Adjustment of alkali element incorporations in Cu(In,Ga)Se2 thin films with wet chemistry Mo oxide as a hosting reservoir
Source abstract
Abstract
Abstract Thin film Cu(In,Ga)Se 2 solar cells remain one of the most promising devices for commercial photovoltaic panels. Aimed at high quality absorber film, alkali elements such as sodium and potassium incorporation can improve the crystal structure and electrical properties of the Cu(In,Ga)Se 2 film. However, the precise control on sodium content as well as the incorporation mechanisms is yet comprehensively understood. We propose a facile wet chemistry oxidation approach for large area homogeneous Mo oxidation and allow for uniform sodium incorporation in a controllable manner. Eventually the oxidized Mo substrate in an optimal condition leads to a relative increase of 8% of conversion efficiency in the final solar device compared with the non-oxidized sample. We thoroughly examine the surface chemistry of the Mo substrate with X-ray photoelectron spectroscopy after a systematic H 2 O 2 oxidation treatment. A qualitative analysis show that the predominant Mo trioxides as a reservoir can adjust alkali elements contents in Cu(in,Ga)Se 2 films. Upon oxidation, the narrowing down of Mo grain boundaries has now suppressed the over sufficient sodium incorporation compared to uncontrolled diffusion from soda lime glass. Also, the emergence of potassium element in the thin film improves the electrical properties. Thermodynamic calculation indicate that the K 2 MoO 4 as an intermediate from K 2 O and MoO 3 reaction is a preferable reaction path compared the Na 2 O reaction and thus enhanced potassium ion diffusion. We have correlate the sodium contents by simply adjusting the H 2 O 2 treatment time to improved Cu(InGa)Se 2 film qualities, e.g., crystal structures, grain sizes, charge carrier concentrations and defect densities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. A recombination analysis of Cu(In,Ga)Se2 solar cells with low and high Ga compositions10.1016/j.solmat.2014.01.047 ↗
2. Systematic survey of suitable buffer and high resistive window layer materials in CuIn1−xGaxSe2 solar cells by numerical simulations10.1016/j.solmat.2016.12.035 ↗
3. Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
4. Advantageous light management in Cu(In,Ga)Se2 superstrate solar cells10.1016/j.solmat.2016.02.005 ↗
5. Influence of iron on the performance of CIGS thin-film solar cells10.1016/j.solmat.2014.06.038 ↗
6. The influence of defects on the cellular open circuit voltage in CuInGaSe2 thin film solar modules—an illuminated lock-in thermography study10.1016/j.solmat.2014.01.014 ↗
7. CIGS solar cells on ultra-thin glass substrates: determination of mechanical properties by nanoindentation and application to bending-induced strain calculation10.1016/j.solmat.2016.11.022 ↗
8. Electronic structure study of the CdS buffer layer in CIGS solar cells by X-ray absorption spectroscopy: experiment and theory10.1016/j.solmat.2016.01.043 ↗
9. CIGS-based solar cells prepared from electrodeposited stacked Cu/In/Ga layers10.1016/j.solmat.2013.01.028 ↗
10. Effect of annealing treatment on CdS/CIGS thin film solar cells depending on different CdS deposition temperatures10.1016/j.solmat.2015.05.052 ↗
11. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
12. Influence of Mo back contact porosity on co-evaporated Cu(In,Ga)Se2 thin film properties and related solar cell10.1002/pip.1193 ↗
13. Optimization of molybdenum thin films for electrodeposited CIGS solar cells10.1016/j.solmat.2010.12.011 ↗
14. Y. Ju-Heon, Y. Kwan-Hee, K. Jong-Keun, K. Won-Mok, P. Jong-Keuk, T.-S. Lee, B. Young-Joon, T.-Y. Seong, J.-h. Jeong, Effect of the Mo back contact microstructure on the preferred orientation of CIGS thin films, in: Proceedings of the 2010 35th IEEE Photovoltaic Specialists Conference (PVSC), 2010, pp. 002443–002447.10.1109/PVSC.2010.5614175 ↗
15. Formation of an interfacial MoSe2 layer in CVD grown CuGaSe2 based thin film solar cells10.1016/S0040-6090(03)00261-X ↗
16. F.S. Hasoon, H.A. Al-Thani, The formation of the MoSe2 layer at Mo/CIGS interface and its effect on the CIGS device performance, in: Proceedings of the 2016 IEEE 43rd Photovoltaic Specialists Conference (PVSC), 2016, pp. 1469–1473.10.1109/PVSC.2016.7749861 ↗
17. Raman and XPS studies of CIGS/Mo interfaces under various annealing temperatures10.1016/j.matlet.2014.08.087 ↗
18. Reducing the Schottky barrier height at the MoSe2/Mo(110) interface in thin-film solar cells: insights from first-principles calculations10.1016/j.tsf.2016.03.053 ↗
19. First-principles investigation of the bulk and low-index surfaces of MoSe210.1103/PhysRevB.89.205301 ↗
20. Effects of NaF coevaporation on structural properties of Cu(In,Ga)Se2 thin films10.1016/S0040-6090(03)00246-3 ↗
21. G. Hanna, S. Schleussner, G. Bilger, H.W. Schock, U. Rau, J.H. Werner, Na diffusion in the Cu(In,Ga)Se2/Mo/glass system, in: Proceedings of World Conference on Photovoltaic Energy Conversion, vol. 361, 2003, pp. 368–371.
22. H.A. Al-Thani, M. Young, S. Asher, F.S. Hasoon, Microstructure characterization of Mo back contact used for CIGS based solar cell, in: 2008 Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, 2008, pp. 1–4.10.1109/PVSC.2008.4922873 ↗
23. Electrical properties of CIGS/Mo junctions as a function of MoSe2 orientation and Na doping10.1002/pip.2377 ↗
24. Cu(In,Ga)Se2 solar cells with varying Na content prepared on nominally alkali-free glass substrates10.1109/JPHOTOV.2013.2247655 ↗
25. Na-induced efficiency boost for Se-deficient Cu(In,Ga)Se2 solar cells10.1002/pip.2600 ↗
26. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
27. Effect of a Mo back contact on Na diffusion in CIGS thin film solar cells10.1002/pip.2193 ↗
28. Structure and interface chemistry of MoO3 back contacts in Cu(In,Ga)Se2 thin film solar cells10.1063/1.4862404 ↗
29. The importance of back contact modification in Cu2ZnSnSe4 solar cells: the role of a thin MoO2 layer10.1016/j.nanoen.2016.06.034 ↗
30. Improved rear surface passivation of Cu(In,Ga)Se2 solar cells: a combination of an Al2O3 rear surface passivation layer and nanosized local rear point contacts10.1109/JPHOTOV.2013.2287769 ↗
31. Employing Si solar cell technology to increase efficiency of ultra-thin Cu(In,Ga)Se2 solar cells10.1002/pip.2527 ↗
32. K. Kihwan, X. Peipei, Y. Jaeho, W.N. Shafarman, VOC enhancement of sub-micron CIGS solar cells by sulfization of the Mo surface, in: Proceedings of the 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC), 2015, pp. 1–4.10.1109/PVSC.2015.7355621 ↗
33. Effects of Mo surface oxidation on Cu(In,Ga)Se2 solar cells fabricated by three-stage process with KF postdeposition treatment10.7567/JJAP.55.022304 ↗
34. Determination of activation barriers for the diffusion of sodium through CIGS thin-film solar cells10.1002/pip.515 ↗
35. Understanding the role of oxygen in the segregation of sodium at the surface of molybdenum coated soda-lime glass10.1002/aic.14425 ↗
36. Incorporation of alkali metals in chalcogenide solar cells10.1016/j.solmat.2015.06.011 ↗
37. Delahoy · 2000
38. High‐efficiency CuInxGa1−xSe2 solar cells made from (Inx,Ga1−x)2Se3 precursor films10.1063/1.112670 ↗
39. NIST X-ray Photoelectron Spectroscopy Database, 〈https://srdata.nist.gov/xps/EngElmSrchQuery.aspx?EType=PE&CSOpt=Retri_ex_dat&Elm=Mo〉.
40. Control of the preferred orientations of Cu(In,Ga)Se2 films and the photovoltaic conversion efficiency using a surface-functionalized molybdenum back contact10.1002/pip.2338 ↗
41. The effect of NaF on Cu(In,Ga)Se2 thin film solar cells10.1016/S0927-0248(99)00089-6 ↗
42. Diode quality factor determination for thin-film solar cells10.1016/0379-6787(89)90050-1 ↗
43. Electronic loss mechanisms in chalcopyrite based heterojunction solar cells10.1016/S0040-6090(99)00762-2 ↗
44. CIGS thin-film solar cells and modules on enamelled steel substrates10.1016/j.solmat.2012.01.004 ↗
45. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
46. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
47. Influence of Ni and Cr impurities on the electronic properties of Cu(In,Ga)Se2 thin film solar cells10.1002/pip.2503 ↗
48. Effects of series resistance and inductance on solar cell admittance measurements10.1016/0927-0248(95)00016-X ↗
49. Meyer–Neldel behavior of deep level parameters in heterojunctions to Cu(In,Ga)(S,Se)210.1063/1.117352 ↗
50. Defect level signatures in CuInSe2 by photocurrent and capacitance spectroscopy10.1016/j.tsf.2012.12.084 ↗