journal article·2019-05

Enabling the measurement of thermomechanical stress in solar cells and PV modules by confocal micro-Raman spectroscopy

Andreas J. Beinert, Andreas Büchler, Pascal Romer, Viola Haueisen, Li Carlos Rendler, Martin C. Schubert, Martin Heinrich, Jarir Aktaa, Ulrich Eitner

Publisher page

Abstract

Abstract Understanding the origin of thermomechanical stress in solar cells is a key factor to extend the lifetime of photovoltaic modules. However, the methods to determine the stress are very limited. With the confocal micro-Raman spectroscopy, we present a contactless method, which is able to measure through the front glass and is well-known in the field of microelectronics. One major challenge for the measurement on crystalline silicon solar cells and modules is the surface texturization of the mono crystalline solar cell, which changes the topology from a plain (100) surface to pyramids with (111) flanks and (100) valleys. We develop a procedure to cover the challenges arising from this topology, namely the inhomogeneous stress distribution on the pyramid flanks and the different crystal planes of the phonon vibrations and the photon back scattering. By studying the procedure on a reference system, we determine a factor for the conversion of a micro-Raman peak shift to stress of Σ = − ( 833 ± 49 ) MPa / rel . cm − 1 . The presented measurements show that the factor holds for uniaxial stress, biaxial stress as well as the stress states occurring from the PV module production processes. We then apply the procedure to measure the stress from soldering 156 × 156 mm2 solar cells and the lamination. We obtain (− 21 ± 2) MPa for the stress in the unsoldered solar cells, which arise from the cell production steps, like metallization. After soldering, we measure (− 26 ± 3) MPa and after lamination (− 53 ± 6) MPa. Additionally we perform a line scan along the cell diagonal and area scans of the quarter cell as well as the end of one busbar. All results match well with a simulation of stress induced by the soldering process and lamination using the finite element method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. M. Köntges, S. Altmann, T. Heimberg, U. Jahn, K.A. Berger, Mean degradation rates in PV systems for various kinds of PV module failures, in: Proceedings of the 32nd European Photovoltaic Solar Energy Conference and Exhibition, Munich, Germany, 2016, pp. 1435–1443.
2. C. Kohn, T. Faber, R. Kübler, J. Beinert, G. Kleer, F. Clement, D. Erath, I. Reis, F. Martin, A. Müller, Analyses of warpage effects induced by passivation and electrode coatings in silicon solar cells, in: Proceedings of the 22nd European Photovolatic Solar Energy Conference and Exhibition, Milan, Italy, 2007, pp. 1270–1273.
3. S. Dietrich, M. Pander, M. Sander, M. Ebert, Mechanical investigations on metallization layouts of solar cells with respect to module reliability, in: Proceedings of the 3rd International Conference on Crystalline Silicon Photovoltaics (SiliconPV 2013), 38(0), 203, pp. 488–497. 〈https://doi.org/10.1016/j.egypro.2013.07.308〉.10.1016/j.egypro.2013.07.308 ↗
4. C. Kohn, R. Kübler, M. Krappitz, G. Kleer, I. Reis, M. Retzlaff, D. Erath, D. Biro, Influence of the metallization process on the strength of silicon solar cells, 21, 2009. 〈https://doi.org/10.4229/24thEUPVSEC2009-2CV.2.4〉.
5. Y. Zemen, T. Prewitz, T. Geipel, S. Pingel, J. Berghold, The impact of yield strength of the interconnector on the internal stress of the solar cell within a module, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition/ 5th World Conference on Energy Conversion, Valencia, Spain, 2010, pp. 4073–4078.
6. R. Meier, M. Pander, R. Klengel, S. Dietrich, S. Klengel, M. Ebert, J. Bagdahn, N.G. Dhere, J.H. Wohlgemuth, K.W. Lynn, Reduction of soldering induced stresses in solar cells by microstructural optimization of copper-ribbons, in: Proceedings of the SPIE Solar Energy + Technology, San Diego, California, SPIE, 2011, pp. 1–13.10.1117/12.893519 ↗
7. L.C. Rendler, A. Kraft, C. Ebert, S. Wiese, U. Eitner, Investigation of thermomechanical stress in solar cells with multi busbar interconnection by finite element modeling, in: Proceedings of the 32nd European Photovoltaic Solar Energy Conference and Exhibition, Munich, Germany, 2016, pp. 94–98.10.1109/EuroSimE.2016.7463325 ↗
8. Thermomechanical stress in solar cells: contact pad modeling and reliability analysis10.1016/j.solmat.2019.03.041 ↗
9. A.M. Gabor, Soldering induced damage to thin si solar cells and detection of crackes cells in modules, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference and Exhibition, Dresden, Germany, 2006, pp. 2042–2047.
10. J. Wendt, M. Traeger, M. Mette, A. Pfennig, B. Jaeckel, The link between mechanical stress induced by soldering and micro damages in silicon solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2009, pp. 3420–3423.
11. Thermal stress and strain of solar cells in photovoltaic modules
12. S. Dietrich, M. Pander, M. Sander, S.-H. Schulze, M. Ebert, Mechanical and thermo-mechanical assessment of encapsulated solar cells by finite-element-simulation, in: Proceedings of the SPIE Solar Energy and Technology, San Diego, California, USA, 2010.10.1117/12.860661 ↗
13. Effect of interconnect geometry on the evolution of stresses in a solar photovoltaic laminate during and after lamination10.1016/j.solmat.2018.07.026 ↗
14. Lee Yixian, A.A.O. Tay, Finite element thermal stress analysis of a solar photovoltaic module, Photovoltaic Specialists Conference (PVSC), 2011 37th IEEE, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), IEEE PVSC 2011, Seattle, WA, 2011.10.1109/PVSC.2011.6186616 ↗
15. A.J. Beinert, M. Ebert, U. Eitner, J. Aktaa, Influence of photovoltaic module mounting systems on the thermo-mechanical stresses in solar cells by FEM modelling, in: Proceedings of the 32nd European Photovoltaic Solar Energy Conference and Exhibition, Munich, Germany, 2016, pp. 1833–1836.
16. A.J. Beinert, R. Leidl, P. Sommeling, U. Eitner, J. Aktaa, FEM-based development of novel back-contact PV modules with ultra-thin solar cells, in: Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, 2017, pp. 42–47.
17. Probing stress and fracture mechanism in encapsulated thin silicon solar cells by synchrotron X-ray microdiffraction10.1016/j.solmat.2016.12.028 ↗
18. Probing phase transformations and microstructural evolutions at the small scales: synchrotron X-ray microdiffraction for advanced applications in 3D IC (integrated circuits) and solar PV (Photovoltaic) devices10.1007/s11664-016-5012-5 ↗
19. Enabling thin silicon technologies for next generation c-Si solar PV renewable energy systems using synchrotron X-ray microdiffraction as stress and crack mechanism probe10.1016/j.solmat.2014.07.029 ↗
20. From cells to laminate: probing and modeling residual stress evolution in thin silicon photovoltaic modules using synchrotron X-ray micro-diffraction experiments and finite element simulations10.1002/pip.2891 ↗
21. Quantitative mapping of deflection and stress on encapsulated silicon solar Cells10.1109/JPHOTOV.2017.2768959 ↗
22. X. Meng, M. Stuckelberger, L. Ding, B. West, A. Jeffries, M. Bertoni, Characterization of encapsulated solar cells by x-ray topography, in: Proceedings of the 2016 IEEE 43rd Photovoltaic Specialists Conference (PVSC): 5–10 June 2016, Portland, OR, USA, IEEE, [Piscataway, NJ], 2016, pp. 111–114.10.1109/PVSC.2016.7749559 ↗
23. Effect of static uniaxial stress on the Raman spectrum of silicon10.1016/0038-1098(70)90588-0 ↗
24. A lattice theory of morphic effects in crystals of the diamond structure10.1016/0003-4916(70)90029-1 ↗
25. Micro-Raman spectroscopy to study local mechanical stress in silicon integrated circuits10.1088/0268-1242/11/2/001 ↗
26. Schmid · 2010
27. W. Mühleisen, J. Schicker, L. Neumaier, C. Hirschl, N. Vollert, S. Seufzer, R. Battistutti, M. Pedevilla, J. Scheurer, M. Schwark, T. Fischer, Stress measurements in interconnected solar cells with Raman spectroscopy, in: Proceedings of the 31st European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2015, pp. 160–163.
28. Comprehensive microscopic analysis of laser-induced high doping regions in silicon10.1109/TED.2011.2158649 ↗
29. Zur Quantentheorie der Dispersion10.1007/BF01576902 ↗
30. A new radiation10.1007/BF03052651 ↗
31. Enabling stress determination on alkaline textured silicon using Raman spectroscopy10.1016/j.egypro.2017.09.333 ↗
32. Thermomechanical stress analysis of PV module production processes by Raman spectroscopy and FEM simulation10.1016/j.egypro.2017.09.282 ↗
33. Thermal expansion reference data: silicon 300–850 K10.1088/0022-3727/14/10/003 ↗
34. Thermal expansion reference data: silicon 80–280 K10.1088/0022-3727/15/9/004 ↗
35. S. Wiese, F. Kraemer, E. Peter, J. Seib, Mechanical problems of novel back contact solar modules, in: Proceedings of the 13th IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, Cascais, Portugal, 2012, pp. 1–6.10.1109/ESimE.2012.6191770 ↗
36. U. Eitner, M. Pander, S. Kajari-Schroeder, M. Koentges, H. Altenbach, Thermomechanics of PV modules including the viscoelasticity of EVA, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2011, pp. 3267–3269.