journal article·2019-01

Understanding lead iodide perovskite hysteresis and degradation causes by extensive electrical characterization

Antonio Rizzo, Francesco Lamberti, Marco Buonomo, Nicola Wrachien, Lorenzo Torto, Nicolò Lago, Simone Sansoni, Roberto Pilot, Mirko Prato, Nicolò Michieli, Moreno Meneghetti, Gaudenzio Meneghesso, Andrea Cester

Publisher page

Abstract

Abstract We studied the hysteresis and electric field effects on planar CH3NH3PbI3 perovskite devices, synthetized from laser-ablated precursors, by means of electrical characterizations at different scan rates and optical measurements. The aim of our investigation is to characterize the phenomena behind perovskite degradation under prolonged applied electric field. Using a perovskite more resistant to electric field induced degradation, we run long time characterizations that were not accomplishable before. Thus, we distinguished all the degradation-involved phenomena. The results point to the presence of ions migrating in the perovskite when the device is biased. Our data showed that ion migration degrades the interfaces with the consequent creation of degradation layers that limit the current injected in the device and the extracted photocurrent. These layers where detected also by means of optical Raman characterization. In order to explain the details of the mechanisms concurring to the observed behaviors, we presented a qualitative model. The observed phenomena exacerbated by the planar structure are even more destructive on standard solution processed perovskites to which the results of this work can be extended. Since, the same degradation dynamics occur on vertical devices, typical on perovskite solar cells, this work provides a useful in-depth analysis of the ionic migration effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Best research-cell efficiencies, 57] MA green," corrigendum to sol. cell effic. tables (version 46)[Prog.
3. The efficiency limit of CH3 NH3 PbI 3 perovskite solar cells10.1063/1.4922150 ↗
4. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
5. Tunable optical properties and charge separation in CH3 NH3 Snx Pb1–x I3/TiO 2 -based planar perovskites cells10.1021/jacs.5b04015 ↗
6. Tuning the optical properties of cesium lead halide perovskite nanocrystals by anion exchange reactions10.1021/jacs.5b05602 ↗
7. Perovskite-based photodetectors: materials and devices10.1039/C6CS00896H ↗
8. J.H.L. Ngai, J.K.W. Ho, R.K.H. Chan, S.H. Cheung, L.M. Leung, S.K. So, Growth, Characterization, and Thin Film Transistor Application of CH3 NH3 PbI3 Perovskite on Polymeric Gate Dielectric Layers, (n.d.). 〈http://dx.doi.org/10.1039/c7ra08699g〉.10.1039/C7RA08699G ↗
9. Green perovskite distributed feedback lasers10.1038/s41598-017-11569-3 ↗
10. Advances in small perovskite-based lasers10.1002/smtd.201700163 ↗
11. Organic–inorganic hybrid perovskite nanowire laser arrays10.1021/acsnano.7b01351 ↗
12. Perovskite light-emitting diodes via laser crystallization: systematic investigation on grain size effects for device performance10.1021/acsami.7b15470 ↗
13. Perovskite photonic sources10.1038/nphoton.2016.62 ↗
14. Toward large scale roll-to-roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
15. Upscaling of perovskite solar cells: fully ambient roll processing of flexible perovskite solar cells with printed back electrodes10.1002/aenm.201500569 ↗
16. High efficiency photovoltaic module based on mesoscopic organometal halide perovskite10.1002/pip.2557 ↗
17. Flexible perovskite photovoltaic modules and solar cells based on atomic layer deposited compact layers and UV-irradiated TiO2 scaffolds on plastic substrates10.1002/aenm.201401808 ↗
18. Flexible and organic neural interfaces: a review10.3390/app7121292 ↗
19. A. Rizzo, L. Ortolan, S. Murrone, L. Torto, M. Barbato, N. Wrachien, et al., Effects of thermal stress on hybrid perovskite solar cells with different encapsulation techniques, in: Proceedings of the 2017 IEEE International Reliab. Phys. Symp., IEEE: pp. PV-1.1-PV-1.6. 〈http://dx.doi.org/10.1109/IRPS.2017.7936396〉.10.1109/IRPS.2017.7936396 ↗
20. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
21. Best practices in perovskite solar cell efficiency measurements. Avoiding the error of making bad cells look good10.1021/acs.jpclett.5b00289 ↗
22. In situ observation of heat-induced degradation of perovskite solar cells10.1038/nenergy.2015.12 ↗
23. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
24. Effects of thermal and electrical stress on DH4T-based organic thin-film-transistors with PMMA gate dielectrics10.1016/j.microrel.2015.06.073 ↗
25. Characterization and modeling of organic (P3HT:PCBM) solar cells as a function of bias and illumination10.1016/j.solmat.2016.06.001 ↗
26. A. Rizzo, A. Cester, L. Torto, M. Barbato, N. Wrachien, N. Lago, et al., Effects of current stress and thermal storage on polymeric heterojunction P3HT:PCBM solar cell, in: IEEE International Reliab. Phys. Symp. Proceedings, Institute of Electrical and Electronics Engineers Inc., Pasadena – CA: pp. 3C21–3C26. 〈http://dx.doi.org/10.1109/IRPS.2016.7574523〉.10.1109/IRPS.2016.7574523 ↗
27. Application of photocurrent model on polymer solar cells under forward bias stress10.1109/JPHOTOV.2016.2603841 ↗
28. Improvement of the humidity stability of organic–inorganic perovskite solar cells using ultrathin Al2O3 layers prepared by atomic layer deposition10.1039/C4TA06128D ↗
29. Encapsulation for long-term stability enhancement of perovskite solar cells10.1016/j.nanoen.2016.09.041 ↗
30. Interfacial morphology addresses performance of perovskite solar cells based on composite hole transporting materials of functionalized reduced graphene oxide and P3HT10.1002/solr.201800013 ↗
31. Interpretation of optoelectronic transient and charge extraction measurements in dye-sensitized solar cells10.1002/adma.201201372 ↗
32. Hybrid organic-inorganic perovskite memory with long-term stability in air10.1038/s41598-017-00778-5 ↗
33. Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresis10.1038/ncomms13831 ↗
34. Giant switchable photovoltaic effect in organometal trihalide perovskite devices10.1038/nmat4150 ↗
35. Solar cells: ion migration and the role of preconditioning cycles in the stabilization of the J-V characteristics of inverted hybrid perovskite solar cells10.1002/aenm.201501453 ↗
36. Kinetics of ion transport in perovskite active layers and its implications for active layer stability10.1021/jacs.5b08535 ↗
37. Modeling anomalous hysteresis in perovskite solar cells10.1021/acs.jpclett.5b01645 ↗
38. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
39. Direct observation of ferroelectric domains in solution-processed CH3 NH3 PbI3 perovskite thin films10.1021/jz501697b ↗
40. Ferroelectric materials for solar energy conversion: photoferroics revisited10.1039/C4EE03523B ↗
41. Re-entrant relaxor ferroelectricity of methylammonium lead iodide10.1016/j.cap.2016.09.016 ↗
42. Ferroelectric domain wall induced band gap reduction and charge separation in organometal halide perovskites10.1021/jz502666j ↗
43. Hysteresis-less inverted CH3 NH3 PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
44. Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency10.1039/C6EE01037G ↗
45. C 60 as an efficient n-type compact layer in perovskite solar cells10.1021/acs.jpclett.5b00902 ↗
46. Functionalization of transparent conductive oxide electrode for TiO 2 -free perovskite solar cells10.1039/C7TA02405C ↗
47. The Renaissance of fullerenes with perovskite solar cells10.1016/j.nanoen.2017.09.016 ↗
48. High-quality, ligands-free, mixed-halide perovskite nanocrystals inks for optoelectronic applications10.1002/aenm.201601703 ↗
49. F. Lamberti, A. Rizzo, E. Cescon, R. Sorrentino, L. Litti, J. Reguera, et al., Suppression of Ionic Motions in a Perovskite Thin Film for Opto-electronic Applications (Submitted).
50. Pitfalls in measuring work function using photoelectron spectroscopy10.1016/j.apsusc.2009.11.002 ↗
51. A physical-based equivalent circuit model for an organic/electrolyte interface10.1016/j.orgel.2016.05.018 ↗
52. Controlling the dimensionality of charge transport in organic thin-film transistors10.1073/pnas.1107063108 ↗
53. Steady-state and transient behavior of organic electrochemical transistors10.1002/adfm.200601239 ↗
54. Light-emitting electrochemical cells: recent progress and future prospects10.1016/j.mattod.2014.04.029 ↗
55. Non-ferroelectric nature of the conductance hysteresis in CH 3 NH 3 PbI 3 perovskite-based photovoltaic devices10.1063/1.4919109 ↗
56. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
57. Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite films10.1039/C6EE00413J ↗
58. Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications10.1039/c3ta10518k ↗
59. Probing the energy levels of perovskite solar cells via Kelvin probe and UV ambient pressure photoemission spectroscopy10.1039/C6CP02446G ↗
60. The work function of few-layer graphene10.1088/0953-8984/29/3/035003 ↗
61. Angle-resolved ultraviolet photoelectron spectroscopy of the unoccupied band structure of graphite10.1103/PhysRevB.32.8317 ↗
62. Optoelectronic studies of methylammonium lead iodide perovskite solar cells with mesoporous TiO210.1021/jacs.5b00761 ↗
63. Challenges in the ambient Raman spectroscopy characterization of methylammonium lead triiodide perovskite thin films10.1007/s12200-016-0573-8 ↗
64. The Raman spectrum of the CH 3 NH 3 PbI 3 hybrid perovskite: interplay of theory and experiment10.1021/jz402589q ↗
65. Interface vibrational modes in layered crystals with stacking faults10.1016/S0022-2860(96)09376-3 ↗
66. Raman study of three polytypes of PbI210.1002/jrs.1250130206 ↗
67. Optical and structural properties of PbI2 thin films10.1007/s10853-007-1854-9 ↗
68. Efficient blue-green and white light-emitting electrochemical cells based on poly[9,9-bis(3,6-dioxaheptyl)-fluorene-2,7-diyl]10.1063/1.364313 ↗
69. Light-induced reactivity of gold and hybrid perovskite as a new possible degradation mechanism in perovskite solar cells10.1039/C7TA10217H ↗
70. Local time-dependent charging in a perovskite solar cell10.1021/acsami.6b04104 ↗
71. Molecular level alignment at organic semiconductor-metal interfaces10.1063/1.121940 ↗
72. Energy level alignment at interfaces of organic semiconductor heterostructures10.1063/1.368864 ↗
73. Energy level alignment of poly(3-hexylthiophene): [6,6]-phenyl C[sub 61] butyric acid methyl ester bulk heterojunction10.1063/1.3163056 ↗