journal article·2011-06Open access

CuIn1−Ga Se2 growth process modifications: Influences on microstructure, Na distribution, and device properties

S. Seyrling, A. Chirila, D. Güttler, P. Blösch, F. Pianezzi, R. Verma, S. Bücheler, S. Nishiwaki, Y.E. Romanyuk, P. Rossbach, A.N. Tiwari

Abstract

Abstract Co-evaporation of Cu, In, Ga, and Se to form CuIn 1− x Ga x Se 2 is known to yield high efficiency solar cells and modules. Highest efficiencies are achieved when using a multi-stage co-evaporation process, where the Cu–In–Ga–Se film enters a Cu rich composition during an intermediate stage of the growth. Furthermore, incorporation of sodium is crucial for high performance devices. We investigated the influence of varying the evaporation profile, especially the Cu excess during growth, on the microstructure of the final CIGS layer, on the distribution of sodium through the layer, and on the photovoltaic performance. Experiments were performed on CIGS layers grown at substrate temperatures of 450 and 600 ∘ C . With increasing maximum [Cu]/[In+Ga] ratio during the deposition, an increase in grain size of the CuIn 1− x Ga x Se 2 layer is observed. For high temperature grown samples, best efficiencies are achieved using minimal Cu excess during the second stage of the growth process. Results show a change in the sodium distribution across the absorber thickness for layers grown at high temperature when the duration of the Cu rich growth regime is changed. We observed that for layers exposed to a Cu rich regime for a short timeframe, Na accumulates at the surface of the layer while for longer exposure times it is more evenly distributed in the top region of the CIGS layer. Evidence for the suppression of the growth of a group III rich phase (ordered vacancy compound) by Na is found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Zentrum für Solarenergie und Wasserstoffforschung, press release 11/2010, Stuttgart, July 27, 2010.
2. W.N. Shafarman, L. Stolt, Cu(InGa)Se2 solar cells, in: A. Luque, S. Hegedus (Eds.), Handbook of Photovoltaic Science and Engineering, 2005, pp. 567–616.
3. High-efficiency CuIn1−xGaxSe2 solar cells made from (In1−xGax)2Se3 precursor films10.1063/1.112670 ↗
4. D. Rudmann, A.F. da Cunha, M. Kaelin, F.-J. Haug, H. Zogg, A.N. Tiwari, Effects of Na on the growth of CuIn1−xGaxSe2 thin films and solar cells, in: Proceedings of the MRS Spring Meeting, vol. 763, San Francisco, USA, 2003, pp. B1.9.1–B1.9.1210.1557/PROC-763-B1.9 ↗
5. The electronic effects of point defects in CuIn1−xGaxSe210.1016/S0040-6090(99)00766-X ↗
6. Preparation of CuIn1−xGaxSe2 thin films at low substrate temperatures10.1557/JMR.2001.0059 ↗
7. Physical vapor deposition of CuInX2 (X= S, Se) thin films: a model for the growth mechanism10.4028/www.scientific.net/SSP.37-38.509 ↗
8. Growth of CuInSe2 crystals in Cu-rich Cu–In–Se thin films10.1557/JMR.1997.0200 ↗
9. Effects of the surface Cu2−ySe phase on the growth and properties of CuInSe2 films10.1063/1.123639 ↗
10. S. Seyrling, A. Chirila, D. Güttler, F. Pianezzi, P. Rossbach, A.N. Tiwari, Modification of the three-stage evaporation process for CuIn1−xGaxSe2 absorber deposition, Thin Solid Films, in press, doi:10.1016/j.tsf.2010.12.146.10.1016/j.tsf.2010.12.146 ↗
11. Impact of Cu-rich growth on the CuIn1−xGaxSe2 surface morphology and related solar cells behaviour10.1016/j.solmat.2009.08.004 ↗
12. Cu deficiency in multi-stage co-evaporated Cu(In,Ga)Se2 for solar cells applications: microstructure and Ga in-depth alloying10.1016/j.actamat.2010.02.021 ↗
13. B.M. Basol, V.K. Kapur, C.R. Leidholm, A. Minnick, A. Halani, Studies on substrates and contacts for CIS films and devices, in: Proceedings of the 1st World Conference on Photovoltaic Energy Conversion, New York, 1994, pp. 148–151.10.1109/WCPEC.1994.519829 ↗
14. D.F. Dawson-Elli, C.B. Moore, R.R. Gay, C.L. Jensen, Substrate influences on CIS device performance, in: Proceedings of the 1st World Conference on Photovoltaic Energy Conversion, New York, 1994, pp. 152–155.10.1109/WCPEC.1994.519830 ↗
15. M.A. Contreras, B. Egaas, P. Dippo, J. Webb, J. Granata, K. Ramanathan, S. Asher, A. Swartzlander, R. Noufi, On the role of Na and modifications to Cu(In,Ga)Se2 absorber materials using thin-MF (M=Na, K, Cs) precursor layers [solar cells], in: Proceedings of the 26th IEEE Photovoltaics Specialists Conference, 1997, pp. 359–362.10.1109/PVSC.1997.654102 ↗
16. The effect of NaF on Cu(In,Ga)Se2 thin film solar cells10.1016/S0927-0248(99)00089-6 ↗
17. M. Ruckh, D. Schmid, M. Kaiser, R. Schäffler, T. Walter, H.W. Schock, Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin films, in: Proceedings of the 1st World Conference on Photovoltaic Energy Conversion, New York, 1994, pp. 156–159.10.1109/WCPEC.1994.519831 ↗
18. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
19. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
20. Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation10.1063/1.1646758 ↗
21. D. Güttler, A. Chirila, S. Seyrling, P. Blösch, S. Bücheler, X. Fontané, V. Izquierdo-Roca, L. Calvo-Barrio, A. Peréz-Rodriguez, J.R. Morante, A. Eicke, A.N. Tiwari, Influence of NaF Incorporation during Cu(In,Ga)Se2 Growth on Microstructure and Photovoltaic Performance, in: Proceedings of the 36th IEEE Photovoltaics Specialists Conference, Honolulu, 2010.10.1109/PVSC.2010.5614564 ↗