Predicting, categorizing and intercomparing the lifetime of OPVs for different ageing tests
Source abstract
Abstract
The presented work addresses the issue of lifetime prediction and intercomparison for organic photovoltaic (OPV) devices tested under different environmental conditions according to ISOS guidelines proposed recently at the International Summit on Organic Photovoltaic Stability. The studies employed P3HT:PCBM based devices produced with different architectures and methods ranging from spin coating to roll-to-roll manufacturing. The purpose of the chosen diversity was to establish the possible spread in the ageing rates generated by different architectures. A logarithmic lifetime diagram associated with the common time units was used for presenting the ageing data, which regardless of the spread in the lifetimes allowed categorizing the level of the stability of P3HT:PCBM based devices tested under different ageing conditions. Moreover, the approach also allowed for estimating the acceleration factors between the moderate and harsh ISOS test conditions employed in the study, as well as identifying the level of improvement of the device stability after encapsulation. The effects of different device architectures and encapsulation techniques on ageing rates of the samples were also studied. This report presents the early steps towards establishing a prediction tool for identifying the lifetime of OPV devices under operational conditions based on the tests under harsh (accelerated) conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. 〈http://www.heliatek.com/newscenter/latest_news/neuer-weltrekord-fur-organische-solarzellen-heliatek-behauptet-sich-mit-12-zelleffizienz-als-technologiefuhrer/?lang=en〉
2. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
3. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
4. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
5. Degradations of silicon photovoltaic modules: a literature review10.1016/j.solener.2013.07.005 ↗
6. Accelerated weathering testing principles to estimate the service life of organic PV modules10.1016/j.solmat.2010.08.033 ↗
7. Determination of the degradation constant of bulk heterojunction solar cells by accelerated lifetime measurements10.1007/s00339-003-2499-4 ↗
8. Accelerated lifetime measurements of P3HT:PCBM solar cells10.1016/j.synthmet.2005.06.016 ↗
9. A setup for studying stability and degradation of polymer solar cells10.1016/j.solmat.2008.02.008 ↗
10. An Arrhenius approach to estimating organic photovoltaic module weathering acceleration factors10.1016/j.solmat.2011.02.013 ↗
11. Degradation of semiconducting polymers by concentrated sunlight10.1016/j.solmat.2010.09.022 ↗
12. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
13. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
14. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
15. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
16. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
17. Angmo · J. Appl. Polym. Sci. · 2013 · 130 · 94410.1002/app.39200 ↗
18. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules10.1016/j.solmat.2011.09.064 ↗
19. A laboratory scale approach to polymer solar cells using one coating/printing machine, flexible substrates, no ITO, no vacuum and no spincoating10.1016/j.solmat.2012.09.008 ↗
20. Freely available OPV—the fast way to progress10.1002/ente.201300057 ↗
21. Gevorgyan · J. Polym. Degrad. Stab. · 2014