry10.1021/acsenergylett.7b01244 ↗
35. Irreversible light-soaking effect of perovskite solar cells caused by light-induced oxygen vacancies in titanium oxide10.1063/1.4994085 ↗
36. Perovskite-based solar cells with inorganic inverted hybrid planar heterojunction structure10.1063/1.5010951 ↗
37. Enhanced detectivity and suppressed dark current of perovskite–InGaZnO phototransistor via a PCBM interlayer10.1021/acsami.8b16346 ↗
38. Hysteresis-free multi-walled carbon nanotube-based perovskite solar cells with a high fill factor10.1039/C5TA07714A ↗
39. Inkjet printing of NiO films and integration as hole transporting layers in polymer solar cells10.1038/s41598-017-01897-9 ↗
40. Improving the photovoltaic performance of perovskite solar cells with acetate10.1038/srep38670 ↗
41. Interfacial degradation of planar lead halide perovskite solar cells10.1021/acsnano.5b03687 ↗
42. Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface10.1039/C6EE03182J ↗
43. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
44. Role of the selective contacts in the performance of lead halide perovskite solar cells10.1021/jz500059v ↗
45. Microscopic investigations into the effect of surface treatment of cathode and electron transport layer on the performance of inverted organic solar cells10.1021/acsami.5b03583 ↗
46. Enhanced efficiency and thermal stability of mesoscopic perovskite solar cells by adding PC70BM acceptor10.1016/j.solmat.2019.110130 ↗
47. Degradation of encapsulated perovskite solar cells driven by deep trap states and interfacial deterioration10.1039/C7TC03733C ↗