Experimental study on burning and toxicity hazards of a PET laminated photovoltaic panel
Source abstract
Abstract
Abstract Currently, photovoltaics have been used on a large scale for commercial and civilian use. Aging short circuit, fire and other reasons will bring great security risks. In this paper, an experimental study of burning and toxic hazards was carried out on a widely used, flammable photovoltaic panel with a sample size of 180 mm*180 mm at atmospheric conditions. Combustion experiments were performed on the early stage fire characteristics bench of State Key Laboratory of Fire Science in China. Several important combustion parameters were investigated by oxygen consumption method under four representative external thermal (15 kW/m2,20 kW/m2,30 kW/m2,40 kW/m2), including Ignition Time, Heat Release Rate, Mass Loss Rate and Total Heat of Combustion. The results of experimental combustion heat were consistent with the thermodynamic calculation data of various organic matter in the sample. Several dangerous toxic gases have been detected, such as sulfur dioxide, hydrogen fluoride, hydrogen cyanide and a small amount of VOCs, of which the concentration of sulfur dioxide is relatively high. In the case of higher external radiant heat, there is a higher risk.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire dynamics and safety research · Combustion and Detonation Processes · Fire Detection and Safety Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Editorial: the need of an international photovoltaic quality assurance task force10.1063/1.4884196 ↗
2. Top PV market solar cells 201610.1016/j.opelre.2017.03.002 ↗
3. Fire hazard and other safety concerns of PV systems
4. Experimental studies on the flammability and fire hazards of photovoltaic modules10.3390/ma8074210 ↗
5. Experimental study on burning behaviors of photovoltaic panels with different coverings using a cone calorimeter10.1063/1.4990830 ↗
6. A study on fire behaviour of combustible components of two commonly used photovoltaic panels10.1002/fam.2366 ↗
7. Combustion behaviors of CIGS thin-film solar modules from cone calorimeter tests10.3390/ma11081353 ↗
8. Public health issues in photovoltaic energy systems: an overview of concerns10.1016/0379-6787(87)90084-6 ↗
9. Thin-film photovoltaic cells - health and environmental-issues in their manufacture, use and disposal10.1002/pip.4670030504 ↗
10. Toxic materials released from photovoltaic modules during fires: health risks10.1016/0379-6787(90)90015-W ↗
11. 2015 Reaction-to-fire tests–Heat release, smoke production and mass loss rate-Part 1: heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
12. Fire tests—full scale room test for surface products
13. Y. Peng, X. Zhou, Y. Hu, X. Ju, B. Liao, L. Yang, A new exploration of the fire behaviors of large format lithium ion battery, J. Therm. Anal. Calorim.. (n.d.) 1–12..
14. Ignition handbook: principles and applications to fire safety engineering, fire investigation, risk manag
15. A theoretical basis for flammability properties10.1002/fam.905 ↗
16. Predicting the piloted ignition of wood in the cone calorimeter using an integral model — effect of species, grain orientation and heat flux10.1016/S0379-7112(00)00055-2 ↗
17. Yang · 2015 · 4210
18. Characterization of thermal properties and analysis of combustion behavior of PMMA in a cone calorimeter10.1016/j.firesaf.2011.07.005 ↗
19. Heat release rate: the single most important parameter in fire hazard10.1016/0379-7112(92)90019-9 ↗
20. Flammability Parameters of Materials : Ignition , Combustion , and Fire Propagation *10.1177/073490419401200401 ↗
21. Thermal degradation of poly (ethylene terephthalate): a kinetic analysis of thermogravimetric data10.1002/app.1983.070280918 ↗
22. Thermal and pyrolysis studies of copolyesters10.1002/pol.1982.170200929 ↗
23. The degradation of poly (ethylene terephthalate)10.1002/anie.196801821 ↗
24. Surface modification of HDPE, PP, and PET films with KMnO4/HCl solutions10.1016/j.polymdegradstab.2007.04.005 ↗
25. 2011
26. ISO 19703-2010, International Standard, 2010. https://doi.org/10.5594/J09750..
27. Specimen heat fluxes for bench‐scale heat release rate testing10.1002/fam.810190602 ↗
28. Fire deaths in the United Kingdom 1976‐8210.1002/fam.810070204 ↗
29. Burgess · 1979
30. ISO 13571 · 2012
31. Toxic hazard calculation models for use with fire effluent data
32. Toxic combustion product yields as a function of equivalence ratio and flame retardants in under-ventilated fires: bench-large-scale comparisons10.3390/polym8090330 ↗