The role of donor polymer and PEDOT:PSS formulation on adhesion processes in inverted organic solar cells
Source abstract
Abstract
Organic photovoltaic devices (OPVs) are one of the most promising applications of organic semiconductors due to their compatibility with flexible plastic substrates resulting in lightweight, inexpensive, ergonomic and aesthetic products. While the electrical failure mechanisms in OPVs have been thoroughly investigated, little is known about their mechanical stability, which is as important and critical to ensure long term reliability. The characteristic thin films stresses of each layer present in organic solar cells, in combination with other possible fabrication, handling and operational stresses, provide the mechanical driving force for delamination of weak interfaces or even their decohesion, leading to a loss of device integrity and performance. In this study, we developed a technique to probe weak layers or interfaces in inverted polymer:PC60BM solar cells, establishing a new set-up for the so-called probe tack making it similar to a pull-off test. With this in hand, the adhesion of a variety of active layers towards a standard water-based poly(ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) formulation was compared against that of a new organic-solvent based PEDOT:PSS. The organic-solvent based PEDOT:PSS formulation showed improved adhesion compared to the standard water-based formulation. Chemical characterization of the exposed surfaces indicated a difference in their composition, suggesting a stronger interaction of the organic-solvent based PEDOT:PSS with the active layer and resulting in a different fracture path. Indeed, all OPVs with water-based PEDOT:PSS showed a delamination localized at the active layer/PEDOT:PSS interface, while those with the organic-solvent formulation were not fractured at this interface but rather, in the active layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Stability of polymer solar cells10.1002/adma.201104187 ↗
2. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
3. Accelerated testing and failure of thin-film PV modules10.1002/pip.526 ↗
4. Adhesion and debonding of multi-layer thin film structures10.1016/S0013-7944(98)00052-6 ↗
5. Abdallah · 2007
6. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
7. Optimal negative electrodes for poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices10.1063/1.2841067 ↗
8. Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics10.1016/j.solmat.2010.12.036 ↗
9. In situ energy dispersive x-ray reflectometry measurements on organic solar cells upon working10.1063/1.2128069 ↗
10. Controlling photoinduced degradation in plastic photovoltaic cells: a time-resolved energy dispersive x-ray reflectometry study10.1063/1.2227772 ↗
11. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
12. Pathways for the degradation of organic photovoltaic P3HT:pcbm based devices10.1016/j.solmat.2008.01.020 ↗
13. S.R. Dupont, E. Voroshazi, P. Heremans, R.H. Dauskardt, The Effect of Anneal, Solar Irradiation and Humidity on the Adhesion/Cohesion Properties of P3HT:PCBM Based Inverted Polymer Solar Cells, in: pp. 003259–003262. doi:10.1109/PVSC.2012.6318272.10.1109/PVSC.2012.6318272 ↗
14. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
15. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
16. Adhesion properties of inverted polymer solarcells: processing and film structure parameters
17. Controlling interdiffusion, interfacial composition, and adhesion in polymer solar cells10.1002/admi.201400135 ↗
18. Cohesion and device reliability in organic bulk heterojunction photovoltaic cells10.1016/j.solmat.2011.11.035 ↗
19. A molecular-scale understanding of cohesion and fracture in P3HT: fullerene blends10.1021/acsami.5b02202 ↗
20. Film stresses and electrode buckling in organic solar cells10.1016/j.solmat.2012.04.003 ↗
21. Decohesion kinetics of PEDOT:PSS conducting polymer films10.1002/adfm.201302174 ↗
22. D4541-09: standard test method for pull-off strength of coatings using portable adhesion
23. Non-aqueous PEDOT: PSS dispersion for improved inverted organic solar cells10.1557/opl.2015.521 ↗
24. Roncin · 2011
25. National Institutes of Health, Open Source under Title 17, Sect. 105 USA Code. (n.d.).
26. Morphology and interdiffusion control to improve adhesion and cohesion properties in inverted polymer solar cells10.1016/j.solmat.2014.09.013 ↗
27. Seah · 1979 · 46
28. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
29. Comparative study of the modelling of the spectral background of photoelectron spectra with the Shirley and improved Tougaard methods10.1016/j.elspec.2013.01.020 ↗