Effect of argon plasma-treated polyethylene terepthalate on ZnO:Al properties for flexible thin film silicon solar cells applications
Source abstract
Abstract
The 0.4 μm-thick Aluminum-doped Zinc Oxide (ZnO:Al) films were deposited at 100°C on polyethylene terephthalate (PET) substrates by Radio Frequency (RF) magnetron sputtering. Prior to the AZO deposition, an Argon plasma treatment on the substrate surface was carried out by applying a RF bias power on it without intentional heating. The parameters varied in the etching process were the plasma etching time from 0 to 360 s, the RF bias power from 50 to 250W, and the gas flux from 3 to 5 sccm. The effect of the substrate surface treatment on the mechanical stability, crystallinity and the optoelectronic properties of ZnO:Al thin films were evaluated. The results showed physically stable ZnO:Al films with good adherence to the substrate using appropriated plasma treatment parameters. This fact was attributed to physico/chemical PET surface modifications on the first few molecular layers after the plasma irradiation. The performance of flexible solar devices fabricated on optimized ZnO:Al thin films with adequate adhesion and optoelectronic properties was analysed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Low-temperature deposition of ZnO thin films on PET and glass substrates by DC-sputtering technique10.1016/j.tsf.2005.08.258 ↗
2. Optimization of aluminum-doped zinc oxide films deposited at low temperature by radio-frequency sputtering on flexible substrates for solar cell applications10.1016/j.solmat.2009.08.012 ↗
3. Room temperature deposition of alumina-doped zinc oxide on flexible substrates by direct pulsed laser recrystallization
4. Influence of various thickness metallic interlayers on opto-electric and mechanical properties of AZO thin films on PET substrates10.1016/j.apsusc.2011.12.016 ↗
5. J.D. Santos, S. Fernández, J. Cárabe, J.J. Gandía, Application of AZO buffer layer on commercial PET/ITO substrates to improve the mechanical stability of flexible a-Si:H solar cells, in:Proceedings of 27th European Photovoltaic Solar Energy Conference (EU PVSEC), Frankfurt, Germany, 2012, pp. 2726-2729.
6. Mechanical properties of ZnO thin films deposited on polyester substrates used in flexible device applications10.1016/j.tsf.2010.07.081 ↗
7. Transparent conductive Al-doped ZnO films for liquid crystal displays
8. Mechanics of thin-film transistors and solar cells on flexible substrates10.1016/j.solener.2005.10.010 ↗
9. Atomic layer deposited ZnO:Al for nanostructured silicon heterojunction solar cells10.1016/j.solmat.2012.04.004 ↗
10. A study of crystallinity in amorphous Si thin films for silicon heterojunction solar cells10.1016/j.solmat.2010.04.056 ↗
11. Preparation of transparent ZnO thin films and their application in UV sensor devices10.1016/j.sse.2012.03.004 ↗
12. Preparation of Al-doped ZnO transparent electrodes suitable for thin-film solar cell applications by various types of magnetron sputtering depositions10.1016/j.tsf.2011.10.003 ↗
13. Structural, electrical and optical properties of sol–gel AZO thin films10.1016/j.cap.2008.06.006 ↗
14. Low pressure chemical vapor deposition of aluminum-doped zinc oxide for transparent conducting electrodes10.1149/1.3599055 ↗
15. Structural, electrical and optical properties of ZnO:Al films deposited on flexible organic substrates for solar cell applications10.1016/j.tsf.2006.12.099 ↗
16. Transparent conductive ZnO:Al thin films deposited on flexible substrates prepared by direct current magnetron sputtering10.1016/j.tsf.2005.09.110 ↗
17. Physical properties of Al-doped ZnO films deposited on nonwoven substrates by radio frequence magnetron sputtering10.1007/s11998-008-9087-7 ↗
18. Thickness-dependent fracture behaviour of flexible ZnO:Al thin films
19. Plasma modification of polymer surfaces for achesion improvement10.1147/rd.384.0423 ↗
20. Studies on modification of surface properties in polycarbonate (PC) film induced by DC glow discharge plasma
21. Plasma-surface modification of biomaterials10.1016/S0927-796X(02)00004-9 ↗
22. Plasma treatment of polymer surfaces in different gases
23. Surface modification of polycarbonate by plasma treatment
24. Modification of polyester and polyamide fabrics by different in situ plasma polymerization methods
25. Surface characterization of plasma treated polymers for applications as biocompatible carriers10.3144/expresspolymlett.2013.50 ↗
26. Argon and oxygen sputter etching of polystyrene, polypropylene, and poly(ethylene terephthalate) thin films10.1116/1.575013 ↗
27. Chemical and physical sputtering of polyethylene terephthalate (PET)10.1002/ppap.201200094 ↗
28. Surface modification of PET films by pulsed argon plasma10.1002/app.10865 ↗
29. Investigation on polymer anode design for flexible polymer solar cells
30. Structural and optoelectronic properties of Al-doped zinc oxide films deposited on flexible substrates by radio frequency magnetron sputtering10.1016/j.tsf.2011.05.017 ↗
31. In situ measurement of mechanical stress in polycrystalline zinc-oxide thin films prepared by magnetron sputtering10.1063/1.1288162 ↗
32. Al-doped zinc oxide films deposited by simultaneous rf and dc excitation of a magnetron plasma: relationships between plasma parameters and structural and electrical film properties10.1063/1.366798 ↗
33. WSXM: a software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
34. Resolution enhancement and improved data interpretation in electrostatic force microscopy10.1103/PhysRevB.64.245403 ↗
35. www.next-tip.com.
36. Aspect-ratio and lateral-resolution enhancement in force microscopy by attaching nanoclusters generated by an ion cluster source at the end of a silicon tip10.1063/1.3556788 ↗
37. Strong localization in InGaN layers with high indium content grown by molecular-beam epitaxy10.1063/1.1432751 ↗
38. J.D. Santos, Desarrollo y caracterización de dispositivos fotovoltaicos p-i-n de silicio amorfo depositados por PECVD, Ph.D. Thesis, 〈http://eprints.ucm.es/17966〉, 2012.
39. J.L. Balenzategui, J. Cuenca, I. Rodriguez-Outón, F. Chenlo, Intercomparison and validation of solar cell I–V characteristic measurement procedures, in: Proceedings of 27th European Photovoltaic Solar Energy Conference (EU PVSEC), Frankfurt, Germany, 2012, pp. 1474-1476.
40. Influence of argon plasma on the deposition of Al2O3 film onto the PET surfaces by atomic layer deposition
41. Chemical modifications of PET induced by swift heavy ions10.1016/S0168-583X(97)00364-9 ↗
42. Orientation and relaxation in thick poly(ethylene terephtalate) films by transmission infrared linear dichroism10.1366/0003702021954386 ↗
43. S. Kitova, V. Strijkova, G. Danev, The effect of RF plasma treatment on the surface activation of polycarbonate substrate, in: 36th Conference on Plasma Physics. Sofia, vol. 33, 2009, p-1.082.
44. Structural and optical investigations of radiation damage in transparent PET polymer films
45. Pyrolitic effects induced by energetic ions in polymers10.1016/S0168-583X(99)00093-2 ↗
46. Modification of polyethylene terephtalate under high-energy heavy ion irradiation10.1016/S0168-583X(02)00641-9 ↗
47. Radio frequency sputter deposition of high-quality conductive and transparent ZnO:Al films on polymer substrates for thin film solar cells applications10.1016/j.tsf.2008.11.097 ↗
48. Internal stress and surface morphology of zinc oxide thin films deposited by filtered cathodic vacuum arc technique10.1016/j.tsf.2003.11.167 ↗
49. Stress and structural studies of ZnO thin films on polymer substrate under different RF powered conditions10.1016/j.matlet.2009.08.027 ↗
50. Crystallinity improvement of ZnO thin film by hierarchical thermal annealing
51. Structural origins of intrinsic stress in amorphous silicon thin films
52. Aluminum-doped zinc oxide films as transparent conductive electrode for organic light-emitting devices10.1063/1.1605805 ↗
53. Diagnostics of thin-film silicon solar cells and solar panels/modules with variable intensity measurements (VIM)10.1016/j.solmat.2010.04.070 ↗
54. Cause of the fill factor loss of a-Si:H p-i-n devices with ZnO:Al front electrode: blocking contact vs. defect density.10.1016/j.tsf.2013.09.078 ↗