journal article·2018-06Open access

Scanning photocurrent microscopy of 3D printed light trapping structures in dye-sensitized solar cells

Andrew Knott, Oleg Makarovskiy, James O’Shea, Yupeng Wu, Chris Tuck

Abstract

Converting solar energy directly into electricity as a clean and renewable energy resource is immensely important to solving the energy crisis and environmental pollution problems induced by the consumption of fossil fuels. Dye-sensitized solar cells (DSSCs) provide a technically and economically credible alternative that could challenge the dominance of conventional p-n junction photovoltaic devices in the solar energy market. DSSCs use dye molecules adsorbed at the surface of nanocrystalline oxide semiconductors such as TiO2 to collect sunlight. These thin films require a large surface area, to adsorb many dye molecules, and mesoporous channels so the electrolyte can permeate the film and regenerate the dye molecules. This favourable morphology is traditionally achieved by the random assembly of a network of nanoparticles by the sintering process. Two-photon polymerization is a 3D printing technique used to fabricate structures with feature resolutions down to 100 nm. We use this technique to fabricate TiO2 thin films of optimised 3D micro-design for use in DSSCs. Our films have a considerable advantage over the conventional (random assembly) films as it allows the implementation of light scattering designs which are shown to significantly enhance photocurrent in the cell by up to ~25%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye- sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Dye-sensitized solar cells10.1016/S1389-5567(03)00026-1 ↗
3. Dye-sensitized solar cells10.1021/cr900356p ↗
4. Highly efficient dye-sensitized solar cells: progress and future challenges10.1039/c3ee24453a ↗
5. A. Jena, S.P. Mohanty, P. Kumar, J. Naduvath, G. Vivekanand, Dye sensitized solar cells: a review, Tans. Ind. Ceram. Soc. 71 1 1-15, 20012.10.1080/0371750X.2012.689503 ↗
6. Hierarchically structured porous materials for energy conversion and storage10.1002/adfm.201200591 ↗
7. Enhanced conversion efficiencies for pillar array solar cells fabricated from crystalline silicon with short minority carrier diffusion lengths10.1063/1.3432449 ↗
8. Hybrid silicone nanocone-polymer solar cells10.1021/nl300713x ↗
9. Semiconductor nanowire optical antenna solar absorbers10.1021/nl9036627 ↗
10. Influence of scattering layer on efficiency of dye-sensitized solar cells10.1016/j.solmat.2005.07.002 ↗
11. Fabrication of thin film dye sensitized solar cells with solar electric power conversion efficiency over 10%10.1016/j.tsf.2007.05.090 ↗
12. Light trapping properties of pyramidally textured surfaces
13. Influence of texture feature size on the optical performance of silicon solar cells10.1002/pip.571 ↗
14. Angular response of photonic crystals based dye sensitized solar cells10.1039/c3ee23609a ↗
15. Hierarchically porous TiO2 electrodes fabricated by dual templating methods for dye-sensitized solar cells10.1002/adma.201101042 ↗
16. Porous “sponge-like” anatase TiO2 via polymer templates: synthesis, characterization, and performance as light-scattering material10.1007/s00396-012-2792-x ↗
17. Diatom frustules as light traps enhance DSSC efficiency10.1039/C2NR32716C ↗
18. Colloidal quantum dot solar cells exploiting hierarchical structuring10.1021/nl504086v ↗
19. Advances in 3D nano/microfabrication using two-photon polymerization10.1016/j.progpolymsci.2008.01.001 ↗
20. Fabrication of silicon inverse woodpile photonic crystals10.1002/adfm.200601074 ↗
21. Photonic amorphous diamond structure with a 3D photonic band gap10.1103/PhysRevLett.100.013901 ↗
22. Photonic wire bonding: a novel concept for chip scale interconnects10.1364/OE.20.017667 ↗
23. Fabrication of three-dimensional photonic crystals using multi-beam interference lithography and electrodeposition10.1002/adma.200802085 ↗
24. Multiphoton polymerisation10.1016/S1369-7021(07)70130-X ↗
25. Scanning photocurrent microscopy analysis of Si nanowire field-effect transistors fabricated by surface etching of the channel10.1021/nl803924z ↗
26. Mapping spatial hetrogeneity in Cu(In(1-x)Ga(x))Se2 nanocrystal-based photovoltaics with scanning photocurrent and fluorescence microscopy10.1002/smll.201001274 ↗
27. Spatial Mapping of efficiency of GaN/InGaN, nanowire array solar cells using scanning photocurrent microscopy10.1021/nl402331u ↗
28. Review of microcrack detection techniques for silicon solar cells10.1109/JPHOTOV.2013.2285622 ↗
29. Criticality of cracks in PV modules10.1016/j.egypro.2012.07.125 ↗
30. The risk of power loss in crystalline silicone based photovoltaic modules dude to micro-cracks10.1016/j.solmat.2010.10.034 ↗
31. Impact of micro-cracks on the degradation of solar cell performance based on two-diode model parameters10.1016/j.egypro.2012.07.046 ↗
32. Reduction of crack formation in TiO2 mesoporous films prepared from binder-free nanoparticles pastes via incorporation of electrospun SiO2 or TiO2 nanofibers for dye-sensitized solar cells10.1016/j.nanoen.2015.01.045 ↗
33. Studies of Effects of crystalline sizes and scattering layers on the conversion efficient of dye-sensitized solar cells10.4236/jpee.2014.212004 ↗
34. Failure mechanism for flexible dye-sensitized solar cells under repeated outward bending: cracking and spalling of nano-porous titanium dioxide film
35. An applied light-beam induced current study of dye-sensitized solar cells: photocurrent uniformity mapping and true photoactive area evaluation10.1063/1.4890935 ↗
36. Photovoltaic performance enhancement in dye-sensitized solar cells with periodic relief structure10.1080/10601320903340283 ↗
37. Enhancing energy absorption in quantum dot solar cells via periodic light-trapping microstructures10.1088/2040-8978/18/9/094002 ↗
38. Templated titania films with meso- and macroporosities10.1016/j.matlet.2006.08.076 ↗
39. Holographically defined TiO2 electrodes for dye-sensitized solar cells10.1021/am100681f ↗